• Asian-Australasian Journal of Animal Sciences
• /
• 제16권5호
• /
• pp.738-742
• /
• 2003

The monitoring was carried out for one year on 20 farms of Mediterranean buffalo situated in central Italy. The milk yield, the somatic cell count, the coagulating properties and some components were determined. The average value of somatic cells was $21.28n{\times}10^3/ml$. Milk production decreased when somatic cell numbers increased. The rennet clotting time increased significantly when somatic cells were higher than $300.00n{\times}10^3/ml$, the curd firming time was significantly higher when somatic cells were more than $1,000.00n{\times}10^3/ml$ and the curd firmness increased up to $200.00n{\times}10^3$/ml, then gradually decreased. Protein and casein decreased when somatic cells increased and the same trend was shown by casein/protein ratio. Both for these components and the coagulating properties the threshold limit of somatic cells to obtain better results was $200.00n{\times}10^3/ml$. The somatic cell number did not show a trend which was strictly influenced by the lactation stage, contrary to what happened in the other species.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권8호
• /
• pp.1212-1217
• /
• 2003

Fifty-two Holstein cows with different phenotypes of $\kappa$-casein ($\kappa$-CN) and $\beta$-lactoglobulin ($\beta$-LG) were selected to provide weekly milk samples for heating at 30, 70, 75 and $80^{\circ}C$ for 2 min. Coagulating properties of heated milk samples measured as rennet clotting time, rate of curd firming and curd firmness at cutting were determined by a Formagraph. Milk samples were analysed for fat and casein. Least squares analyses of data, after adjustments were made for effect of milk casein and fat contents, indicated that although an increase in heating temperatures resulted in less desirable coagulating properties, the effect of milk types was inherent irrespective of heating temperatures. The shortest rennet clotting time (6.06 min), fastest rate of curd firming (5.61 min) and firmest curd (38.05 mm) were obtained from milk with the B variant for $\kappa$-CN and B variant for $\beta$ -LG when preheated at $30^{\circ}C$. It appears that milk bearing $\kappa$-CN B is more resistant to heat perturbation. All milk samples having the $\kappa$-casein AA (milk types AA/AA, AA/AB, AA/BB) did not have a measurable K20 value when preheated at $70^{\circ}C$. This effect was observed for $\kappa$-casein AB (milk types AB/AA, AB/AB, AB/BB) at $75^{\circ}C$ and $\kappa$-casein BB (milk types BB/AA, BB/AB, BB/BB) at $80^{\circ}C$.

• Geomechanics and Engineering
• /
• 제17권5호
• /
• pp.453-464
• /
• 2019

Soft marine soil has high fine-grained soil content and in-situ water content. Thus, it has low shear strength and bearing capacity and is susceptible to a large settlement, which leads to difficulties with coastal infrastructure construction. Therefore, strength improvement and settlement control are essential considerations for construction on soft marine soil deposits. Biopolymers show their potential for improving soil stability, which can reduce the environmental drawbacks of conventional soil treatment. This study used two biopolymers, an anionic xanthan gum biopolymer and a cationic ${\varepsilon}-polylysine$ biopolymer, as representatives to enhance the geotechnical engineering properties of soft marine soil. Effects of the biopolymers on marine soil were analyzed through a series of experiments considering the Atterberg limits, shear strength at a constant water content, compressive strength in a dry condition, laboratory consolidation, and sedimentation. Xanthan gum treatment affects the Atterberg limits, shear strength, and compressive strength by interparticle bonding and the formation of a viscous hydrogel. However, xanthan gum delays the consolidation procedure and increases the compressibility of soils. While ${\varepsilon}-polylysine$ treatment does not affect compressive strength, it shows potential for coagulating soil particles in a suspension state. ${\varepsilon}-Polylysine$ forms bridges between soil particles, showing an increase in settling velocity and final sediment density. The results of this study show various potential applications of biopolymers. Xanthan gum biopolymer was identified as a soil strengthening material, while ${\varepsilon}-polylysine$ biopolymer can be applied as a soil-coagulating material.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권10호
• /
• pp.1319-1324
• /
• 2010

