• Reproductive and Developmental Biology
• /
• 제34권3호
• /
• pp.175-180
• /
• 2010

Nanotechnology is currently receiving considerable attention in various fields of biotechnology. The uptake of nanoparticles by cells for labeling and tracking is a critical process for many biomedical therapeutic applications. However, nanoparticle labeling of porcine hematopoietic cells has not been demonstrated so far. In the present study, silica-coated nanoparticles conjugated with rhodamine B isothiocyanate (SR-RITC) were used to investigate the uptake of nanoparticles by porcine hematopoietic cells. Flow cytometric and confocal microscopic analyses reveled that the cells were efficiently internalized by the silica-coated nanoparticles. Furthermore, biocompatibility tests demonstrated that the SR nanoparticles were not cytotoxic, and they had no impact on proliferation. Our study demonstrates that silica-coated nanoparticles are taken up very rapidly and with high efficiency into porcine hematopoietic cells, with no apparent deleterious effects. Therefore, silica-coated nanoparticles appear to be a promising tool for tracking porcine hematopoietic cells.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2340-2348
• /
• 1992

본 연구에서는 드릴(SKH9종)에 스퍼터링법으로 Ti 중간층을 약 0.2$\mu\textrm{m}$의 두께 로 코팅한후, 그 위에 플라즈마 화학증착법으로 TiN박막을 코팅한 드릴로 드릴링 시험 을 행하여 수명을 평가하였으며, 드릴의 내마멸성 및 드릴링한 구멍 내면의 조도를 코 팅하지 않은 드릴 및 TiN 코팅한 드릴과 비교하므로서 Ti/TiN코팅처리에 의한 공구성 능 및 수명향상 효과를 평가하고자 하였다.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.9-14
• /
• 2013

In recent years, high hardness steel is used for most of the material in many areas including aircraft, nuclear power, space exploration and automotive parts. Low CBN tools are widely used in industrial field which can effectively process high hardness steel of HRC 45 or harder. The results of this study demonstrated, when high hardness steel, SCM440 is turned with Low CBN tools coated with TiN and TiAlN coatings respectively, that both the thrust force and cutting force tends to increase with more increase in cutting force than thrust force, as the feed rate increases at constant cutting speed. In addition, the size of the cutting force and thrust force does not change with the increased cutting speed at the same feed rate, but the tool life is reduced if the cutting speed is increased to shorten the machining time. Therefore, it is recommended to limit the cutting speed at 250 m/min maximum or less. Furthermore, comparing the cutting force of the three tools at the same cutting condition, Tin coating tool showed the smallest cutting force and Low CBN was the next, and the TiAlN coating tools showed the largest cutting force.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2010

Inconel 718 alloy has been applied to high temperature, high load and corrosion resistant environments due to its superior properties. However, This alloy is a difficult-to-cut nickel-based superalloy and the chipping or notch wear is mainly generated on the cutting edge of the tool. In this study, the machinability of Inconel 718 is investigated to improve tool life under various cutting conditions with TiCN-based coated ball-end mills. The cutting conditions can be suggested to improve both the tool life and machined surface quality in Inconel 718 high speed machining.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.248-253
• /
• 1997

The ideal surface roughness is obtained by tool geometry and feed rate in face milling. however actual surface roughness is affected by various factors such as cutting conditions. vibration and used tool. To improve the quality and productivity of the machining parts, lots of research on the evaluation of tool life and control of surface roughness has been required. Therefore, the width of flank wear, cutting force, and surface roughness are monitored to analyse the characteristics of surface roughness. This experimental investigation is mainly focused on the characteristics of surface roughness in multi-insert milling using TiN coated tool.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.8-12
• /
• 2012

Recently, a wide range of industrial production area has a competitive advantage through cost reduction. Moreover with the development of industrial technology, base material and cutting tool help the machining technology. But most of the machining enterprises have not hold the R&D facilities and human resources. This mainly disturbs the industrial development and th increase of production efficiency. Especially in the interrupted machining process, it showed different behavior with continuous machining process. So it needs to research and develop the tool life and tool wear mechanism analysis.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.30-35
• /
• 2001

Nickel-based heat resisting alloys are commonly used for high temperature application such as in aircraft engines and gas turbines. In this paper, the machinability of Nickel-based heat resisting alloys was investigated with respect to the wear and the chip formation by tool type and cutting condition. Relationship between three types of tool and chip formation was experimentally investigated. Among the three types of tool tested, coated tools(CVD, PVD) ara available for the difficult-to-cut-materials such as Nickel-based heat resisting alloys and etc.

• 한국생산제조학회지
• /
• 제5권3호
• /
• pp.73-79
• /
• 1996

In this paper present a new technique (strain-telemetering)for detection of coated tool failure in face milling processes. In the cutter body the strain signals received fro the transmitter is transformed in to frequency modulation(FM) signals in face milling processes. A receiver which is place near by the Vertical milling machine receives the FM signals, then the signals will be sent to a computer which determines whether th tool is failure. And machined surface of workpiece is detected by the SEM. In this paper, A on-line monitoring of the tool failure detection system based on the strain -telemetering apparatus has bee represented.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.81-86
• /
• 2004

Generally, automotive cylinder head is manufactured by FCD45 material that is hard to cutting materials, and it needs the accurate machining tool fir higher output of engine. This paper is concerned with a study on TiN coated 6 edges reamer for improving machining accuracy of cylinder head guide pin. The reamer shape is changed from 4 edges to 6 edges for the improvement of machining accuracy. Also, TiN coating is applied to the improvement of surface roughness of cylinder head guide pin and tool life of 6 edges reamer. It is noted that 6 edges reamer are effective in controlling the dimensional accuracy and surface roughness as well as increasing tool life.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.100-105
• /
• 1996

In this paper presents a new technique (stain-telemetering) for detection of coated tool failure in face milling processes. In the cutter body, the strain signals received from the transmitter are transformed into frequency modulation(FM) signals in face milling processes. The receive which is placed near by the Vertical milling machine receives the FM signals, then the signals are sent to a computer, which shows the tool failure. In this paper, A on-line monitoring of the tool failure detection system based on the strain-telemetering apparatus has been represented.