• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2113-2120
• /
• 2011

In this paper, so as to improve spectral efficiency for cell-boundary users, we introduce a coordinated multi-point (CoMP) system, which is one of inter-cell cooperative transmission strategies studied in 3GPP long-term evolution-advanced (LTE-A) systems, and develop a system-level simulator to evaluate performance. To identify performance improvement of the system with inter-cell cooperative transmission, we select a 3GPP LTE system as a reference, which shows the highest performance among the existing mobile communication systems, and conduct a performance comparison. System-level simulation is performed based on widely-used OPNET tool. We implement modules including central unit (CU), CoMP eNodeB (CeNB), user equipment (UE), and multiple-input multiple-output (MIMO) channel model, while designing the inter-cell cooperative transmission system. Under WINNER wireless channel model and international telecommunication union (ITU) network model environments, we then evaluate the performance of edge users who belong to the lower 5% in terms of spectral efficiency. It is finally shown that throughput of the proposed CoMP system gets improved up to 2.5 times compared to that of the 3GPP LTE reference system.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.2
• /
• pp.61-71
• /
• 2006

An MP3 encoder chip has been designed and fabricated with the hardware and software co-design concepts. In the aspect of the software. the calculation cycles of the distortion control loop. which requires most of the calculation cycles in MP3 encoding procedure. have been reduced to $67\%$ of the original algorithm through the 'scale factor Pre-calculation'. By using a floating Point 32 bit DSP core and designing the FFT block with the hardware. we can get the additional reduction of the calculation cycles in addition to the software optimization. The designed chip has been verified using HW emulation and fabricated via 0.25um CMOS technology The fabricated chip has the size of $6.2{\time}6.2mm^2$ and operates normally on the test board in the qualitative and quantitative aspect.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.1
• /
• pp.21-25
• /
• 2005

As a means for year-round rearing of bumblebee, CO$_{2}$ -narcosis time favorable for colony development was identified in Bombus terrestris. CO$_{2}$ -narcosis time divided into five classes: 11 days of adult emergence (A-11), the day of adult emergence (A-0), late pupal stage (LP), middle pupal sta ge (MP), and early pupal stage (EP). In egg-laying characteristics, the oviposition rate of LP, A-11 and A-0 was over 76.0$\%$, but that of MP and EP was less than 61.1 $\%$. At the same time, the days needed to first oviposition shortened to 9.8 ­10.5 days in A-11, A-O and LP, comparing to 13.7 -16.1 days in MP and EP. The rate of colony foundation, progeny-queen produced and period of colony foundation of A-11 were the best results in among those at different CO$_{2}$-treatment time. The number of worker produced was 109.2 -110.5 in A-H, LP and A-H, comparing to 82.0 - 86.8 in MP and EP. Also, the number of progeny-queen produced of A-H, A-O and LP was 36.1, 41.0 and 71.3, respectively, which corresponded to 1.5 - 3.1 fold higher than MP and EP. Taken these together, CO$_{2}$-narcosis time favorable for colony development was determined to be 11 days of adult emergence. Also, the day of adult emergence and late pupal stage showed a positive effect on the oviposition and colony development in CO$_{2}$-narcosis time.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.13-18
• /
• 2016

In Internet of Things (IoT) environment, a variety of smart devices are connected to Internet through various network technologies such as 4G/5G, WiBro, Bluetooth, etc. in order to provide the remote monitoring service such as smart healthcare service, etc. Most standard mobility management protocols based on IETF Mobile IP may not be suitable for Internet of Things (IoT) environments due to constrained power, constrained CPU processing and memory capacity, and large signalling overhead which are inherently accompanied by various devices in IoT environments. In this article, we propose a new mobility management protocol CoMP (CoAP-based Mobility Managemenbt Protocol) for reliable mobility management in IoT environments. The architecture and algorithm to achieve both reliability and simplicity for IoT mobility management are proposed. Finally, performance has been evaluated by both mathematical analysis and simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.32-37
• /
• 2008

Freestanding hydride vapor phase epitaxy grown GaN(Gallium Nitride) substrates subjected to various polishing methods were characterized for their surface and subsurface conditions, Although CMP(Chemical Mechanical Polishing) is one of the best approaches for reducing scratches and subsurface damages, the removal rate of Ga-polar surface in CMP is insignificant($0.1{\sim}0.3{\mu}m$/hr) as compared with that of N-polar surface, Therefore, conventional MP(Mechanical Polishing) is commonly used in the GaN substrate fabrication process, MP of (0001) surface of GaN has been demonstrated using diamond slurries with different abrasive sizes, Diamond abrasives of size ranging from 30nm to 100nm were dispersed in ethylene glycol solutions and mineral oil solutions, respectively. Significant change in the surface roughness ($R_a$ 0.15nm) and scratch-free surface were obtained by diamond slurry of 30nm in mean abrasive size dispersed in mineral oil solutions. However, MP process introduced subsurface damages confirmed by TEM (Transmission Electronic Microscope) and PL(Photo-Luminescence) analysis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.27-38
• /
• 2012

