• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.353-362
• /
• 2019

Soil-rock mixture (S-RM) is an inhomogeneous geomaterial that is widely encountered in nature. The mechanical and physical properties of S-RM are important factors contributing towards different deformation characteristics and unstable modes of the talus slope. In this paper, the equivalent substitution method was employed for the preparation of S-RM test samples, and large-scale triaxial laboratory tests were conducted to investigate their mechanical parameters by varying the water content and confining pressure. Additionally, a simplified geological model based on the finite element method was established to compare the stability of talus slopes with different strength parameters and in different excavation and support processes. The results showed that the S-RM samples exhibit slight strain softening and strain hardening under low and high water content, respectively. The water content of S-RM also had an effect on decreasing strength parameters, with the decrease in magnitude of the cohesive force and internal friction angle being mainly influenced by the low and high water content, respectively. The stability of talus slope decreased with a decrease in the cohesion force and internal friction angle, thereby creating a new shallow slip surface. Since the excavation of toe of the slope for road construction can easily cause a landslide, anti-slide piles can be used to effectively improve the slope stability, especially for shallow excavations. But the efficacy of anti-slide piles gradually decreases with increasing water content. This paper can act as a reference for the selection of strength parameters of S-RM and provide an analysis of the instability of the talus slope.

• 한국식품과학회지
• /
• 제31권4호
• /
• pp.906-911
• /
• 1999

저선량으로 조사된 곡류의 방사선 조사 여부를 판별 하는데 DNA 'Comet Assay'의 활용이 가능한지를 검토하였다. 참깨, 들깨, 밀, 보리 및 쌀을 0, 0.1, 0.3, 0.5, 0.7, 1.0 kGy로 조사하여 시료로 사용하였다. 시료에 PBS 용액을 가하여 세포 현탁액을 조제하고 agarose gel과 혼합하여 microscope slide 상에서 lysis한 후 전기영동하여 염색한 다음 DNA 절편의 이동에 의해 형성된 ‘comet’의 tail length를 측정하여 분석하였다. 0.3 kGy 이상으로 조사한 모든 시료에서 tail length가 비조사한 시료와 차이를 나타내어 조사 여부를 확실히 판별할 수 있었다. 또한 비조사된 시료에서는 tail이 없거나 아주 짧은 tail을 가진 세포들이 관찰되었으며, 조사된 시료에서는 조사선량의 증가에 따라 DNA의 손상정도가 증가함으로서 tail length가 길어지는 것이 관찰되었다. 특히 참깨, 들깨 및 밀의 경우는 0.1 kGy의 낮은 조사선량에서도 현미경을 통하여 육안으로 비조사한 시료와의 구별이 가능하였다. 따라서 DNA 'Comet Assay'는 간단하고 신속하며 비교적 저렴하게 실시할 수 있는 곡류의 방사선 조사 여부를 판별하는 데 활용할 수 있음을 확인하였다.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6977-6984
• /
• 2015

품질 향상을 위해 연속적인 소성 변형을 이용한 롤 포밍 공정에 피어싱, 벤딩, 트리밍 등 별도의 가공공정을 통합한 볼 슬라이드 레일의 멀티 롤 포밍 공정의 필요성이 대두되고 있다. 하지만 프레스기의 진동 및 소음은 이 공정에서 생산되는 슬라이드 레일의 품질 저하를 유발한다. 본 연구에서는 롤 포밍 유한요소 프로그램으로 최적 변형률을 고려하여 롤을 설계하였다. 그리고 멀티 공정의 정적 안정성을 예측하기 위해 구조해석 프로그램으로 프레스기에 대한 응력 및 변형량을 계산하였다. 또한 공진영역에서의 장치들의 운전을 회피하기 위해 Modal 해석을 통해 1, 2차 모드에서의 고유진동수를 계산하였다. 그 결과 공정의 동적 안정성 개선을 확인하기 위해 마이크로폰과 가속도계를 이용하여 기존 및 연구 공정들의 소음, 진동의 크기를 비교하였다. 그리고 기존 및 연구 공정으로 생산되어진 레일의 폭 치수와 표면거칠기를 측정하였다. 따라서 해석 및 실험적 연구를 통해 멀티 롤 포밍 공정이 안정하다는 것을 알 수 있었다.