The objectives of this study were to compare the effectiveness of different indicators of mammary inflammation in buffalo and to evaluate the association of the indicators with buffalo milk yield, composition, and rennet coagulation properties. This study was carried out at four buffalo farms in central Italy using a total of 50 lactating buffalo. Milk from each buffalo was tested at the beginning, middle, and end of lactation. To evaluate the relationship between mastitis markers and milk components, three classes were defined for each of the following markers: total somatic cell count (TSCC), differential somatic cell count (DSCC), and bacteriological results The regression coefficient for the reference method and the alternative method of determining TSCC was 0.81, indicating that the method routinely used to analyze buffalo milk consistently underestimated actual TSCC. The milk samples positive for udder-specific bacteria also had higher TSCC values than the samples that were negative for bacteria ($872{\times}10^3$/ml vs. $191{\times}10^3$/ml). In samples that were positive for udder-specific bacteria, polymorphonuclear leukocytes (PMN) made up greater than 50% of the cells. Moreover, only 1% of the samples in the lowest TSCC class were positive for bacteria. The correlation between TSCC and PMN was stronger (0.70), and PMN values in buffalo milk increased significantly when the TSCC class changed from low (38%) to medium and high (56% and 64%). Milk yield was negatively related to TSCC. Significant changes in lactose (4.87%, 4.80% and 4.64%) and chloride content (0.650 mg/ml, 0.862 mg/ml and 0.882 mg/ml) were also observed with increasing TSCC values. Higher TSCC was associated with impaired rennet coagulation properties: the clotting time increased, while the curd firming time ($p{\leq}0.05$) and firmness decreased. We concluded that in buffalo as in dairy cows, TSCC is a valid indicator of udder inflammation; we also confirmed that a value of $ 200{\times}10^3 cells/ml should be used as the threshold value for early identification of an animal affected by subclinical mastitis. In addition to its association with significantly decreased milk yield, a TSCC value above this threshold value was associated with changes in milk composition and coagulating properties.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.163-172
• /
• 2003

본 연구는 최근 개발된 합성실리카 그라우트재의 공학적 특성을 규명한 것으로서 연구에 사용된 그라우트재는 보통포틀랜드시멘트를 주로 사용하였으며, 응결재인 합성실리카, 실리카졸, 규산나트륨 3호에 대한 특성을 분석하였다. 공학적 특성을 파악하기 위하여 육안관측, SEM촬영, 일축압축강도시험과 현장적용성 시험 등을 실시하였다. 이상과 같은 일련의 시험들에 의한 결과, 일반적인 규산나트륨 3호의 겔보다 합성실리카의 겔이 단시간(6～24시간)내에 일축압축강도가 3～6배정도의 고강도로 나타났다. 특히 JS-CGM Grouting에 의한 현장적용성 평가에 있어서 합성실리카 그라우트재는 차수공법용 주입재로써 상당한 투수계수 저감효과가 있음을 확인하였다.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.97-104
• /
• 2019

Emulsion styrene-butadiene rubber silica wet masterbatch (ESBR silica WMB) technology was studied to develop highly filled and highly dispersed silica compounds, involving the preparation of a composite by co-coagulating the modified silica and the rubber latex in a liquid phase. Previous studies have shown that when manufacturing ESBR silica WMB/Butadiene silica dry masterbatch (BR silica DMB) blend compounds, preparing BR silica dry masterbatch and mixing it with ESBR silica WMB gave excellent results. However, WMB still has the problem of lower crosslink density due to residual surfactants. Therefore, in this study, tetrabenzylthiuram disulfide (TBzTD) was added instead of diphenyl guanidine (DPG) in the ESBR silica WMB/BR silica DMB blend compounds and sulfur/CBS contents were increased to evaluate their cure characteristics, crosslink densities, mechanical properties, and dynamic viscoelastic properties. TBzTD was found to be more effective in increasing the crosslink density and to produce superior properties compared to DPG. In addition, with increasing sulfur/CBS contents, mechanical properties and rolling resistance were enhanced due to high crosslink density, but the abrasion resistance was not significantly changed because of the toughness.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.37-40
• /
• 2001

