• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.142.2-142.2
• /
• 2013

The effect of substrate on catalytic activity of CO oxidation with transition metal Platinum nanoparticles on doped and undoped TiO2 was investigated. Titanium dioxide was doped chemically with non-metal anions including nitrogen and fluorine. Undoped TiO2 was synthesized via simple conventional sol-gel route. Thin films of titania were developed by spin coating technique and the characterization techniques SEM, XRD, UV-Vis Absorption Spectroscopy and XPS were carried out to examine the morphology of films, crystal phase, crystallites, optical properties and elemental composition respectively. XPS analysis from doped TiO2 confirmed that the nitrogen site were interstitial whereas fluorine was doped into TiO2 lattice substitutionally. Catalytic activity systems of Pt/doped-TiO2 and Pt/undoped-TiO2 were fabricated to reveal the strong metal-support interaction effect during catalytic activity of CO oxidation reactions. By arc plasma deposition technique, platinum nanoparticles with mean size of 2.7 nm were deposited on the thin films of doped and undoped titanium dioxide. The CO oxidation was performed with 40 Torr CO and 100 Torr O2 with 620 Torr He carrier gas. Turn over frequency was observed two to three folds enhancement in case of Pt/doped TiO2 as compared to Pt/TiO2. The electronic excitation and the oxygen vacancies that were formed with the doping process were the plausible reasons for the enhancement of catalytic activity.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.251-255
• /
• 2009

나노사이즈의 귀금속을 $TiO_2$ 매트릭스에 균질하게 분산 시킨 구조는 염료감응형 태양전지의 유망한 광전극 특성을 나타내는 것으로 보고되고 있다. 이와 같은 금 및 백금 나노미립자를 균질하게 분산된 구조의 광전극을 제작하기 위하여 석영 및 ITO 기판위에 동시스퍼터법에 의하여 박막을 합성 하였다. XRD분석을 통하여 상분석을 수행 한 결과 합성된 나노컴포지트는 Rutile상이 지배적인 결정 구조를 나타냈으며 열처리를 $600^{\circ}C$까지 진행함에 따라 $TiO_2$ 결정성의 향상 및 귀금속인 금 및 백금의 나노미립자가 증가 하는 결과를 나타내었다. 귀금속인 금 및 백금이 분산된 $TiO_2$ 광전극에서는 자외선(UV) 영역을 포함하여 가시광(VIS) 영역의 빛의 조사에 광전류 응답 특성을 발현 하였다. 가시광선 영역에서 발현된 광전류 응답 특성은 나노사이즈로 분산된 금 및 백금 금속과 $TiO_2$와의 계면 준위에 기인 한 것으로 판명 되었다.

• 한국전기전자재료학회논문지
• /
• 제36권4호
• /
• pp.362-368
• /
• 2023

Multilayered actuators using Pb(Mg_1/3Nb_2/3)O₃-Pb(In_1/2Nb_1/2)O₃-PbTiO₃ (PMN-PIN-PT) crystals have demonstrated excellent properties, but are costly and lack mechanical strength. Textured PMN-PIN-PT ceramics exhibit robust mechanical strength and comparable properties to their single crystals form. However, the development of multilayered actuators using textured PMN-PIN-PT ceramics has not been achieved until now. This study presents the development of a multilayered actuator using textured 0.37PMN-0.29PIN-0.34PT ceramics with an Ag_0.9/Pd_0.1 inner electrode, co-fired at 950℃. A random 0.37PMN-0.29PIN-0.34PT ceramics multilayered actuator was also developed for comparison. The multilayered actuator consisted of 9 ceramic layers (36 ㎛ thickness) with an overall actuator thickness of 0.401 mm. The textured and random 0.37PMN-0.29PIN-0.34PT ceramics-based multilayered actuators achieved displacements of 0.61 ㎛ (0.15% strain) and 0.23 ㎛ (0.057% strain) at a low applied peak voltage of 100 V. These results suggest that the developed multilayered actuator using high-performance textured 0.37PMN-0.29PIN-0.34PT ceramics has the potential to replace expensive single crystal-based actuators cost-effectively.