• Journal of Welding and Joining
• /
• 제25권1호
• /
• pp.30-36
• /
• 2007

A joining of dissimilar metal combination faces significant problems such as poor strength and cracking associated with brittle intermetallic compounds(IMC) formed. An application of laser allows low heat input; leading to less dilution and smaller heat affected zone. The $CO_2$ laser overlay was conducted on an AC2B alloy with feeding Fe-based powders. The overlay area was significantly influenced from the travel velocity rather than the powder feeding rate. The interface between the overlay and substrate consisted of the hard and brittle IMC($FeAl_3,\;Fe_3Al,\;Fe_2Al_5$), which initiating and propagating the crack. The reciprocating test for the slide wear was conducted on a multi-pass overlay experiment. Comparing with the multi-pass overlay with no overlap, the overlay with 50% overlap showed better wear resistance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.167-174
• /
• 1999

A Land slide in Granitic Gneiss weathered soil was stabilized successfully with soil nailing using 929mm steel bar. To understand the behavior of load transfer between soil and nail, in-situ pdl-out tests were carried out. The strains of steel bars were measured using strain gauges during pull-out tests. Forces-strain data from laboratory tension tests on steel bar and grouted steel bar were examined to compare with those of the pull-out tests. Comparisons were made between the pull-out test results and laboratory test result to understand load transfer mechanism.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.59-61
• /
• 2006

The $CO_2$ laser cladding was conducted on an AC2B alloy with feeding Fe-based powders. A powder feeding rate (PFR) and a travel velocity were related with the cracks adjacent to the Fe/Al interface. Preheating temperature was varied to study the interface crack. Preheating to $250^{\circ}C$ during the laser cladding suppressed the interface crack ratio (ICR). The ICR was limited for the single pass clad and the reciprocating test for the slide wear was conducted on an overlay cladding experiment. Comparing with no overlap overlay, the overlay clad with 50% overlap showed better wear resistance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.240-240
• /
• 2000

This paper presents two algorithms based on the concept of the frequency domain adaptive filter(FDAF). First the frequency domain recursive least squares(FRLS) algorithm with the overlap-save filtering technique is introduced. This minimizes the sum of exponentially weighted square errors in the frequency domain. To eliminate discrepancies between the linear convolution and the circular convolution, the overlap-save method is utilized. Second, the sliding method of data blocks is studied Co overcome processing delays and complexity roads of the FRLS algorithm. The size of the extended data block is twice as long as the filter tap length. It is possible to slide the data block variously by the adjustable hopping index. By selecting the hopping index appropriately, we can take a trade-off between the convergence rate and the computational complexity. When the input signal is highly correlated and the length of the target FIR filter is huge, the FRLS algorithm based on the block processing technique has good performances in the convergence rate and the computational complexity.

• 공학교육연구
• /
• 제19권5호
• /
• pp.57-64
• /
• 2016

This study is about interdisciplinary education model of using Davis Guggenheim's documentary film on global warming which is a big concern in climate change issues, An Inconvenient Truth. It based on Al Gore's slide speech. Through a course student analyzed the cause and phenomenon of global warming resulted from increase of $CO_2$ by using fossil fuel and its environmental science effects-heat wave, desertification, tornado, hurricane, sea level rise caused by melting glaciers, destroying ecosystem like habitat degradation of wild animals, for example polar bear, extreme cold wave caused by change of ocean currents- of global warming. After, student discussed of efforts to prevent global warming. This educational model is appropriate for lower grade student of environmental engineering and also available for converged majors or general education class.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.212-215
• /
• 2005

The needs of larger screen in mobile device would be increased as the time of ubiquitous and convergence is coming. And, the type of mobile device has been evolved from bar, slide to row. Recently, the study on the multi-display screen which has seamless gap between two display panel has been published, and moreover the System On Chip(SOC) design strategy of core chip has been the most promising Field-Programmable Gate Array(FPGA) technology in the display system. Therefore, in this paper, we proposed the design technique of SOC and evaluated the effectiveness with Very high speed Hardware Description Language(VHDL) Intellectual Property (IP) for the operation of multi display device driver. Also, This IP design would be to allow any kind of user interface in control system.

• 구강회복응용과학지
• /
• 제31권3호
• /
• pp.273-282
• /
• 2015

중심위에서 벗어나 있는 최대교두감합위는 상하악 치아의 조기접촉 및 사면활주의 직접적인 원인이며, 악관절 내장증, 치아마모, 치주질환 등을 일으킬 수 있다. 그러므로 광범위한 보철수복이 필요한 환자에서 중심위와 최대교두감합위의 불일치가 존재하는 경우 반드시 이를 제거하여 생리적인 교합양식을 회복해야 한다. 본 증례의 환자는 초진 시 약 3.5 mm의 사면활주와 다수의 우식 및 중등도의 치주질환을 앓고 있었다. 보철수복을 통해 기능 및 심미성을 회복하는 동시에 중심위와 최대교두감합위를 일치시켜 사면활주를 제거하였으며, ARCUSdigma II와 경두개 방사선 사진을 이용하여 생리적인 위치로 수정된 하악위와 변화된 개폐구 경로를 관찰하였다.