• 보존과학회지
• /
• 제33권3호
• /
• pp.203-214
• /
• 2017

본 연구에서는 야외 플라스틱 작품에 많이 사용되고 있는 유리섬유강화플라스틱(FRP)을 대상으로 자외선에 의한 색도 및 광택도, 접촉각 변화, 적외선 분광분석을 통해 열화 특성을 확인하였으며, FRP의 열화를 예방하고자 자외선 차단 코팅제를 제조하여 코팅제의 성능 평가를 진행하였다. 자외선 열화 결과, FRP의 표면변화는 기공 이외에 다른 변화는 관찰되지 않았다. 색차는 열화 초기에 급격히 증가하였는데 이는 적외선 분광분석 결과와도 유사하였다. 광택도 및 접촉각의 경우 뚜렷한 변화는 확인되지 않았다. 코팅제 처리에 따른 특정한 표면 변화는 관찰되지 않았으나 색차 비교 결과, 미처리 시편보다 색 변화가 낮게 측정되어 변색 제어가 가능함을 확인하였다. 코팅제 도포 후 열화에 따른 광택도 및 접촉각 변화가 일부 관찰되었으나 자외선 차단 코팅제는 상대적으로 안정한 것으로 나타났다. 적외선 분광분석 결과, 화학적 변화가 미미함에 따라 코팅제가 일정 기간 동안 열화를 지연시키는 것으로 보인다. 본 연구를 통해 작품 재료로써 FRP의 자외선 열화 양상을 파악하였으며, 제조한 자외선 차단 코팅제의 성능 평가를 통해 야외 FRP 작품의 보존 방안으로써 적용 가능성을 확인하였다.

• 고문화
• /
• 66호
• /
• pp.87-112
• /
• 2005

Stain removal on ivory has been, for a long time, considered an undesirable treatment in conservation field because ivory is hygroscopic and anisotropic, having different physical properties in different directions. Cyclododecane, which sublimes at room temperature, has been investigated for its use in conservation field since 1995, as a reversible temporary consolidant, sealing agent or coating, water repellent, and barrier layer. This research aims to remove stains on ivory, temporarily protecting the none-stained area or painted area from methanol, acetone or the aqueous cleaning system using cyclododecane as a hydrophobic sealing agent. This research also aims to obtain information regarding whether cyclododecane can be safely and effectively used on archaeological wet ivory. Melted cyclododecane and saturated solutions of cyclododecane in mineral spirits, and hexanes were applied to ivory samples. Application methods, working properties of cyclododecane on ivory, and effect of cyclododecane coating on moisture content of wet ivory were evaluated. The sealing layer formed by molten cyclododecane or by saturated cyclododecane solution in hexane or saturated cyclododecane solution in mineral spirits did not form a secure contact with the surface of the highly polished ivory. The sealing formed with two different layers, in which saturated cyclododecane solution in hexane was applied initially and then molten cyclododecane was applied over the first layer, was found to securely protect the painted area. When the wet samples were kept in 100% RH environments for a month, active mold growths were observed except in the samples sealed with molten cyclododecane. In conclusion, cyclododecane was an efficient hydrophobic sealing agent to protect painting area while cleaning stains on ivory. It also prevented mold growing on wet ivory and wet bone. Evenness of cyclododecane film on ivory will be determined in UV light. Analytical techniques will include visual observation, polarized light microscopy, Scanning Electron Microscope, and Gas Chromatography.

• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.317-322
• /
• 2012

미세 조직은 SEM, FT-IR 스펙트라, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스같은 금속코팅에 더욱더 중요한 열경화 무용제 수지를 합성 하였다. 이 수지는 일반적 도료와 비교하여 매우 강도가 강하고 내구성이 매우 좋다. 폴리우레탄 수지는 폴리올, IPDI, 실리콘 계면활성제, 촉매, 충전제로 구성된다. 폴리우레탄 화합물은 가교제가 첨가된 수지가 가교제가 첨가되지 않은 수지보다 물성이 우수함을 나타냈다. 견고한 폴리우레탄 도료의 기계적 특성은 [NCO]/[OH]와 가교제가 증가함에 따라 강도가 증가하였다. 합성한 도료의 물성 향상은 스테인레스 산업뿐만 아니라 다양한 산업에서 폴리우레탄 고분자 수지가 강구조물의 보수보강에 많은 응용이 기대된다.

• 한국콘텐츠학회논문지
• /
• 제10권10호
• /
• pp.219-225
• /
• 2010

티타늄 표면처리방법 중 gold 코팅, TiN 코팅, 그리고 전용결합재를 복합적으로 사용하여 티타늄과 세라믹의 결합강도에 미치는 영향을 분석하고자 하였다. 티타늄과 세라믹의 3점 굽힘 결합강도를 측정한 결과, TiN 코팅과 전용결합재로 처리한 SPTB군이 $72.20({\pm}5.25)MPa$로 가장 높게 나타났으며, 전용결합재로 처리한 SPB군($67.66({\pm}12.10)MPa$), gold 코팅과 전용결합재로 처리한 SPGB군($46.95({\pm}12.48)MPa$), 코팅과 전용결합재로 처리하지 않은 SP군$(43.80({\pm}5.12)MPa)$ 순으로 나타났다. 시편들의 결합강도를 통계 분석한 결과, 전용 결합재로 처리한 SPB군과 TiN코팅과 전용결합재로 처리한 SPTB군이 결합력이 유사하게 나타났으며, 전용결합재로 처리한 군(SPB)이 처리하기 않은 군(SP)에 비하여 결합력이 높게 나타났으며, TiN 코팅한 군(SPTB)이 gold 코팅한 군(SPGB)에 비하여 결합력이 높게 나타난 것으로 관찰되었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1967-1971
• /
• 2013