• 한국자기학회지
• /
• 제8권6호
• /
• pp.374-379
• /
• 1998

Mn1-xCrxPt3 합금 박막을 유리기판상에 rf 마그네트론 스퍼터법으로 전이금속(Mn, Cr)과 Pt층을 적층하여 증착한우 열처리함으로써 제조하였다. 제조한 박막들의 소각 및 광각 x-선 회절 분석, 자기 히스테리시스 루우프, 커 스펙트럼을 실온에서 조사했다. 제조한 박막들은 (111)면이 막면에 평행으로 강하게 우선 배향된 AuCu3 형의 규칙합금 구조를 나타냈다. 포화자화는 Cr 치환량(x)이 증가함에 따라 감소하다가 x=0.58 부근에서 영에 가까워진 후 다시 증가하여 x=0.77 이상에서는 거의 일정한 값을 나타냇다. 이것은 페로자성인 MnPt3(x=0)에 Cr을 치환하며, Cr의 자기모멘트가 Mn과 반강자성적으로 결합하여포화자화가 감소하다가 Cr 치환량이 더욱 증가하면 Cr의 기여가 지배적이 되어 다시 증가하기 때문으로 생각된다. MnPt3의 경우에는 자화용이축이 막면에 평행이었으며, Cr 치환량이 증가합에 따라 수직자기이방성이 증가하여 x=0.58 이상에서는 수직자화막이 얻어졌다. 또한, 이 영역에서 Cr 치환량이 증가함에 따라 보자력도 증가하여 x=0.58 이상에서는 수직자화막이 얻어졌다. 또한, 이 영역에서 Cr 치환량이 증가함에 따라 보자력도 증가하여 CrPt3의 경우에는 약 4 kOe의 큰 값을 나타냈다. Cr 치환량에 따른 커 회전각의 변화 추이는 포화지화의 변화 추이와 경향이 유사했다. x=0.77과 x=1의 경우에는 근적외선 영역에서의 커 회전각이 기존의 광자기기록매체인 TbFeCo를 능가했다.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.963-968
• /
• 2009

Liquid crystal (LC; E7 and/or ML-0249)-embedded, poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-co-HFP)-based, polymer electrolytes were prepared for use in dye-sensitized solar cells (DSSCs). The electrolytes contained 1-methyl-3-propylimidazolium iodide (PMII), tetrabutylammonium iodide (TBAI), and iodine ($I_2$), which participate in the $I_3^-/I^-$ redox couple. The incorporation of photochemically stable PVdF-co-HFP in the DSSCs created a stable polymer electrolyte that resisted leakage and volatilization. DSSCs, with liquid crystal(LC)-embedded PVdF-co-HFP-based polymer electrolytes between the amphiphilic ruthenium dye N719 absorbed to the nanocrystalline $TiO_2$ photoanode and the Pt counter electrode, were fabricated. These DSSCs displayed enhanced redox couple reduction and reduced charge recombination in comparison to that fabricated from the conventional PVdF-co-HFP-based polymer electrolyte. The behavior of the polymer electrolyte was improved by the addition of optimized amounts of plasticizers, such as ethylene carbonate (EC) and propylene carbonate (PC). The significantly increased short-circuit current density ($J_{sc}$, $14.60\;mA/cm^2$) and open-circuit voltage ($V_{oc}$, 0.68 V) of these DSSCs led to a high power conversion efficiency (PCE) of 6.42% and a fill factor of 0.65 under a standard light intensity of $100\;mW/cm^2$ irradiation of AM 1.5 sunlight. A DSSC fabricated by using E7-embedded PVdF-co-HFP-based polymer electrolyte exhibited a maximum incident photon-to-current conversion efficiency (IPCE) of 50%.

• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.182-185
• /
• 2010

$Pb_{0.99}[(Zr_{0.6}Sn_{0.4})_{0.9}Ti_{0.1}]_{0.98}Nb_{0.02}O_3$ (PNZST) thin films were deposited by radio frequency magnetron sputtering on a $(La_{0.5}Sr_{0.5})CoO_3$ (LSCO)/Pt/Ti/$SiO_2$/Si substrate using a PNZST target with an excess PbO of 10 mole%. The thin films deposited at the substrate temperature of $500^{\circ}C$ crystallized to a perovskite phase after rapid thermal annealing (RTA). The thin films, which annealed at $650^{\circ}C$ for 10 seconds in air, exhibited good crystal structures and ferroelectric properties. The remanent polarization and coercive field of the fabricated PNZST capacitor were approximately $20uC/cm^2$ and 50 kV/cm, respectively. The reduction of the polarization after $2.2\;{\times}\;10^9$ switching cycles was less than 10%.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.78-79
• /
• 2002

It is well known that surface and interface roughnesses greatly affect the magnetic properties such as magnetic domain structure, magnetization reversal, magnetoresistance, and spin reorientation transition (SRT) of ultrathin magnetic films. Therefore, recent studies focus on artificially roughened surface, since it could be possible to systematically understand the effect of roughness on the magnetic properties as well as to obtain the desirable magnetic properties by artificially creating the surface structure and morphology. (omitted)

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.121-125
• /
• 2014

$CoFe_2O_4(CFO)/BaTiO_3(BTO)/CoFe_2O_4(CFO)$ multilayered thin films were deposited on $Pt/TiO_2/SiO_2/Si$ substrates by the pulsed laser deposition (PLD) system with KrF excimer laser (${\lambda}=248nm$). BTO, CFO, BTO/CFO and CFO/BTO/CFO structured thin films were prepared and their crystal structures and microstructures, as well as their magnetic and magneto-electrical properties, were studied. The C-V characteristics of these multilayered thin films with different capacitor structures were obtained to confirm the change in their capacitances under a magnetic field. Finally, the capacitance of the CFO/BTO/CFO thin film as a function of bias voltage under an in-plane magnetic field of 1,000 Oe increased to 951.04 pF at 1 MHz, from 831.90 pF measured under no magnetic field, indicating 14.3% increase in magnetocapacitance.

• 한국결정성장학회지
• /
• 제26권2호
• /
• pp.84-88
• /
• 2016

PVT(Physical vapor transport)법을 이용하여 AlN 단결정을 성장시켰으며 유도 코일의 위치를 변화시켜가면서 핫존의 위치가 달라짐에 따라 변화하는 결과를 비교하였다. 그라파이트 도가니가 사용되었으며 그 규격은 ${\Phi}90{\times}H120$이었다. 온도는 $1950{\sim}2050^{\circ}C$이며 챔버 압력은 150에서 1 Torr까지 사용되었다. 또한 핫존은 실험 회차에 따라 변화를 주었으며 이 결과가 비교되었다. 핫존의 위치가 AlN 단결정 응축 위치에서부터 충분히 아래쪽(> 40 mm)인 경우 성장된 결정 사이즈는 다른 조건들에 비해 양호했지만(${\sim}300{\mu}m/hr$), 조건 재현성은 상당히 떨어졌다. 반대로 핫존과 AlN 성장 위치간의 거리가 가까워질수록 성장된 결정의 크기는 작아지고 결정의 핵이 생성되는 빈도는 낮아지면서 성장된 결정의 질의 안정성은 증가했다. 성장 속도와 품질 두 가지 면에서 초기 핫존 코일의 위치가 결정 성장 위치로부터 20 mm 정도일 때가 가장 우수했다. 핫존의 위치는 매우 민감한 결과를 주었고 이것에서 더 나아가 코일의 이동 속도 또한 최적으로 컨트롤 되어야만 최적의 성장 조건이 설정될 수 있다.

• 통합자연과학논문집
• /
• 제2권1호
• /
• pp.41-44
• /
• 2009

Photonic crystals containing multiple rugate structure are prepared by electrochemical etchings. Typically etched rugate PSi prepared in this study. Etching is carried out in a Teflon cell by using a two-electrode configuration with a Pt mesh counter electrode. They exhibit sharp photonic band gaps in the optical reflectivity spectrum. This reflectivity can be tuned to appear anywhere in the visible to near-infrared spectral range, depending on the programmed etch waveform. We study the method of full width half maxima and reflectivity index control by using amplitude.