• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.327-339
• /
• 2022

The water-jet technique started by Bridgman can cut metal and alloys without harmful gas and fume. However, while this technique is convenient to cut metals and alloys, in the case of coated pipe, water jet induces the degradation of coatings on the pipes, and may facilitate structural failure, leakage, and loss of products. While there are many reports on the effect of water jet on cut metals and the damage of metallic materials, research on the effect of water impingement on the epoxy coatings has been little studied. In this work, we therefore control the velocity of water jet, distance between nozzle and specimen, and water temperature, and discuss the effect of water impingement on the epoxy coatings. Increasing water velocity and water temperature and reducing nozzle distance increased the degradation rates of three epoxy coatings were increased. Among three test parameters - water velocity, nozzle distance and water temperature, water temperature was relatively effective to increase the degradation rate of epoxy coatings.

• Carbon letters
• /
• 제4권3호
• /
• pp.133-139
• /
• 2003

Carbon/carbon composites are ideal candidates for a number of aerospace applications including structural materials for advanced vehicles, leading edges, structures of re-entry and hypersonic vehicles and propulsion systems. One serious defect for such application of the carbon/carbon composites is their poor oxidation resistance in high temperature oxidizing environments. SiC coating was employed to protect the composites from oxidation. It is mechanically and chemically stable under extreme thermal and oxidative environments, provides good adhesion to the substrate, and offers good thermal shock resistance. The SiC layer on the nozzle machined from the carbon/carbon composites was formed by pack-cementation method. Then, erosion characteristic of SiC coated carbon/carbon nozzle was examined by combustion test using a liquid rocket motor. The erosion rates were measured as function of combustion pressure, ratio of oxygen to fuel, combustion time, density of the composites and geometry of reinforced carbon fibre in the composites. The morphology change of the composites after combustion test was investigated using SEM and erosion mechanism also was discussed.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.313-317
• /
• 2018

Carbon-based coatings, including carbon nanotubes (CNTs), graphene, and buckyball ($C_{60}$), receive much interest because of their outstanding mechanical and electrical properties for a wide range of electromechanical component-based applications. Previous experimental results demonstrate that these carbon-based coatings are promising solid lubricants because of their superior tribological properties, and thus help prolong the lifetime of silicon-based applications. In this study, CNT coatings are deposited on a bare silicon (100) substrate by electrodynamic spraying under different deposition conditions. During the coating deposition, the applied voltage, CNT concentration of the solution, distance between the injecting nozzle and the substrate and diameter of the injecting nozzle are optimized to control the thickness and surface roughness of the CNT coatings. The surface morphology and thickness of the coatings are characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The friction and wear properties of the coatings are investigated by using a pin-on-reciprocating-type tribotester under various experimental conditions. The friction coefficient of the CNT coating is as low as 0.15 under high normal loads. The overall results reveal that CNT coatings deposited by electrodynamic spraying provide relatively uniform with superior lubrication performance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.256-256
• /
• 2013

Carbon nanotubes (CNT) / polyvinylidene fluoride (PVDF) piezoelectric composite films for nanogenerator devices were fabricated by spray coating method. When the CNT/PVDF mixture solution passes through the spray nozzle with small diameter by the compressed nitrogen gas, electric charges are generated in the liquid by a triboelectric effect. Then randomly distributed ${\beta}$ phase PVDF film could be re-oriented by the electric field resulting from the accumulated electrical charges, and might be resulted in extremely one-directionally aligned ${\beta}$ phase PVDF film without additional electric field for poling. X-ray diffraction patterns were used to investigate crystal structure of the CNT/PVDF composite films. It was confirmed that they revealed extremely large portion of the ${\beta}$ phase PVDF crystalline in the film. Therefore we could obtain the poled CNT/PVDF piezoelectric composite films by the spray coating method without additional poling process. Charge accumulation and resulting electric field generation mechanism by spray coating method were shown in Fig. 1. The capacitance of the CNT/PVDF films increased by adding CNTs into the PVDF matrix, and finally saturated. However, the I-V curves didn't show any saturation effect in the CNT concentration range of 0~4 wt%. Therefore we can control the performance of the devices fabricated from the CNT/PVDF composite film by adjusting the current level resulted from the CNT concentration with the uniform capacitance value.

• 한국식품영양과학회지
• /
• 제31권4호
• /
• pp.648-652
• /
• 2002

굴의 레토르트 가공적성을 향상시키기 위하여 굴에 포함되어 있는 섭을 제거하는 방법과 가식성 보호피막제를 사용하여 보호피막을 입히는 방법 및 그 효과에 대하여 연구하였다. 굴중의 섭을 제거하기 위하여 공기방울을 불어 올리는 방법을 사용하였는데 세척유속과 노즐의 기공 크기는 섭 제거에 있어서 중요한 요인이었다. 섭 제거 효율과 패육의 보호를 고려하여 각 회의 처리 시간을 1분간으로 하고 45 L/fin으로 하는 경우는 2회 세척이 적절한 것으로 판단되며 , 노즐의 기공 크기는 0.4mm의 노즐을 사용하는 것이 유리할 것으로 사료된다. 기본 피막제로서는 sodium alginate가 적당하였으나 피막제의 농도가 높을수록 보호 피막이 잔존하여 식감을 떨어뜨리는 단점이 있었다. 피막능력을 개선시키기 위하여 보조피막제를 검토한 결과, 탈지분유>찰옥수수전분>Purity CSC>백옥분>carboxymethylcellulose 순으로 좋게 나타났다. 따라서 피막제의 조성은 sodium alginate 1.5%와 탈지 분유 0.9%가 보호피막제로서 가장 적합한 것으로 판단되었다. 보호피막을 입힌 굴을 이용하여 제조한 죽은 피막을 입히지 않은 굴과 비교한 결과 레토르트 직후에는 대조군과 색도나 안정성에서 큰 차이를 보이지 않았으나 상온에서의 저장기간이 길어짐에 따라 보호피막에 의한 효과가 크게 나타났다. 결론적으로 섭을 제거한 굴에 보호피막을 입힘으로써 굴죽의 제조 공정 중에 발생될 수 있는 물리적 손상으로부터 굴의 형체가 보호되었으며 굴죽의 저장시 발생되는 갈변현상을 방지하여 가공적성이 향상됨을 확인할 수 있었다.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제4권2호
• /
• pp.93-99
• /
• 2016

