• Journal of Information Display
• /
• 제1권1호
• /
• pp.42-47
• /
• 2000

The relationship between driving voltage and the amount of wall charge in the address period of surface discharge type AC Plasma Display Panel has been investigated. The amount of wall charge on each electrode is obtained simultaneously from the current profiles after applying only one addressing discharge pulse. The wall charge $Q_y$ on the scan electrode Y is almost the sum of $Q_x$ on the address electrode X and $Q_z$ on the sustain electrode Z. The $Q_y$ increased with the driving voltage regardless of the kind of electrode, whereas the addressing $T_d$ decreased. The $Q_x$ and $Q_y$ are increased considerably by blocking voltage $V_z$, whereas $Q_x$ is decreased. The $V_z$ dependence of $Q_x$ $Q_y$ and ${\varrho}_z$ in addressing discharge was $-13{\times}10^{-2}$ (pc/$V_z$), and $60{\times}10^{-2}$ ($pc/V_z$) and $70{\times}10^{-2}(pc/V_z)$, respectively.

• 한국농림기상학회지
• /
• 제10권4호
• /
• pp.141-148
• /
• 2008

피음처리에 의한 네 참나무 수종(신갈나무, 졸참나무, 상수리나무, 굴참나무)의 광합성 반응 특성을 조사하기 위하여, 차광막으로 전천광을 35%, 55%. 75% 차광 처리한 조건과 전광조건에서 엽생장과 엽록소함량을 측정하고 광-반응 곡선과 A-Ci 곡선을 통하여 광합성계의 특성을 조사하였다. 그 결과, 굴참나무와 상수리나무는 엽생장, 엽록소함량, 순양자수율을 증가시키고 엽록소 a/b와 탄소고정효율을 감소시켜 빛의 흡수량과 광합성에 대한 이용효율을 높이는 적응 반응을 나타냈다. 신갈나무는 굴참나무와 상수리나무와 같은 경향의 적응반응을 보였지만 광합성 광화학계 활성의 저하로 낮은 광합성 능력을 나타냈다. 졸참나무는 가장 낮은 내음성 적응반응을 나타냈다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.220-223
• /
• 2005

We studied the effect of composition, processing, and sintering temperature on the microwave properties of $Mg_{3-x}Co_x(VO_4)_2$ system which is applicable to LTCC. When $Mg_{3-x}Co_x(VO_4)_2$ was fabricated by solid-state reaction process and sintered at the temperature range of $800\sim910^{\circ}C$, it was found that the optimum composition of x was 2 at which microwave properties of 910$^{\circ}C$-sintered one were as follows: $Q\times f_0\sim55,200GHz$ and $\varepsilon_r\sim10$. When $(MgCo_2)(VO_4)_2$ was fabricated by sol-gel process and sintered at 800$^{\circ}C$, $Q\timesf_0$was 34,400GHz which is much high compared to those fabricated by solid-state reaction process at the same sintering temperature.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.356-360
• /
• 2002

The piezoelectric properties of $0.05Pb(Al_{0.5}Nb_{0.5})O_3-0.95Pb(Zr_{0.52}Ti_{0.48})O_3+0.7wt%Nb_2O_5+o.5wt%MnO_2$ ceramics with the additive of BaCO$_3$were investigated. As the addition of BaCO$_3$increased from 0 to 0.4 wt%, the dielectric constant ($\epsilon^T _{33}$), piezoelectric constant ($d_33$), electromechanical coupling factor ($k_p$), and mechanical quality factor ($Q_m$) increased, while the dielectric loss ($tan\delta$) decreased. The highest piezoelectric and dielectric properties were observed at $1200^{\circ}C$ of the sintered temperature with 0.4 wt% of $BaCO_3$, and the properties of $d_33$, $k_p$, and $Q_m$ were 339 pC/N, 60% and 1754, respectively.