Aim of our study is finding adsorbents suitable for pre-concentration of chemical warfare agents (CWAs). We considered Tenax, bare silica and polydimethylsiloxane (PDMS)-coated silica as adsorbents for dimethyl methylphosphonate (DMMP) and dipropylene glycol methyl ether (DPGME). Tenax showed lower thermal stability, and therefore, desorption of CWA simulants and decomposition of Tenax took place simultaneously. Silica-based adsorbents showed higher thermal stabilities than Tenax. A drawback of silica was that adsorption of CWA simulant (DMMP) was significantly reduced by pre-treatment of the adsorbents with humid air. In the case of PDMS-coated silica, influence of humidity for CWA simulant adsorption was less pronounced due to the hydrophobic nature of PDMS-coating. We propose that PDMS-coated silica can be of potential importance as adsorbent of CWAs for their pre-concentration, which can facilitate detection of these CWAs.

• 한국미생물·생명공학회지
• /
• 제23권2호
• /
• pp.243-248
• /
• 1995

Agrochemicals for the plant-disease control are criticized severely for causing environmental pollution and residual problems, and consequently microbial disease control agents are expected to be safer and more economical for sustainable agriculture. Treatment of biological control agents to seed requires the use of effective delivery systems that allow full expression of the benefical qualities of the bioprotectant. For the activation and establishment of bioprotectant around the plant seed which are able protect the seeds and seedlings from pathogen attack, the optimal liquid coating formulation was obtained using 2% sodium carboxymethyl cellulose (binder), 20% sesame dregs (solid particulate material), and dried spore of Bacillus subtilis YBL-7 (bioprotectants, 10 mg/g of seed). Suppressive of root rot was demonstrated in pot trials with coated kidney bean (Phaseolus vulgaris L.) seeds. Coated seeds with B. subtilis YBL-7 spore in F. solani-infested soil reduced disease incidence by 85% to 90% after 30 days.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.54.2-54.2
• /
• 2011

DTBP (dimethyl 3,3`-dithiobispropionimidate) was applied to collagen and gelatin coating on BCP granules and a crosslinking agent. The DTBP crosslinking was done for decreasing the solubility of the coating and hence increasing the stability. The nanostructure of collagen and gelatin coating surfaces were observed by SEM technique. Based on the DSC thermograms and FT-IR spectrums, the crosslinkings were confirmed between collagen molecules and gelatin molecules. The compressive strength was measured before crosslinking and after that. In-vitro study was carried out by measuring cell viability and observing cell morphology after DTBP crosslinking. Moreover, the proliferation ability of MG-63 osteoblast-like cells on the crosslinked BCP granules was evaluated by Western blot assay. The BCP granules were implanted into rabbit femur for 4 weeks and 12 weeks. The bone tissue formation was analyzed with micro-computed tomography (micro-CT) and histological analysis was also carried out by hematoxylin and eosin (H&E) staining for visualization of cells.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.240-246
• /
• 2011

UV-Curable hybrid coatings were synthesized to improve the surface properties of plastic film. Organic-inorganic coating solutions were prepared by the sol-gel method using urethane-acrylate oligomer, acrylate monomer, photo initiator and tetraethoxysilane (TEOS). Methacryloyloxypropyltrimethoxysilane(MPTMS) was used as a silane coupling agent to improve chemical interaction between inorganic phases and UV curable acrylate. In this study, the surface hardness and adhesive properties were improved with the use of inorganic component. The experimental results showed that UV-Curable hybrid films containing aliphatic urethane oligomer, hexanedioldiacrylate, trimethylolpropanetriacrylate, hydroxy dimethyl acetophenone exhibited good surface properties. Also, the optimum curing conditions were investigated.

• Corrosion Science and Technology
• /
• 제8권6호
• /
• pp.223-226
• /
• 2009

Polymer coatings are commonly applied to metal substrates to prevent corrosion in aggressive environments such as high humidity and under salt water. Once the polymer coating has been breached, for example due to cracking or scratches, it loses its effectiveness, and corrosion can rapidly propagate across the substrate. The self-healing system we will describe prevents corrosion by healing the damage through a healing reaction triggered by the actual damage event. This self-healing coating solution can be easily applied to most substrate materials, and our dual-capsule healing system provides a general approach to be compatible with most common polymer matrices. Specifically, we expect an excellent anti-corrosion property of the self-healing coatings in damaged parts coated on galvanized metal substrates.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.81-82
• /
• 2020

In this study, after applying a silicate-based impregnation and polymer-based coating to fire damaged high strength concrete, carbonation resistance was evaluated to compare and evaluate the carbonation depth according to the type of surface repair materials. As a result of the experiment, it was confirmed that the carbonation resistance was increased in the case of the concrete with the surface repair materials compared to the control specimen without the surface repair materials. In particular, in the case of the polymer-based coating agent, it was confirmed that the carbonation hardly progressed.