엔진 성능 혹은 효율의 극대화는 엔진 구성품들을 점점 더 극한의 환경에서 장시간 운용되게 요구하고 있다. 이를 위해 엔진 제작사 혹은 연구소는 초내열합금, 냉각 설계 최적화, 열차폐 코팅 개선 등의 노력과 동시에 재료 모델링, 유한요소해석, 최적설계 등의 수치 해석 기법을 적용하여 좀 더 정교한 설계 및 해석을 수행하고 있다. 본 연구에서는 연소기 뒤에 위치하는 1 단 고압터빈 노즐의 끝벽 냉각 설계와 열차폐 코팅에 따른 일방향 응고 재료인 1 단 고압터빈 블레이드의 저주기 피로 수명에 대한 영향을 고찰하고자 한다. 이를 위해 경계 조건인 고온 및 고압의 연소 가스에 의한 노즐 및 블레이드의 금속 온도는 복합 열 전달 해석을 통해 얻고, 이 결과를 받아 블레이드의 구조 해석 및 저주기 피로수명을 평가하여 노즐 냉각설계와 열차폐 코팅의 영향을 분석하였다.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.38-45
• /
• 2015

In this study, two computational methodologies were compared to consider an effective conjugate heat transfer analysis technique for the cooled vane with thermal barrier coating. The first one is the physical modeling method of the TBC layer on the vane surface, which means solid volume of the TBC on the vane surface. The second one is the numerical modeling method of the TBC layer by putting the heat resistance interface condition on the surface between the fluid and solid domains, which means no physical layer on the vane surface. For those two methodologies, conjugate heat transfer analyses were conducted for the cooled vane with TBC layer having various thickness from 0.1 mm to 0.3 mm. Static pressure distributions for two cases show quite similar patterns in the overall region while the physical modeling shows quite a little difference around the throat area. Thermal analyses indicated that the metal temperature distributions are quite similar for both methods. The results show that the numerical modeling method can reduce the computational resources significantly and is quite suitable method to evaluate the overall performance of TBC even though it does not reflect the exact geometry and flow field characteristics on the vane surface.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.18-23
• /
• 2016

Injection molded thermoplastic parts may need to be coated to facilitate paint adhesion, or to satisfy other surface property requirements, such as appearance, durability, and weather resistance. In this paper, a two-component polyurethane metering system was developed for the simultaneous injection and surface coating of a plastic substrate. The system was composed of storage tanks, feed pumps, axial piston pumps, mixing head. The tank was designed to be double-jacket structured and fabricated for polyol and isocyanate, respectively. A temperature chamber was used to maintain the material temperature to be $80^{\circ}C$ during flowing from storage tank to mixing head. Inside the chamber, feed pump, low pressure filter, high pressure pump, high pressure filter, pressure sensor, flow meter were installed. A mixing head of L-type was used for homogeneous mixing of polyol and isocyanate. Inside the mixing head, a cartridge heater and a temperature sensor were installed to control the temperature of the materials. The flow rate of axial-piston pump was controlled by using closed-loop feedback control algorithm. The input flow-rates were compared with the measured values. The output error was 6.7% for open-loop control, whereas the error was below 2.2% for closed-loop control. In addition, the pressure generated through mixing-head nozzle increased with increasing flow rate. It was found that the pressure drop between metering pump and mixing-head nozzle was almost 10 bar.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.55-59
• /
• 1999

초임계 분출법을 이용하여 입자의 코팅을 행하였다. 핵입자로는 분무건조법으로 제조된 Microcapsule을 사용하였으며, 코팅 물질로는 녹는 점이 다른 두 종류의 파라핀을 사용하였다. 파라핀이 녹아 있는 초임계 $CO_{2}$ 용액은 공 기에 의해 유통중인 유통층 내부로 작은 직경의 노즐을 통해 분출된다. 이 때 추출조의 온도와 압력은 각각 $50~120^{\circ}C$, $150~200\;kg/\textrm{cm}^2$으로 변화시켰다. 이론적인 코팅 두께를 계산하였으며, 코팅층의 분석은 SEM과 FT-IR을 사용하였다. $Mg^{2+}$ ion의 용출특성은 원자홉광광도계를 사용하여 조사하였다.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.118-124
• /
• 2016

In this study, experiments are conducted to improve spray coating uniformity by using second and third electrodes based on the electrospray atomization mechanism. The uniformity of fabricated thin films can be improved by adjusting the design of the second electrode. The implementation of the second electrode with an elongated hole and a bending angle of $90^{\circ}$ results in highly uniform films. In addition, induced area to substrate is increased by lowering the applied voltage using the third electrode with a round rod shape. A linear correlation between applied voltage and induced area is confirmed. Thin film thickness and surface roughness are measured after the fabrication of thin films through the electrospray process. It is confirmed that a thin film is formed having an average thickness of 273.44 nm, a thickness uniformity of less than 10%, and a surface roughness of 3 nm.