In this paper, we introduce CoMP in 3GPP LTE-Advanced Release 11 to take care of shadowing effects appearing in cell-edge areas to meet rapidly increasing demand for high speed transmission and multi-media data. In order to mitigate interference, orthogonalizing is ideal but it is slightly difficult to be applied to real systems. Therefore, interference alignment and avoidance are used in practical applications. Interference alignment is a scheme enabling us to consider interference our friend not enemy. We show lattice codes in Gaussian channel achieve Shannon capacity where strong interference exists. In addition, we show the relationship between channel parameter a and DoF(Degree of Freedom) applying lattice codes to interference alignment for interference channel with three users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.1828-1847
• /
• 2014

Coordinated multi-point (CoMP) transmission has been regarded as a potential technology for LTE-Advanced. In frequency division duplexing systems, channel quantization is applied for reporting channel state information (CSI). Considering the dynamic number of cooperation base stations (BSs), asymmetry feature of CoMP channels and high searching complexity, simply increasing the size of the codebook used in traditional multiple antenna systems to quantize the global CSI of CoMP systems directly is infeasible. Per-cell codebook based channel quantization to quantize local CSI for each BS separately is an effective method. In this paper, the theoretical upper bounds of system throughput are derived for two codeword selection schemes, independent codeword selection (ICS) and joint codeword selection (JCS), respectively. The feedback overhead and selection complexity of these two schemes are analyzed. In the simulation, the system throughput of ICS and JCS is compared. Both analysis and simulation results show that JCS has a better tradeoff between system throughput and feedback overhead. The ICS has obvious advantage in complexity, but it needs additional phase information (PI) feedback for obtaining the approximate system throughput with JCS. Under the same number of feedback bits constraint, allocating the number of bits for channel direction information (CDI) and PI quantization can increase the system throughput, but ICS is still inferior to JCS. Based on theoretical analysis and simulation results, some recommendations are given with regard to the application of each scheme respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.4092-4104
• /
• 2017

In this paper, an efficient 4K and 8K UHD(Ultra High Definition) transmission scheme is proposed on the convergence networks with broadcasting and LTE(Long Term Evolution) by using CoMP(Coordinated Multi-Point). A video data is compressed and divided into BL(Base Layer), E(Enhanced layer)1, E2 and E3 by scalable HEVC(High Efficiency Video Coding). The divided layers can be combined by the scalable HEVC such as mobile HD, full HD, 4K and 8K UHD(Ultra High Definition). The divided layers are transmitted through the convergence networks with DVB-T2(Digital Video Broadcasting-$2^{nd}$ Generation Terrestrial) broadcasting system and LTE CoMP. This scheme transmits mobile HD and full HD layers through DVB-T2 broadcasting system by using M-PLP(Multiple-physical Layer Pipes), and adaptively transmits 4K or 8K UHD layer through LTE CoMP with MMT(MPEG Media Transport) server. An adaptive transmitting and receiving scheme in the LTE CoMP system provides 4K or 8K UHD layer to a user according to the user status. The proposed scheme is verified by showing the system-level simulation results which is better BER(bit-error-rate) performance than the conventional scheme. The results show that the proposed scheme provides the stable video contents to the user especially at the cell edge.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.30-31
• /
• 2020

일반적으로 CCTV 녹화기는 24시간 중단없이 다중 카메라로 부터 수신되는 Video, Audio, Meta 데이터를 파일형태로 저장한다. 그리고 다양한 IoT 센서들은 사건(event)이 발생되었을 때, 입력되는 데이터를 기록한다. 그런데 이 형태의 데이터를 통합하여 사용하는 서비스들에 대한 요구가 증대되고 있다. 그런데 영상데이터와 IoT센서 데이터를 분리해 저장하고 관리하는 기존의 방식으로는 사용 센서의 개수 등에 따라 물리적인 크기가 커지고 관리의 복잡성이 커지는 문제가 발생한다. 본 논문에서는 다중 카메라로부터 입력되는 동영상 데이터와 IoT 센서 데이터를 통합하여 저장하는 방안을 제시한다. 이러한 통합 데이터의 고속 입출력을 지원하기 위해, 본 연구에서는 자체 파일시스템을 개발하였고 저장되는 각각의 파일을 mp4 표준을 따르게 하여 호환성을 보장하도록 구현하였다. 그래서 동영상 파일 포맷으로 널리 사용되는 MP4 포맷에 IoT센서 데이터를 함께 저장함으로써 동영상과 IoT센서의 정보를 효율적으로 관리하고 검색의 편의성을 높일 수 있게 되었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.225-228
• /
• 2010

본 논문은 CoMP 기법이 적용된 다중 사용자 MIMO-OFDMA 시스템을 위한 자원할당 알고리즘을 제안한다. 제안된 알고리즘에서는 eNode B가 RRE와 UE간의 채널 정보를 이용하여 전체 송신 전력 제한을 가지면서 전체 데이터 레이트가 최대가 되도록 자원을 할당한다. 자원할당 알고리즘을 통해 얻어진 결과를 이용하여 부반송파에 다수의 UE들이 할당된다. 할당된 UE들은 각각 MIMO 채널을 통해 다수의 공간경로를 갖고 각 공간경로에서는 할당된 전력에 따라 QPSK, 16QAM, 64QAM 중 하나를 선택하여 전송한다.