• International Journal of Oral Biology
• /
• 제46권1호
• /
• pp.1-6
• /
• 2021

Since the outbreak of coronavirus disease 2019 (COVID-2019), the infection has spread worldwide due to the highly contagious nature of severe acute syndrome coronavirus (SARS-CoV-2). To manage SARS-CoV-2, the development of diagnostic assays that can quickly and accurately identify the disease in patients is necessary. Currently, nucleic acid-based testing and serology-based testing are two widely used approaches. Of these, nucleic acid-based testing with quantitative reverse transcription-PCR (RT-qPCR) using nasopharyngeal (NP) and/or oropharyngeal (OP) swabs is considered to be the gold standard. Recently, the use of saliva samples has been considered as an alternative method of sample collection. Compared to the NP and OP swab methods, saliva specimens have several advantages. Saliva specimens are easier to collect. Self-collection of saliva specimens can reduce the risk of infection to healthcare providers and reduce sample collection time and cost. Until recently, the sensitivity and accuracy of the data obtained using saliva specimens for SARS-CoV-2 detection was controversial. However, recent clinical research has found that sensitive and reliable data can be obtained from saliva specimens using RT-qPCR, with approximately 81% to 95% correspondence with the data obtained from NP and OP swabs. These data suggest that self-collected saliva is an alternative option for the diagnosis of COVID-19.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.334-337
• /
• 2017

In this paper, to develop the ceramics with high $d_{33}$ and high $Q_m$ for ultrasonic transducer applications, $0.10Pb(Ni_{1/3}Nb_{2/3})O_3-0.07Pb(Mn_{1/3}Nb_{2/3})O_3-0.83Pb(Zr_{0.5}Ti_{0.5})_{0.83}O_3$ (PNN-PMN-PZT) ceramics were sintered at $940^{\circ}C$ using $CuO-Li_2CO_3-Bi_2O_3$ (CLBO) as a sintering aid by a traditional solid-state technique. The influence of zinc oxide additive on the physical properties of the prepared ceramics were systematically investigated. The R-T (rhombohedral-tetragonal) phase coexistence was found in the ceramics without zinc oxide additive and with increasing amounts of ZnO additive, the specimens showed a tetragonal phase. The formation of a liquid phase between ZnO and $Bi_2O_3$ contributed significantly to the grain growth of specimens. For the 0.1 wt% ZnO ceramics, the optimal physical properties of $d_{33}=370pC/N$, ${\varepsilon}_r=1,344$, $k_p=0.621$, and $Q_m=1,523$ were obtained.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.169-175
• /
• 2018

본 연구는 핵융합 배가스 중 삼중수소가 포함된 화합물인 메탄($CQ_4$) 및 물($Q_2O$)로부터 수소동위원소를 회수하기 위한 공정에 관한 것이다(Q는 수소, 중수소, 삼중수소). 수증기-메탄 개질반응과 수성가스 전환반응을 이용하여 $CQ_4$와 $Q_2O$를 $Q_2$로 변환시키고, 후속하는 팔라듐 분리막으로 생성된 $Q_2$를 회수한다. 본 연구에서는 $CQ_4$ 및 $Q_2O$ 중 하나의 물질인 $CH_4$ 및 $H_2O$로부터 수소 회수를 위해 촉매반응기, 팔라듐 분리막, 순환펌프로 구성된 순환루프를 적용하였다. 촉매반응온도 및 순환유량을 변화시켜가며 $CH_4$ 및 $H_2O$의 전환율을 측정하였다. $CH_4$ 중 수소 회수는 촉매반응온도 $650^{\circ}C$, 순환유량 2.0 L/min 조건에서 99% 이상의 $CH_4$ 전환율을확인하였고, $H_2O$ 중수소 회수는촉매반응온도 $375^{\circ}C$, 순환유량 1.8 L/min 조건에서 96% 이상의 $H_2O$ 전환율을 확인하였다. 이와 더불어, 향후 핵융합 실증로(K-DEMO)에서의 $CQ_4$ 발생량을 예측하고, 이에 대한 처리공정을 제안하였으며, HAZOP (Hazard and Operability) 분석을 실시하여 공정의 위험요소와 운전상의 문제점을 도출하고 해결방안을 제시하였다.

