• 한국재료학회지
• /
• 제33권3호
• /
• pp.95-100
• /
• 2023

This research examines the effect of adding aluminum on the structural, phasic, and magnetic properties of CoCrFe NiMnAl_x high-entropy alloys. To this aim, the arc-melt process was used under an argon atmosphere for preparing cast samples. The phasic, structural, and magnetic properties of the samples were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), and vibrational magnetometry (VSM) analyses. Based on the results, the addition of aluminum to the compound caused changes in the crystalline structure, from FCC solid solution in the CoCrFeNiMn sample to CoCrFeNiMnAl BBC solid solution. It was associated with changes in the magnetic property of CoCrFeNiMnAl_x high-entropy alloys, from paramagnetic to ferromagnetic. The maximum saturation magnetization for the CoCrFeNiMnAl casting sample was estimated to be around 79 emu/g. Despite the phase stability of the FCC solid solution with temperature, the solid solution phase formed in the CrCrFeNiMnAl high-entropy compound was not stable, and changed into FCC solid solution with temperature elevation, causing a reduction in saturation magnetization to about 7 emu/g.

• 한국재료학회지
• /
• 제28권10호
• /
• pp.595-600
• /
• 2018

This study investigates the microstructural properties of CoCrFeMnNi high entropy alloy (HEA) oxynitride thin film. The HEA oxynitride thin film is grown by the magnetron sputtering method using nitrogen and oxygen gases. The grown CoCrFeMnNi HEA film shows a microstructure with nanocrystalline regions of 5~20 nm in the amorphous region, which is confirmed by high-resolution transmission electron microscopy (HR-TEM). From the TEM electron diffraction pattern analysis crystal structure is determined to be a face centered cubic (FCC) structure with a lattice constant of 0.491 nm, which is larger than that of CoCrFeMnNi HEA. The HEA oxynitride film shows a single phase in which constituting elements are distributed homogeneously as confirmed by element mapping using a Cs-corrected scanning TEM (STEM). Mechanical properties of the CoCrFeMnNi HEA oxynitride thin film are addressed by a nano indentation method, and a hardness of 8.13 GPa and a Young's modulus of 157.3 GPa are obtained. The observed high hardness value is thought to be the result of hardening due to the nanocrystalline microstructure.

• 한국분말재료학회지
• /
• 제29권2호
• /
• pp.132-151
• /
• 2022

The CoCrFeMnNi high-entropy alloy (HEA), which is the most widely known HEA with a single face-centered cubic structure, has attracted significant academic attention over the past decade owing to its outstanding multifunctional performance. Recent studies have suggested that CoCrFeMnNi-type HEAs exhibit excellent printability for selective laser melting (SLM) under a wide range of process conditions. Moreover, it has been suggested that SLM can not only provide great topological freedom of design but also exhibit excellent mechanical properties by overcoming the strength-ductility trade-off via producing a hierarchical heterogeneous microstructure. In this regard, the SLM-processed CoCrFeMnNi HEA has been extensively studied to comprehensively understand the mechanisms of microstructural evolution and resulting changes in mechanical properties. In this review, recent studies on CoCrFeMnNi-type HEAs produced using SLM are discussed with respect to process-induced microstructural evolution and the relationship between hierarchical heterogeneous microstructure and mechanical properties.

• 한국해양학회지
• /
• 제18권1호
• /
• pp.49-54
• /
• 1983

진해만의 중금속 오염 현황 파악을 위하여 퇴적물중의 중금속 함량을 조사 하였다. 조사된 중금속은 Cd, Cr, Cu, Fe, Ni, Mn, Pb, Zn등 9가지 원소이며 모두 23개 조사점에서 시료를 채취하여 원자흡수 분광법에 의해 중금속 함량을 분석 하였다. 본 조사 결과로는 Cd, Cr, Cu, Pb, Zn 등의 함량은 마산만이 다른 해역 보다 월등히 높았으며 또 내만에서 외양으로 나갈수록 함량이 뚜렷하게 감소 하였으나 Co, Fe, Ni, Mn 등은 해역간에 별다른 농도 차이를 나타내지 않았다. 중금속의 통계학적 상관 관계를 보면 Cd, Cr, Cu, Pb, Zn group과 co, Fe, Ni group 으로 나뉘어져 각 group 내에서중금속 상호간에 유의성 있는 상관 관계를 나타내었으나 group 간에는 상관 관계를 보이지 않았다.

