• 한국환경생태학회지
• /
• 제32권6호
• /
• pp.591-602
• /
• 2018

기수갈고둥(Clithon retropictus)은 염분농도, 물흐름, 지반조건 등 환경의 질을 판단할 수 있는 생물학적 지표종으로서의 가치가 높아 멸종위기야생생물 2급으로 지정되었으나 생리생태적인 특성에 대한 기초 연구는 여전히 부족한 실정이다. 이에 본 연구는 연초천 기수역을 대상으로 염분농도, 하상 토양입도 등의 환경조건이 개체크기, 밀도 등에 미치는 영향을 파악하고자 하였다. 기수역에서 생물의 분포에 영향을 미치는 핵심 변수인 염분농도를 조사한 결과 민물에서부터 기수에 해당하는 0~25‰ 범위를 나타내었다. 하상 입도는 연초보와 가까울수록 거친 자갈이 많아진 반면, 하류로 갈수록 모래보다 작은 입자의 비율이 증가했다. 개체수와 개체크기는 연초보를 중심으로 물이 정체되는 담수인 상류와 해수가 만나는 하류에서 급격히 감소한 것으로 미루어 염분농도에 대한 내성은 넓은 것으로 확인되었다. 하지만 양극단으로 갈수록 개체수와 개체크기가 줄어드는 것으로 나타나 적응성은 약해지는 것으로 분석되었다. 개체수 및 개체크기와 환경요인과의 상관관계를 분석한 결과, 염분농도와 하상입도 모두에 영향을 받는 것으로 나타났다. 염분농도와는 높을수록, 하상입도와는 모래보다 작은 입자가 많을수록 개체수는 감소하는 경향이었다. 개체크기와의 관계에서도 염분농도가 높은 하류로 갈수록 크기는 줄어들었다. 하상입도는 입자크기 19mm 이상인 자갈이 많아질수록 개체가 커지는 것으로 분석되었다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.295-296
• /
• 2003

최근 환경오염에 대한 인식과 규제가 증가하고 쾌적한 주변환경에 대한 관심이 높아짐에 따라 대기, 물, 토양, 생물 등과 같은 여러가지 환경시료의 분석을 통하여 오염의 정도를 파악하고 오염원을 규명하여 환경관리정책에 반영하려는 노력이 추진되고 있다. 여러 가지 환경시료중 대기분진은 자연적 또는 인위적 발생원에 따라 다양한 원소들을 함유하고 있기 때문에 대기환경지표시료로 이용되고 있다. 오염원의 규명을 위한 소량의 휠터상 분진시료로부터 원소의 정확한 분석은 필수적이고 중요한 선행작업이며 적합한 측정분석법의 이용이 요구된다. (중략)

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.11-20
• /
• 2014

This research examined the effect of the quality of aggregate on concrete workability and compressive strength through an investigation into regional aggregate used in domestic ready mixed concrete plants. Through the research, it was found that aggregate for ready mixed concrete shows poor quality overall. The main factor of deterioration in the quality of the concrete is the particle size of fine aggregate and fine particle content in coarse aggregate. The quality of aggregate significantly influences concrete's workability, which is defined based on 0.08mm passage related with powder and absorption. In addition, poor aggregate quality leads to increased water content in concrete to secure workability, which is related with a decline in the compressive strength and durability of concrete.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.305-307
• /
• 2003

우리가 숨쉬고 있는 대기 중에는 많은 부유 먼지가 존재하고 있으며, 이는 산업활동의 증가와 도시화, 차량 수 등의 증가로 인하여 그 종류와 농도가 크게 변화하여 자연 생태계 및 인체 건강에 심각한 영향과 피해를 유발시키고 있다(1989; 1996). 이러한 부유 먼지는 거대먼지(coarse particle)와 미세먼지(fine particle)로 분류할 수 있다. 미세먼지에는 여러 가지 금속성분, 유기물질,virus, 조류 및 곰팡이 등이 포함되어 있으며, 다환 방향 족 탄화수소(polycyclic aromatic hydrocarbon, PAH) 등의 발암성 물질이 포함되어 있다. (중략)

• Nuclear Engineering and Technology
• /
• 제29권2호
• /
• pp.99-109
• /
• 1997

A dynamic model for hydrogen generation by Fuel-Coolant Interactions(FCI) is developed with separate models for each FCI stage, coarse mixing and stratification. The model includes the physical concept of FCI, semi-empirical heat and mass transfer correlation and the concentration diffusion equation with the general non-zero boundary condition. The calculated amount of hydrogen, which is mainly generated in stratification, is compared with the FITS experiments. The model developed in this study shows a good agreement within a range of 10 % fuel oxidation rate and predicts the controlled mechanism of the chemical reaction very well. And this model predicts more accurately than the previous works. It is shown from the sensitivity study that the higher initial temperature of fuel particle is, the larger the reaction rate is. Up to 2700 K of temperature of the particle, the reaction rate increases rapid, which can lead to metal ignition.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.226-231
• /
• 2003