• 천문학회보
• /
• 제37권2호
• /
• pp.107.1-107.1
• /
• 2012

We present the results of far-ultraviolet (FUV) observations of comet C/2001 Q4 (NEAT) obtained with Far-ultraviolet Imaging Spectrograph (FIMS) on board the Korean microsatellite STSAT-1, which operated at an altitude of 700 km in a sun-synchronous orbit. FIMS is a dual-channel imaging spectrograph (S channel 900-1150 ${\AA}$, L channel 1350-1750 ${\AA}$, ${\lambda}/{\Delta}{\lambda}$ ~ 550) with large image fields of view (S: $4^{\circ}.0{\times}4^{\prime}.6$, L: $7^{\circ}.5{\times}4^{\prime}.3$, angular resolution 5'-10') optimized for the observation of diffuse emission of astrophysical radiation. Comet C/2001 Q4 (NEAT) was observed with a scanning survey mode when it was located around the perihelion between 8 and 15 May 2004. Several important emission lines were detected including S I (1425, 1474 ${\AA}$), C I (1561, 1657 ${\AA}$) and several emission lines of CO $A^1{\Pi}-X^1{\Sigma}^+$ system in the L channel. Production rates of the notable molecules, such as C I, S I and CO, were estimated from the photon fluxes of these spectral lines and compared with previous observations. We compare the flux and the production rates in the radius of $3{\times}10^5$ km with $20{\times}10^5$ km from the central coma. We obtained L-channel image which have map size $5^{\circ}{\times}5^{\circ}$ The image was constructed for the wavelength band of L-channel (1350 - 1710 ${\AA}$. We also present the radial profiles of S I, C I, CO obtained from the spectral images of the central coma. The radial profiles of $2{\times}10^6$ km region are compared with the Haser model.

• 에너지공학
• /
• 제23권2호
• /
• pp.183-190
• /
• 2014

국내 가동중원전은 2012년 이후 일반규격품 품질검증 이행 체계 구축을 위해 정책 수립 및 기술 개발, 일반규격품 품질검증 전문기관 양성, 국내 원전 공급사들의 일반규격품 품질검증프로그램 보유 추진 및 원자력 산업계의 전문인력 양성 등을 적극 추진 중에 있다. 아울러 미국 전력연구소(EPRI)의 관련 기술기준을 기반으로 일반규격품 품질검증프로그램 도입 초기에 개발된 안전성(Q) 등급 품목 품질검증 프로세스를 개선하였고, 국내 원전 고유의 원자력 품질등급 체계인 안전성영향(A) 등급 품목을 위해 안전성등급 품목과 차별화시킨 별도의 검증 프로세스를 개발하였다. 결과적으로, 위와 같은 노력을 통해 국내 가동중원전의 일반규격품 품질검증 이행 체계가 구축될 경우, 원전에서 사용하는 기자재의 신뢰성 및 안전성이 향상될 것으로 기대된다.

• 한국자기학회지
• /
• 제20권5호
• /
• pp.182-186
• /
• 2010

Cobalt가 치환된 NiZnCu ferrite의 소결 및 자기적 성질에 미치는 영향에 대해 연구 하였다. 칩인덕터용 $Ni_{0.36-x}Co_xZn_{0.44}Cu_{0.22}Fe_{1.98}O_4(0{\leq}x{\leq}0.04)$를 고상반응법으로 제조하였다. 소결조제를 사용하지 않고 $880{\sim}920^{\circ}C$에서 공기중 2시간 열처리 하였으며 초투자율, 품질계수 Q, 밀도, 수축율, 포화자화, 및 보자력을 측정하였다. Cobalt가 치환된 NiZnCu ferrite는 품질계수 Q를 증가시켰으며 칩인덕터용으로 사용 가능함을 알 수 있었다. 품질계수 Q는 치환량이 x = 0.01까지 증가한 후 x = 0.01 이후로 급격히 감소하였다. Cobalt의 치환량이 증가함에 따라 초투자율 및 밀도값은 감소하였다. $900^{\circ}C$에서 소성된 $Ni_{0.35}Co_{0.01}Zn_{0.44}Cu_{0.22}Fe_{1.98}O_4$ 토로이달 core 샘플의 경우 1 MHz에서 측정 시 초투자율값은 130이었고 품질계수 Q값은 230으로 나타났다.