• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1516-1524
• /
• 2013

To find a novel skin whitening agent, the effect of cordycepin-enriched Cordyceps militaris (CM${\alpha}$) extract fermented by fungi on anti-melanogenesis in B16F0 mouse melanoma cells was investigated. Fermented CM${\alpha}$ was prepared with fungi, including Monascus purpureus (Mp), Aspergillus oryzae (Ao), Aspergillus kawachii (Ak), and Rhizopus oryzae (Ro), respectively. When the content of the phenolics and the flavonoids and the activities of the antioxidant and the mushroom tyrosinase inhibition were measured in the CM fermented by Ak (AkF-CM), the highest content of the phenolics was 46 mg/g dry weight and the highest content of the flavonoids was 0.93 mg/g; the highest activity of the DPPH radical scavenging was 62.74% and the highest activity of the mushroom tyrosinase inhibition was 79.97% CM${\alpha}$CM${\alpha}$. From this result, AkF-CM${\alpha}$ exhibited the highest mushroom tyrosinase inhibitory activity and so it was used in subsequent anti-melanogenesis. B16F0 melanoma cells were treated with 1-10 mg/ml concentrations of AkF-CM${\alpha}$ and 200 ${\mu}M$ arbutin as the positive control. The melanin content and cell viability of the melanoma cells by arbutin treatment decreased to 43% and 92% of the control, respectively. AkF-CM${\alpha}$ treatment at 1, 3, and 5 mg/ml concentrations decreased the extracellular melanin release induced by IBMX treatment by 35%, 45%, and 53%, respectively. AkF-CM${\alpha}$ showed inhibitory activity against both intracellular tyrosinase in melanoma cells and mushroom tyrosinase. AkF-CM${\alpha}$ reduced the protein level of tyrosinase in the IBMX-stimulated cells. These results indicate that AkF-CM${\alpha}$ suppressed the activity and protein content of cellular tyrosinase and decreased the total melanin content in cultured B16F0 melanoma cells.

• Korean Journal of Food Science and Technology
• /
• v.13 no.2
• /
• pp.121-126
• /
• 1981

An adenine-guanine doubless and $\beta$-alanine requiring mutant, D-1550-40, which had been derived from Brevibacterium ammoniagenes ATCC 6872, produced a copious amount of xanthosine-5'-monophosphate (XMP). The optimum concentration of adenine and guanine for maximal accumulation of XMP was about 75 ml/l and 100 ml/l for growth. Concentrations higher than 100 mg/l of adenine and guanine inhibited cell growth and XMP accumulation strongly. The inhibition, however, could be recovered by adding $100{\mu}g$ of biotin per liter or 0.3% of casamino acids to the culture solution. High concentrations of phosphate and magnesium salts (1.0 to 1.5%(w/v) in media) were found to be indispensable for XMP accumulation, and the presence of manganese in the culture medium stimulated both growth of cells and accumulation of XMP leaving 5'-inosinic acid unaffected. The maximal accumulation of XMP reached to 60.5 mg/l after 4 days of fermentation which had been started with a medium containing 100 mg of adenine-guanine, 5 mg of $MnSO_4{\cdot}H_2O$ and $100{\mu}g$ of biotin per liter. The specific XMP synthesis(mg of XMP/mg of cells) was increased with the increase of the cell growth rate.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2010

To enhance the transport properties of gas separation membrane, we prepared 6FDA-6FpDA based polyimide membrane with PMMA-graft-silica nanoparticles. The silica was grafted PMMA which is miscible with 6FDA-based polyimide after surface treatment by 3-methacryloxypropyltrimethoxysilane ($\gamma$-MPS). The untreated silica/6FDA-6FpDA membrane showed greater permeability and less selectivity than PMMA-g-silica/6FDA-6FpDA due to its low dispersion. The transport properties of PMMA-g-silica/6FDA-GFpDA membrane were measured as a function of filler concentration. These membranes were evaluated using pure gases (He, $O_2$, $N_2$, $CO_2$). The increase in permeation was attributed to changes in the free volume distribution until 1 wt%. After 1 wt%, the permeability was decreased by excess silica which decreased effective area in polymer matrix. The selectivity was decreased with increasing permeability on the whole. However, the selectivity of $CO_2$ showed more enhance value.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.105-117
• /
• 2015

In this paper, we consider 19 cells with the two tiers for polar-rectangular coordinates (PRCs) and provide the cell edge performance of cellular networks based on distance from cell center i.e., BS (base station). When FFR is applied(or adopted) to cell edge, it is expected that BS cooperation, or a coordinated multipoint (CoMP) multiple access strategy will further improve the system performance. We proposed a new method to evaluate the sum rate capacity of the MIMO DC of multicell system. We improve the performance of cell edge users for intercell interference cancelation in cooperative downlink multicell systems. Simulation results show that the proposed scheme outperforms the reference schemes, in terms of cell edge SINR (signal-to-interference-noise ratio) with a minimal impact on the network path loss exponent. We show 13 dB improvements in cell-edge SINR by using reuse of three relative to reuse of one. BS cooperation has been proposed to mitigate the cell edge effect.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.175-186
• /
• 2013

