• Journal of Korean Biological Nursing Science
• /
• v.16 no.1
• /
• pp.41-51
• /
• 2014

Purpose: The purpose of this study was to identify clinical nurses' knowledge of pharmacology, their need on pharmacology education contents, and perceived connectivity between knowledge and clinical practice. Methods: Subjects consisted of 114 clinical nurses. They responded to self-administered questionnaires about knowledge of pharmacology and need in pharmacology, and perceived connectivity between the knowledge and clinical practice. Results: The mean score of knowledge of pharmacology was $5.2{\pm}1.7$. The mean score of need on pharmacology in clinical practice was $7.9{\pm}1.9$, and those of satisfaction, application, and confidence with clinical performance by applying the knowledge to clinical practice were $7.4{\pm}1.9$, $6.8{\pm}2.0$, and $7.5{\pm}2.1$ respectively. Knowledge of pharmacology was positively correlated with perceived connectivity between knowledge and clinical practice. Scores of need of dose calculations was the highest among 14 units of pharmacology education contents in undergraduate courses while that of development of new drugs was the lowest. Scores of need of coagulation modifier drugs and thrombolytic agents were the highest among 16 units of pharmacology education contents by system specific drug while those of dermatologic and ophthalmic drugs were the lowest. Conclusion: The results indicate that knowledge of pharmacology is important in promoting perceived connectivity with clinical practice by applying knowledge to clinical practice.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.125-133
• /
• 2016

In this study, efforts were made to enhance the mechanical properties of the poly(vinyl alcohol) (PVA) fibers of medium molecular weight(number-average degree of polymerization=1735) varying the ratio in $DMSO/H_2O$ mixed solvent and spinning/drawing conditions. The gel fibers prepared from pure DMSO were opaquely frozen in the coagulating bath of $-20^{\circ}C$. However, transparent gel fibers were formed without freezing for the mixture to contain water less than 80wt%. As the amount of water in the mixture increased the residual solvent in the coagulated gel fibers decreased ranging from 85 to 42wt%. The complex viscosity increased with increasing PVA concentration in 80/20 $DMSO/H_2O$ exhibiting remarkable shear thinning at 18wt%. In the Cole-Cole plot, the 18wt% PVA solutions gave a deviated curve from 12 and 15wt% ones. Thus the optimum PVA concentration for the spinning processing of medium MW PVA solutions in 80/20 $DMSO/H_2O$ was determined to 18wt% with rheological concept. Low degree of drawing during hot drawing process in the dry state was available for high bath draft in the coagulation bath. The most improved mechanical properties were observed by applying the highest possible draw ratio attained by reducing bath draft over multi-step drawing process. In the given bath draft, linear relationship was observed between both tensile strength and modulus and draw ratio showing the inflection points at the draw ratio of 19.5 and 18.0 for tensile strength and modulus, respectively.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.128-132
• /
• 2009

Fucoidan, a sulfated polysaccharide derived from brown seaweed, is an important material valued for its various biological functions, including anti-coagulation, anti-aging, and immune system support. In this study, we examined the potential of fucoidan as a novel emulsifying agent in BSA (bovine serum albumin)-stabilized emulsion at a neutral pH. We measured the dispersed oil-droplet size, surface zeta-potential and creaming formation of 0.5 wt% BSA emulsion (20 wt% oil traction) in the absence and presence of fucoidan. The average particle size and zeta-potential value were 625.4 nm and -30.91 mV in only BSA-stabilized emulsion and 745.2 nm and -44.2 mV in 1.0 wt% fucoidan-added BSA emulsion, respectively. This result suggested that some positive charges of the BSA molecules interacted with the negative charges of fucoidan to inhibit the flocculation among the oil droplets. The creaming rate calculated from the backscattering data measured by Turbiscan dramatically decreased in 1.0 wt% fucoidan-added BSA emulsion during storage. Accordingly, the repulsion forces induced among the oil particles coated with 1.0 wt% fucoidan in emulsion solution resulted in significantly increased emulsion stability. The turbidity of the BSA-stabilized emulsion at 500 nm decreased during five days of storage. However, the fucoidan-added BSA emulsion exhibited a higher value of turbidity than the BSA-stabilized emulsion did. In conclusion, an anionic sulfated fucoidan lowered the surface zeta-potential of BSA-coated oil droplets via the electrostatic interaction, and subsequently inhibited the flocculation among the oil droplets, thereby clearly minimizing the creaming and phase separation of the emulsion.

• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.39-47
• /
• 2018

Styrene-butadiene rubber (SBR) is widely used in tire treads due to its excellent abrasion resistance, braking performance, and reasonable cost. Depending on the polymerization method, SBR is classified into solution-polymerized SBR (SSBR) and emulsion-polymerized SBR (ESBR). ESBR is less expensive and environmentally friendlier than SSBR because it uses water as a solvent. A higher molecular weight is also easier to obtain in ESBR, which has advantages in mechanical properties and tire performance. In ESBR polymerization, a surfactant is added to create an emulsion system with a hydrophobic monomer in the water phase. However, some amount of surfactant remains in the ESBR during coagulation, making the polymer chains in micelles clump together. As a result, it is well-known that residual surfactant adversely affects the physical properties of silica-filled ESBR compounds. However, researches about the effect of residual surfactant on the physical properties of ESBR are lacking. Therefore, in this study we compared the effects of remaining surfactant in ESBR on the mechanical properties of silica-filled and carbon black-filled compounds. The crosslinking density and filler-rubber interaction are also analyzed by using the Flory-Rehner theory and Kraus equation. In addition, the effects of surfactant on the mechanical properties and crosslinking density are compared with the effects of TDAE oil (a conventional processing aid).

• Membrane Journal
• /
• v.17 no.4
• /
• pp.359-368
• /
• 2007

The copolymer membranes, poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) were prepared by phase inversion method using as an additive with N,N-dimethylformamid as a solvent. The pores are generated during the solvent and non-solvent exchange process in the coagulation bath filled with non-solvent (distilled water). The highest porosity of the membrane was 60%. The surface and cross-section of the membranes was observed with a scanning electron microscopy (SEM). The mechanical property of the membrane was determined by using an universal testing machine (UTM). Tensile strength of measured membranes is presented the maximum 6.57 MPa at 30 wt% of PVdF-HFP.

• Journal of the Korean Chemical Society
• /
• v.47 no.2
• /
• pp.127-132
• /
• 2003

We have developed a direct polymerase chain reaction (PCR) and electrophoresis method for the diagnosis of bovine theileriosis from whole blood DNA analysis without DNA extraction. The technique empolyed a FoLT (formamide, low temp.) technique and was utilized in the diagnosis of bovine theileriosis. Formamide solubilize the blood cells, and the lowered incubation temperatures reduced protein coagulation. 100-200 nL of whole blood and PCR reagents were introduced directly into a PCR tube. After the amplification, the PCR product (816-bp DNA) was introduced into the electrophoresis system. The results of this analysis were consist with those obtained using purified DNA.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.6
• /
• pp.1046-1056
• /
• 2016

RV-23 is a melittin-related antibacterial peptide (MRP) with lower cytotoxicity than either melittin or AR-23, another MRP. The aim of this study was to explore the mechanism of RV-23's antibacterial selectivity and its hemocompatibility. The results showed that all the peptides exhibited lytic activity against Staphylococcus aureus and Escherichia coli, with RV-23 showing the highest potency. Moreover, RV-23 had lower cytotoxicity than melittin or AR-23 at their minimal inhibitory concentration. In addition, CD experiments showed that melittin, RV-23, and AR-23 all had a typical α-helical structure, and RV-23 had the lowest α-helix content. The structural information showed that RV-23 has the lowest hydrophobicity and highest hydrophobic moment. Because hydrophobicity and α-helix content are believed to correlate with hemolysis, the results indicate that the selective lytic activity against bacteria of RV-23 may be due to its low hydrophobicity and α-helicity, which lead to low cytotoxicity without affecting antibacterial activity. Furthermore, RV-23 did not affect the structure and function of blood components such as red blood cells, platelets, albumin, and the blood coagulation system. In conclusion, RV-23 is a cell-selective antibacterial peptide with high hemocompatibility due to its unique structure.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.342-349
• /
• 2000