• 한국세라믹학회지
• /
• 제44권11호
• /
• pp.639-644
• /
• 2007

Spinel pigments, developing black color in high temperature glazes at oxidation or reduction atmosphere, without CoO because of its high price were synthesized by solid solution method. Ten mixed compositions consisted of NiO, MnO, $Fe_2O_3 and $Mn_2O_3$ were fired at $1250^{\circ}C$ for 1h. The resulting pigments were characterized by using XRD, FT-IR, SEM and UV-vis spectrometer. Structure of the pigments are spinel and particles' shape are spherical or cubic. Glazed tiles containing 5 wt% pigments were fired at $1260^{\circ}C$ and $1240^{\circ}C$ in reduction atmosphere. Color in glazes were analyzed by UV-vis spectrometer. Colors of NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0125 mole% and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole% in lime glaze showed black in oxidation, in reduction NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0125 mole% and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.55{\cdot}Mn_2O_3$ 0.0125 mole% showed black. In case of lime-barium glaze, NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole%, NiO 0.975 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% and NiO 0.925 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% showed black color in oxidation and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole%, NiO 0.925 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% and NiO 0.725 MnO $0.275{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% showed black one in reduction.

• 한국자기학회지
• /
• 제3권1호
• /
• pp.7-12
• /
• 1993

저열팽창재료인 Fe-36%Ni 인바합금을 기본조성으로 하여 제3원소인 Mn, Cr, Co를 0-5wt% 범위에서 소량 첨가하고 자기적성질의 변화를 조사였다. 상온에서 $300^{\circ}C$까지의 온도에 따른 비자화의 변화는 조성에 따라 약간의 차이는 있지만 5wt%Co를 제외하고 상온으로 부터 큐리온도 직 하인 $250^{\circ}C$까지 온도상승에 따라 지바화가 매우 빠르게 감소하고, 첨가원소에 따른 비자화의 온도의존성이 온도의 3/2승항과 2승항을 혼합한 형태로 나타나는 인바합금 특유의 형상을 보인다. 상온에서 첨가원소에 따른 비자화, 큐리온도 및 보자력은 동일 함량으로 치환할 경우에 Co > Cr > Mn 의 순서로 높게 나타나지만, 5wt%Co의 경우에 급증하는 현상은 강자성 $\gamma$상과 반강자성 $\gamma$상이 혼재하는 인바효과가 강자성 $\alpha$ 상이 생성됨에 따라 사라지기 때문이었다.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.505-510
• /
• 2014

The properties of black ceramic pigments including thermal and glaze stability were systematically investigated so that these pigments could be used to decorate porcelain products. Various compositions of $(Ni,Mn)(Fe,Cr,Mn)_2O_4$ and $Co(Fe,Cr)_2O_4$ powders were synthesised using a solid state reaction method. The obtained $Co(Fe,Cr)_2O_4$ and $(Ni,Mn)(Fe,Cr,Mn)_2O_4$ powders showed single phases of spinel structure after calcination processes at $1000^{\circ}C$ and $1200^{\circ}C$, respectively. CIE $L^*a^*b^*$ colourimetric parameters of glazed $Co(Fe,Cr)_2O_4$ and $(Ni,Mn)(Fe,Cr,Mn)_2O_4$ pigments were analyzed according to the different amounts of Cr substitution. In addition, the amount of $Cr^{+6}$ remaining in the $Co(Fe,Cr)_2O_4$ and $(Ni,Mn)(Fe,Cr,Mn)_2O_4$ pigments was also measured.