A coupling system of MM5 and POM using Stampi with different kinds of parallel computer is proposed and comparative numerical simulations of mesoscale wind induced by topography around East Sea/Sea of Japan are carried out. The results are as follows： 1) Strong horizontal conversion is induced by high mountain Pekdoo at its leeside. 2) The conversion winds at lee of high mountain are not clear in monthly and yearly mean NCEP-reanalysis because of coarse resolution of 1.86 degree by 1.86 degree. But Wind conversion is well simulated at atmosphere and ocean coupling system. And the conversion area of lee side of mountain is also agreed well with observed data of NSCAT launched in satellite ADEOS. 3) The surface ocean current is well correspondent with wind direction, induced by high mountains. And small different wind field information lead the different of particle distribution in numerical experiments of particle distribution on ocean surface.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.213-219
• /
• 2006

A Monte Carlo simulation based on Potts model in a three dimensional lattice was studied to analyze and design microstructures in porous sintered compacts such as porosity, pore size, grain (particle) size and contiguity of grains. The effect of surface energy of particles and the content of additional fine particles to coarse particles on microstructure development were examined to obtain fundamentals for material design in porous materials. It has been found that the larger surface energy enhances sintering (necking) of particles and increases contiguity and surface energy does not change pore size and grain size. The addition of fine particles also enhances sintering of particles and increases contiguity, but it has an effect on increment of pore size and grain size. Such a simulation technique can give us important information or wisdom for design of porous materials, e.g., material system with high surface energy and fine particle audition are available for higher strength and larger porosity in porous sintered compacts with applications in an automobile.

• 약학회지
• /
• 제27권3호
• /
• pp.229-234
• /
• 1983

In the manufacture of precipitated sulfur calcium pentasulfide ($CaS_{5}$, train product) and calcium thiosulfate ($CaS_{2}O_{3}$, by-product) are decomposed simultaneously by hydrochloricacid into coarse (not being uniform) particle-size products. To improve this drawback, calcium thiosulfate was prepared directly without making calcium pentasulfide and obtained $S_{6}$ by the acid-decomposition. In the conversion of hexatomic sulfur to octatomic sulfur, the polymerization and the depolymerization were observed by using purification method. The conversion of $S_{6}$ to $S_{8}$ is proceeded by two steps. The first step reaction is affected by impurities (especially $SO_{2}$ and $H_{2}S$), Hexatomic sulfur is inert to triethylamine for the time being by purification, and thereafter a slow conversion to polymeric and then to octatomic sulfur occurs. Instead of calcium pentasulfide, the acid decomposition of calcium thiosulfate has several advantages; uniformity of particle-size of product, increase of yield, and simplicity of procedure.

• 한국대기환경학회지
• /
• 제9권2호
• /
• pp.125-131
• /
• 1993

Electrostatic Precipitator has been widely used to get high efficiency which is required for collection of fine particles. In order to provide collection efficiency and size distribution data for a pilot electrostatic precipitator, a pilot study has been conducted on fly ash from pulverized coal burning apparatus. The aims of this study are to investigate characteristics of electric charge, to measure collection efficiency varied with the applied voltage, to get an optimum current and current density. Optimum current density was obtained to 0.7mA/$cm^2$ at the average electric field strength 2.33kV/cm in this experiment. Maximum particle collection efficiency was indicated 99.21% at the applied voltage 7kV. Finally, particle size distribution is also compared with photographic results. Both coarse and fine particles at the range of 0.5$\sim$2$\mu$m and 3$\sim$10 SEM $\mu$m were clearly removed by increasing applied voltage.

• 한국안전학회지
• /
• 제13권3호
• /
• pp.112-118
• /
• 1998

This work has been carried out to study the mixing characteristics of solid in vibrating feeder for stable operations of fluidized bed combustion. The system consisted of two particles such that fine particles were located on the top of the coarse particles before vibratory mixing had started. Effect of particle size, particle densities, vibration amplitude and vibration frequency were experimentally obtained. Also, a diffusion model was applied in interpreting the experimental results. From these results, the following empirical equation for the diffusivity was obtained. $0.87{(\frac{d_c}{d_f})}^{0.73}\;{(\frac{\rho_f}{\rho_c})}^{0.53}(A^2f)$.