• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.216-221
• /
• 2017

Reducing optical reflection in the visible light range, in order to increase the share of transmitted light and avoid the formation of ghost images in imaging, is important for polymer lens applications. In this study, polymer lenses with refractive indices of n=1.56, 1.60, and 1.67 were fabricated by the injection-molding method with a polymer lens monomer, dibutyltin dichloride as the catalyst and an alkyl phosphoric ester as the release agent. To investigate their anti-reflection (AR) effects, various AR coating structures, viz. a multi-layer AR coating structure, tri-layer AR coating structure with a discrete approximation Gaussian gradient-index profile, and tri-layer AR coating structure with a quarter-wavelength approximation, were designed and coated on the polymer lens by an E-beam evaporation system. The optical properties of the polymer lenses were characterized by UV-visible spectrometry. The material properties of the thin films, refractive index and surface roughness, were analyzed by ellipsometry and AFM, respectively. The most effective AR coating structure of the polymer lens with low refractive index, n=1.56, was the both side coating of multi-layer AR coating structure. However, both side coating of the tri-layered discrete approximation Gaussian gradient-index profile AR coating structure gave comparable results to the both side coating of the multi-layer AR coating structure for the polymer lens with a high refractive index of n=1.67.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.762-769
• /
• 2015

The titania ($TiO_2$) nanoparticles with a diameter 2?3 nm were synthesized by controlling hydrolysis of titanium tetraisopropoxide (TTIP) in acid solution. Organic-inorganic hybrid coating solutions were prepared by reacting the titania nanoparticles with 3-glycidoxypropyl trimethoxysilane (GPTMS) by the sol-gel method. The hard coating films with high refractive index were obtained by curing thermally at $120^{\circ}C$ after spin-coating the coating solutions on the polycarbonate (PC) sheets. The coating films showed high optical transparency of 90% in the visible range and exhibited a pencil hardness of 2H. Also, the refractive index at 633 nm wavelength of coating films enhanced from 1.502 to 1.584 as the weight content of titania nanoparticles in the coating solutions increased from 4% to 25%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.565-570
• /
• 2017

The various techniques proposed previously to obtain a good antireflection(AR) coating induce a scattering of incident light by nanoparticles or control the refractive index by using different materials. This paper compares a suggested graded index profile with the quintic index profile previously suggested for producing an index profile that gives good performance from an AR coating. We assume the structure of the AR coating has three, six, and nine layers with 180 nm total thickness. The wavelength of incident light ranges from 300 nm to 1100 nm. We use the transfer matrix theory for a single layer to obtain the reflectivity of three, six, and nine layers. The reflectivity of two different index profiles with three, six, and nine layers is compared. As a result, the suggested graded index profile shows lower reflectivity than the quintic index profile with three layers, especially in the wavelength range from about 600 nm to 1100 nm. Therefore, we expect that these results can be applied to optical devices and filters in the range from visible(red) to near infrared.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.629-637
• /
• 2016

This study examined the tongue coating index and halitosis to determine the association with the oral care behavior and variation in halitosis according to the tongue coating index, dental calculus, and the oral environment before and after scaling among 130 participants in scaling practices of the Department of Dental Hygiene at K University in Daejeon. The subjects were asked to participate in a survey, in an oral examination for the tongue coating index, dental plaque, and dental calculus status, and in halitosis measurement. The tongue coating most significantly affected halitosis and the tongue coating index was strongly correlated with smoking and tongue washing. More frequent toothbrushing, a lower level of halitosis; and nonsurgical treatment of scaling were effective in reducing halitosis; age was associated with the tongue coating index. Therefore, it will be necessary to perform good oral care and reduce the amount of dental plaque and tongue coating and undergo regular scaling with the objective of improving oral health and reducing halitosis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4139-4145
• /
• 2012

This paper shows an antireflection coating design skill for utilization the thin-film silicon solar cell in the future. The reflectivity of each index profile previously suggested as linear, cubic and quintic function has been calculated and compared. Each index profile is applied to the antireflection coating consisting of 6 layers with 180nm thickness. Also we suggest the graded index profile and compare it's reflectivity to the linear, cubic and quintic's ones. As a results we find the reflectivity generally decreases as the order goes to higher. However the reflectivity in the graded index profile shows the higher(lower) value than ones in the linear, cubic and quintic especially in the shorter(longer) wavelength range from 500 nm to below 700 nm(above 700 nm to 800 nm). Therefore we find that the graded index profile structure could be applied for the better antireflection coating design scheme especially for optical device and optical filter in the range of from deep red to infrared.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.4
• /
• pp.915-924
• /
• 1996