This study was carried out to investigate the optimum condition for silk sericin collection from degumming solution using some aluminium salts with various treatment conditions and examine the thermal properties of silk sericin collected from degumming solution. Silk sericin was precipitated by treatment of aluminium metal compound from degumming solution. The best optimum collecting conditions of silk sericin from degumming solution are the concentration of 2 $m\ell$/l of polyaluminium chloride (PAC), pH range of 5~7 and room temperature. The reduction of water pollution was evaluated by decreasing the chemical oxygen demand (COD) and nitrate ion (NO$_3$￣). Thermal stability of silk sericin collected from degumming solution was a little lower than that of hot water.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 추계 총회 및 학술발표회
• /
• pp.5-9
• /
• 1995

In the dry-jet-wet-spinning process of a hollow fiber membrane, the polymer solution is pumped into a coaxial tube, jet spinneret. The threadline emerging from the spinneret is stabilized by an internal coagulating medium(liquid or gas) as it emerges from the jet orifice. The nascent hollow thread is further stabilized in a quench bath as shown in Fig. 1. In this scheme, three mechanism of formatiota(temperature gradient, solvent evaporation, and solvent-nonsotvent exchange) can be combined. The changes which promote stabilization often play a dominant role in determining the ultimate fiber wall structure as well. Hence, in pratice, hollow fiber stabilization and development of membrane structure are commonly inseparable. However, fiber dimension(the inside diameter and wall thickness of the hollow fiber) is mainly a rheological problem and is determined by dope pumping rate, spinneret diatance from the coagulation bath, inner coagulant flow rate, and fiber draw-rate. Besides rheological phenomena play a prominent part in the final properties of the hollow fiber.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.44-52
• /
• 2000

The dispersion of surface oil is generally described as a break-up of oil slick into small oil droplets. These small droplets are subjected to turbulence and vertical circulation so that it can be entrained into subsurface. Sometimes they tend to be submerged into sea bottom permanently. The diameter of oil droplets is a critical parameter to determine their behavioral characteristics under water surface. At the same time the variations of droplet stability depends on the weathering of it. That is why the weathered oil has different mechanism from the unweathered one. The variability of physical properties of oil including viscosity and density contribute to interfere with effective separation of oil and emulsion droplets in water. Also in the presence of interactions among the droplets there are coalescing or coagulating effects on the dispersion process of droplets.

• 한국식품과학회지
• /
• 제10권2호
• /
• pp.143-150
• /
• 1978

저자들은 전보(Korean J. Food Sci. Techno., 9,123(1997)에서 분리 대두 단백의 식품학적 성질을 조사하였다. 본 연구에서는 이 성질을 응용하여 대두 단백섬유를 제조하고저 분실 험실에서 고안 설계하여 의뢰제작한 protein spinning apparatus를 사용하여 분리 대두단백으로 대두단백섬유 제조실험을 행한결과 texture가 우수한 제품을 얻었다. 제조조건은 15-18% 단백질용액을 알카리 (0.6%)로 처리하여 50-100 PSI spinning press로 사출한 후 12% Nacl-1 N acetic acid bath에서 응고시켰다. 12% 단백질 용액은 생성된 단백섬유의 texture가 불량하여 일정한 모형을 유지하지 못하였다. 제품의 성질을 Instron기기와 texturometer를 사용하여 측정하였다. 아울러 대두 단백섬유의 형성기작을 제시하였다.