• 한국수소및신에너지학회논문집
• /
• 제10권3호
• /
• pp.185-189
• /
• 1999

Effects of alloy modification with the $Zr_{0.6}Ti_{0.4}V_{0.4}Ni_{1.2}Mn_{0.4}$ alloy for an electrode use have been investigated. For the alloy composition, a part of Mn was substituted by Co, Cr and Fe. The experimental results showed that Co accelerated activation of alloy, and Fe and Cr improved the discharge capacity. These results agree with P-C-T curves of each alloy. But substituting Fe for Mn showed the decrease of the discharge capacity when discharged at high rate (60mA, about 1C rate). Considering both the discharge capacity and the high rate discharge property, $Zr_{0.6}Ti_{0.4}V_{0.4}Ni_{1.2}Mn_{0.3}Cr_{0.1}$ alloy was found to be the best alloy among the alloys subjected to the test.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1285-1292
• /
• 2018

Microstructural properties of as-grown and annealed CoCrFeMnNi high entropy alloy (HEA) oxynitride thin films were investigated. The CoCrFeMnNi HEA oxynitride thin film was grown by magnetron sputtering method using an air gas, and annealed under the argon plus air flow for 5 h at $800^{\circ}C$. The as-grown film was homogeneous and uniform composed of nanometer-sized crystalline regions mixed with amorphous-like phase. The crystalline phase in the as-grown film was face centered cubic structure with the lattice constant of 0.4242 nm. Significant microstructural changes were observed after the annealing process. First, it was fully recrystallized and grain growth happened. Second, Ni-rich region was observed in nanometer-scale range. Third, phase change happened and it was determined to be $Fe_3O_4$ spinel structure with the lattice constant of 0.8326 nm. Hardness and Young's modulus of the as-grown film were 4.1 and 150.5 GPa, while those were 9.4 and 156.4 GPa for the annealed film, respectively.

• 한국해양학회지
• /
• 제18권1호
• /
• pp.29-42
• /
• 1983

濟州道周圍 大陸棚地域과 韓半島 南海沿岸에서 總 39個의 海底堆積物中의 重金屬含量이 測定되었다. 濟州道周圍의 平均含量은 Zn 59.1ppm, Mn 362.6ppm, Cr 63.8ppmiouPb 15-7ppm, Co 10.0ppm, Ni 28.9ppm, Cu 10.5ppm, Fe 2.7%로 나타났다. 南海沿岸에서는 Zn 79.5ppm, Mn 384ppm, Pb 8.6ppm, Ni 17.8ppm, Cu 23.2ppm, Fe 1.59%로 나타났다. 濟州道周圍에서는 細粒質堆積物이 分布하는 北西部가 기타 地域에 比해 높다. 反面 南海沿岸에서는 地域的 傾向成이 나타나지 않지만 馬山灣과 鎭海灣은 周圍隣近陸上의 産業活動에 의한 影響으로 他地域에 比해 높게 나타난다. 그러나 馬山灣과 鎭海內灣에서 Zn과 cu의 高含量을 除外 하고는 全體的으로 世界沿岸堆積物의 平均치에 미치지 못하는 낮은 含量이다. 각 表示成分間의 相關性은 濟州道周圍에서 Zn-Cu, Ni-Cu, Fe-cu, Cr-Cu, Co-Zn, Ni-Zn, Cr-Zn, Ni-Co, Fe-Co, Cr-Co, Fe-Ni, Cr-Ni, Cr-Fe간에 密集한 正의 相關性이 나타나며, Pb, Mn을 除外한 全元元素成分이 粒度와 良好한 正의 相關性을 나타내 粒子가 細立일수록 元素의 吸着率이 크다. 南海沿岸에서는 Cu-Zn, Cu-ni 및 Ni-Mn를 除外하고는 相關關係가 不良하다. 이는 堆積環境이 地域別로 다르고 또한 陸上의 人爲的 活動에 따른 流入含量의 差異에서 온 것으로 생각된다.