Based on Model Code 2010, flexural and residual strength, flexural toughness of SFRC with design strength of 60 MPa are evaluated. For comparisons, SFRC with design strength 40 MPa was tested. Distribution of steel fibers in crack surface of specimens was evaluated by visual inspection. The used steel fibers were hooked fibers with aspect ratio of 64, 67 and 80. In all specimens, mix ratio of steel fibers was 0.5% Vol. In results, only SFRC with the highest aspect ratio satisfied requirements specified in Model Code 2010. The results demonstrated that the use of high aspect ratio will provide enough flexural toughness for high strength concrete. Also, it is found that low slump of high strength concrete can help to enhance isotropic fiber distribution.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.97-101
• /
• 2014

We propose a timing-offset resilient OFDMA with achieving full diversity for uplink cooparative base station (BS) systems. In uplink OFDMA, timing offset (TO) among multiple users destroys subcarrier orthogonality and thus, it degrades the performance. In order to avoid this performance degradation, the accurate processing, so called 'ranging', is required to synchronize. However, in cooparative BS systems, it is difficult to perform ranging scheme. This is because if the ranging scheme is performed for a specific BS, timing offset has to occur for other BSs. Thus, the conventional ranging method cannot achieve full diversity gain in cooperative BS systems. By employing TO resilient OFDMA, so called, 'ZCZ time-spread OFDMA'. we achieve full diversity gain even with TO among multiple users. We show that the proposed scheme achieves the same performance with case of no multiple acces interference.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.312-316
• /
• 2015

PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens ($25.0{\times}3.0{\times}0.5mm$) were prepared by SLS and fired with the ceramic ($8.0{\times}3.0{\times}0.5mm$) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (${\alpha}$=.05). RESULTS. The mean values of Duceram Kiss ($61.18{\pm}6.86MPa$), Vita VM13 ($60.30{\pm}7.14MPa$), Ceramco 3 ($58.87{\pm}5.33MPa$), Noritake EX-3 ($55.86{\pm}7.53MPa$), and Vintage MP ($55.15{\pm}7.53MPa$) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.268-276
• /
• 2013

In this paper, we introduce the technologies to handle the interference in the heterogeneous network and evaluate the performance of enhanced Inter-Cell Interference Coordination (enhanced ICIC, eICIC) techniques that are being introduced in 3GPP Release 10. In the time-domain eICIC scheme, time-domain resources are scheduled to avoid the interference by using Almost Blank Subframe (ABS) and Cell Range Expansion (CRE). To mitigate the cross-tier interference between macro and femtocell, it is important to efficiently combine the ABS and CRE in heterogeneous network. Since it is hard to evaluate the total throughput of heterogeneous network numerically, we evaluate the total throughput by using system level simulation (SLS). As a result of evaluation, the throughputs of many different cases of combination of ABS and CRE are compared.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.627-640
• /
• 2008

The geometrical structures, atomic charges, and relative energies of tetracoordinated Pd complexes [PdCl3Z (Z = Cl-, Br-, OH?-, H2O, NH3, PH3), PdCl2Z2 (Z = Br-, OH?-, H2O, NH3, PH3), PdZ?2X (Z = Cl-, OH?-, H2O, NH3, PH3; X = oxalate, O2-?CCO2-), and PdZ2Y (Z = Cl?-, OH?-, H2O, NH3, PH3; Y = succinate, CO2-?CHCHCO2-?)] and the ligand exchange reactions of the Pd complexes were investigated using the ab initio second order Mller-Plesset perturbation (MP2) and Density Functional Theory (DFT) methods. The geometrical characteristics of the tetracoordinated Pd(II) complexes with mono- and bidentate ligands, the effects of the atomic charges for the charged and uncharged ligands, the (dz2-p ) interactions between the dz2-orbital of Pd(II) and the p -orbital of bidentates, and the relative stabilities between the isomers of PdCl2Z2 and PdZ2Y were investigated in detail. The potential energy surfaces for the ligand exchange reactions used for the conversions of {[PdCl2(NH3)2] + H2O} to {[PdCl(NH3)2(H2O)]+ + Cl?-?} and {[PdCl2(PH3)2] + H2O} to {[PdCl(PH3)2(H2O)]+ + Cl?-?]} were investigated. The geometrical structure variations, molecular orbital variations (HOMO and LUMO), and relative stabilities for the ligand exchange processes were also examined quantitatively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.797-804
• /
• 2012

In this paper, we propose a QAPM(Quadrature Amplitude Position Modulation) modulation using compressive sensing for the purpose of power efficiency improvement. QAPM modulation is a combination technique of QAM (quadrature amplitude modulation) and PPM(Pulse Position Modulation). Therefore it can decrease the transmission power and improve BER performance. Moreover, even if the band width is widened when the number of positions is increased, high sparsity characteristic caused by position number can be applied to compressive sensing technique. Compressive sensing has recently studied as a method that can be successfully reconstructed from the small number of measurements for sparse signal. Therefore, the proposed system can lower price of receiver by reducing sampling rate and has performance improved by using QAPM modulation. And the results are confirmed through simulations.