Hollow fiber membranes were prepared via thermally-induced phase separation process followed by stretching process from isotactic polypropylene and soybean oil system. Various operating parameters were examined in terms of their effects on the structure variation and performances of the membrane, and were optimized. Melt viscosity of the melt sample had influence on the formation of the microfibrils, and addition of nucleating agent increased the nucleation density to enhance the interspherulitic pore formation by stretching. Annealing the membrane at its stretched state relaxed the stress induced by stretching and helped the membrane maintain the stretched structure without shrinking. Solid-liquid Phase separation is more prevalent when the nucleating agent was added, and coagulation bath temperature determined the nucleation density, which affected the pore formation by stretching. In the absence of nucleating agent, nucleation was not effective and liquid-liquid phase separation governed the structure formation, which showed the opposite trend to that of the case with nucleating agent.

• Journal of Pharmacopuncture
• /
• v.22 no.3
• /
• pp.140-146
• /
• 2019

Objectives: Venomous fishes have different pharmacological effects and are useful. Among the venomous fish, stonefishes; especially Pseudosynanceia melanostigma has various pharmacological effects on the nervous, muscular and cardiovascular system of humans. In this study, toxicological characteristics, some blood effects, pharmacological and enzymatic properties of Pseudosynanceia melanostigma venom was investigated. Methods: Crude venom purified by using gel filtration chromatography and the molecular weights of the venom and its fractions were estimated. The approximate LD values of this venom were determinedand the effects of LD50 dose on the blood of rabbits were studied. Hemolytic and Hemorrhagic activity of the venom sample was determined. In this case coagulation tests were performed. Results: The LD50 of the Pseudosynanceia melanostigma crude venom was also determined to be $194.54{\mu}g/mouse$. The effect of two doses of LD50 showed a non-significant differences decrease in RBCs and MCV. In other cases, the results showed significant differences in WBC, Plt, Hb, MCH, MCHC and HCT; also it's showed a significant decrease. WBC count showed a significant increase with two doses of LD50 groups. The prothrombin time and partial prothrombin time were increased after venom treatment. As well as bleeding and clotting time were increased. According to the results, a minimum dose for Haemorrhagic effect $40{\mu}g$ was obtained. Conclusion: Venom of Pseudosynanceia melanostigma has inhibitory effect on platelet aggregation that can be used to design and develop of anticoagulant drugs.

• The Korean Journal of Physiology and Pharmacology
• /
• v.25 no.5
• /
• pp.385-393
• /
• 2021

Tissue factor (TF) activates the coagulation system and has an important role in the pathogenesis of various diseases. Our previous study stated that retinoid receptors (RAR-α and RXR-α) are released as a lipid droplet in monocrotaline/lipopolysaccharide-induced idiosyncratic liver toxicity in mice. Herein, the interdependence between the release of retinoid receptors RAR-α and RXR-α and TF in N-acetyl-p-aminophenol (APAP)-induced mice liver toxicity, is investigated. Serum alanine transaminase (ALT) level, platelet and white blood cells (WBCs) counts, protein expression of fibrin, TF, cyclin D1 and cleaved caspase-3 in liver tissues are analyzed. In addition, histopathological evaluation and survival study are also performed. The results indicate that using of TF-antisense (TF-AS) deoxyoligonucleotide (ODN) injection (6 mg/kg), to block TF protein synthesis, significantly restores the elevated level of ALT and WBCs and corrects thrombocytopenia in mice injected with APAP. TF-AS prevents the peri-central overexpression of liver TF, fibrin, cyclin D1 and cleaved caspase-3. The release of RXR-α and RAR-α droplets, in APAP treated sections, is inhibited upon treatment with TF-AS. In conclusion, the above findings designate that the released RXR-α and RAR-α in APAP liver toxicity is TF dependent. Additionally, the enhancement of cyclin D1 to caspase-3-dependent apoptosis can be prevented by blocking of TF protein synthesis.