• Journal of the Ergonomics Society of Korea
• /
• v.12 no.2
• /
• pp.3-13
• /
• 1993

A psychophysical measurement technique called "magnitude estimation" was used to evaluate several interior design alternatives for a high speed train. Pas- senger activity, seat direction, and passenger age were manipulated by using a three factor within-subjects experimental design. During the experiment, two dependent measures, a line length and a numerical estimate for each alternative design were collected to validate the experimental procedures. The results showed that pasnger seats arranged in the same direction as the running direction of the train was favored nine times more than the opposite. Also, the subjects preferred listening to music in a coach train to the other activities such as reading newspaper, watching a movie, and resting. This paper demonstrates that a psychophysical technique can be sued in the design of a development process, especially when it is difficult to quantify design variables such as subjective opinion or preference, etc.

• Journal of the Ergonomics Society of Korea
• /
• v.12 no.2
• /
• pp.15-28
• /
• 1993

Proper ergonomic design of a passenger seat for the highspeed train is one of the essential design components that is directly related to passenger comfort. This study investigated a systematic approach to the ergonomic passenger seat design and evaluation for the Korean highspeed train. To design an ergonomic passenger seat that improves passenger confort, Korean anthropometric data, pas- senger activities in the coach, body postures, body contours and seat dimensions were considered. By analyzing the interredlationship of such factors, resultant seat dimensions were suggested. To properly ecaluate the suggested dimensions, four prototypes were subsequently made and iteratively tested in the laboratory. It is expected that this approach is readily applicable to the passenger seat design of other transport vehicles as well as a train.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.65-68
• /
• 2006

Experiments were performed to investigate the effects of mud-flap width on the aeroacoustic noise generation inside high-speed trains. The open-circuit type wind tunnel was used. The measurement setup was custom-built to simulate intercoach spacing. From the measurements, the characteristics of the turbulent flow after the intercoach spacing and consequent generation of aeroacoustic noise inside the cabin was investigated. Especially the effects of mud flap length on the characteristics of the characteristics of the turbulent flow were identified. The mechanism of noise generation by analyzed interactions with structure vibration characteristics and generation characteristics of blocked pressure was investigated.

• 대한공업교육학회지
• /
• v.30 no.1
• /
• pp.1-18
• /
• 2005

The purpose of this study was to development a model of problem solving instruction for improving practical skill-competence in technical high school. For the study, various literature researches were reviewed intensively about problem solving process, laboratory instruction's approaches and learning principals. The problem solving instruction process was composed with identifying problems, generating alternative solutions, investigation and research, choosing a solution, acting on a plan, modeling of problem solving, testing and evaluating, redesigning and improving. The skills schema combines a four domain of skilled activity, that is, cognitive skills, psychomotor skills, reactive skills and interactive skills. The problem solving instruction was composed with five major learning systems-emotional, social, cognitive, physical, and reflective-that can be used extensively as generic lesson plashing. The teacher serves as a coach or guide for student learning. As a facilitator, the teacher challenges, questions, and stimulates the students in their thinking, problem solving and self-directed study. In this process, students represent problem with think aloud, assume responsibility for their learning and move from teacher-centered to student-centered education.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2649-2651
• /
• 2005

In trains driven by electric motor, when the adhesion force between rail and driving wheel decreases suddenly, the electric motor coach has slip phenomena. The characteristics of adhesion force coefficient are strongly affected by the conditions between rails and driving wheels, such as moisture, dust, and oil on the rails and so on. This paper proposes the vector control structure for the improved re-adhesion control with paralleled control of induction motors under the sudden variation of the adhesion force.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1879-1880
• /
• 2006

In electric motor coaches, when the adhesion force between rail and driving wheel decreases suddenly, the electric motor coach has slip phenomena. The characteristics of adhesion force coefficient is strongly affected by the conditions between rails and driving wheels, such as moisture, dust, and oil on the rails and so on. This paper proposes the simulation system for slip & slide test using virtual train. We can easily research the adhesion characteristics and adhesion control method with this equipment under the sudden variation of the adhesion force coefficient.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.551-556
• /
• 2004

The Korean Train eXpress(KTX) which started in last April has got many complaints of passengers. This is caused by weak connections between KTX and traditional trains. This paper shows the methods to increase the connection in 3 points of view; business, operation and rolling stocks. For the flexible business, it is necessary that the connecting trains must be multi-purposefully for the satisfaction of KTX transferring passengers and existing commuting passengers. And the expanding of free class is needed. A free class is the base of business flexibility. In an operation point of view, I show the method that can decrease pains for getting transfer. Finally, for the effective using of rolling stocks, I propose that TC(trailer with control) car is added to existing locomotive and passenger coach set. In concluding, KTX needs strong connections with traditional trains. This will bring more competitive power with other transportation systems. And that method must get flexible and various service, in addition to effective and minimizing investment.

• Journal of the Korean Society for Railway
• /
• v.8 no.2
• /
• pp.111-115
• /
• 2005

The Study provides the technical background and calculation method f3r the long wave track defect. On high speed railway, It is necessary to manage the long wave band up to 80m track defect fur improving a riding quality. For this reason, Track recording methods for highspeed railway are used 10m and 30m recording bases, these are covered middle wave band and long wave band successfully. Extended base recording data is calculated by geometrical model and this data provides a good result for KTX riding index.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.257-262
• /
• 2005

Sleeping cars mean railroad cars which are equipped with facilities available business, travel, rest, sleep for long distance travel. Domestic sleeping cars , as the concept of ‘night train’, provide passenger who travel at night with simple berth . German, Japanese, American sleeping cars are classified with sleeping car, coach car, seat car or first class, standard class, family room, room for the handicapped, which offer not only sleep but various facilities and service such as snack, reading, available shower for daytime travel. Accordingly, through the analyzing spatial factor of domestic and foreign sleeping cars, we first should abstract the demand for fundamental design to enhance our passenger's comfort. And then we should try to improve the quality of travel culture by offering it passenger.

• International Journal of Railway
• /
• v.4 no.3
• /
• pp.74-79
• /
• 2011

Recent years have witnessed speed up of moving vehicles such as high-speed of trains. Increase in speed entails concomitant increase in turbulent air flow which contributes toward increased aerodynamic noise. The proposed method for aerodynamic noise reduction is based on a biomimetic design of owl feather. The five morphological parameters of the owl feather are extracted from close observation, and simulation cases are constructed by applying design of experiments methodology. Swirling strength for each case is obtained through steady-state CFD analysis, and key morphological parameters that affect the turbulence are identified. Large eddy simulations (LES) are then performed on selected cases to predict the air turbulence. Different cases show varying vortex distributions which are expected to lead to varying aerodynamic noise levels.