The purpose of this paper is to investigate the surface roughness of glass ionomer cement during initial setting time followed by applying surface coating agent. No other finishing or polishing procedure is done and each surface coating agents (varnish, adhesive, gloss, sealant) are used after filling of glass ionomer cement. Surface roughness indices(Ra) are measured and surface contours are obtained electronically by Surfcorder SEF-30D(Kosaka laboratory Ltd., Japan). The results are as follows: 1. During initial setting time, surface roughness increases slightly regardless of surface coating agents. But it is statistically insignificant. (p>0.05) 2. Among surface coating agents used, Ra indices of group using varnish are high significantly compared to other groups regardless of elapsed time.(p<0.05) Among the groups which has used other surface coating agents except for the varnish group, similar Ra index all over the experiment is obtained, when compared to control group (no agent). 3. If no surface treatment is performed, tri-cure glass ionomer cement (Vitremer) has higher Ra Index than light cure glass ionomer cement (Fuji II LC) (t<0.05). But there is no difference between two groups in Ra index if any kinds of agents are applied except for sealant. (t>0.05)

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.155-162
• /
• 2004

Different adhesives(CF-clear, arabic gum, cethylmethyl cellulose, polyvinyl alcohol, polyvinyl pyrrolidone, hydroxy propyl cellulose, methyl cellulose) and particulate matters(bentonite, kaolin, calcium carbonate, peatmoss, talcum, vermiculite, zeolite, calcium hydroxide, plaster, calcium phosphate, vermiculite + calcium carbonate, vermiculite + kaolin, vermiculite + talcum) were evaluated by coating index method. According to the weight of single coated seeds, CF-clear and polyvinyl alcohol appeared to be the best coating adhesives for red clover and tall fescue seeds. Both vermiculite and vermiculite + talc(l : 1) for red clover, and vermiculite + talc(l : 1) for tall fescue appeared to be the best particulate matter(P < 0.01). Percent friability showed excellent results for the arabic gum, CF-clear, and polyvinyl alcohol when compared to others(p < 0.01). The coating index showed high with vermiculite and vermiculite + talc(l : 1) in coating red clover seed, and talc, vermiculite, and vermiculite + talc showed good coating index in coating tall fescue seed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4131-4136
• /
• 2015

This paper compares and calculates more precisely the averaged reflectance of antireflection coating with different structure of single and 6 layer assuming the incident angle of light changing from $8^{\circ}$ to $60^{\circ}$ not like normal incidence as usual case. The reflectivity of AR coating of 6 layers with 180 nm thickness having index profile suggested as linear and quintic function and single layer with same thickness having even index are calculated and compared, when the wavelength of incident light ranges from 400 nm to 1200 nm. As the results the AR coating with 6 layers having quintic(linear) function index profile shows the lower reflectance about 11.6 %(14.6 %) than other index profiles, which is approximately 8 % lower reflectance compared with single layer case(about 19.6 %). This results could be applied for the better antireflection coating design applying to optical devices and filters.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.2
• /
• pp.288-293
• /
• 1996

Chitosan의 막형성능을 이용하여 계란의 저장성 증진 효과를 검토하기 위하여 세척란과 미세척란을 chitosan용액 1%와 2%를 이용하여 coating 처리하여 $20^{\circ}C에서$ 저장하면서 난중 감소율, yolk index, Haugh unit 및 유화력 등을 측정하여 대조구와 비교한 결과 난중 감소율은 chitosan 처리에 의해 저장 기간이 경과함에 따라 감소하는 경향을 나타내었다. Yolk index와 Haugh unit 측정결과 chitosan의 처리효과는 p<0.05 수준에서 유의성이 인정되었다. 난황의 유화력은 저장 기간이 경과함에 따라 감소하였으며 chitosan 처리구는 대조구에 비해 완만하게 감소하였다. Chitosan coating의 농도별 처리는 계란의 저장중 무처리구에 비해 품질보존 효과가 점차 뚜렷하였으며, 미세척란 보다 세척란에서 더욱 뚜렷하였다.