• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.381-391
• /
• 1999

A new 5th generation adhesive system(ONE-STEP) has been supplied which operators can apply to conditioned tooth surfaces by one simplified step. The purpose of this study was to determine whether different methods of adhesive application and various air drying duration after applying adhesive affect the shear bond strength of composite resin to dentin, and to evaluate the adhesive pattern of composite resin and dentin under SEM. Seventy-seven extracted human molar teeth were cleaned and mounted in palstic test tubes. The occlusal dentin surfaces were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A.). Teeth were randomly divided into 7 groups (n=11), In experimental A group, adhesive was applied to dentin with agitation for 20 sec. In experimental N-A group, adhesive were continuously applied to dentin for 20 sec. Also control and experimental 1, 2, 3, 4 groups were dried for 10, 0, 5, 20, 30 seconds after applying adhesive, respectively, Adhesives were light cured for 10 sec. A gelatin capsule 5mm in diameter was filled with Aelitefil$^{TM}$ composite resin, placed on the treated dentin surface and light cured for 40 see, from three sides, All specimens were stored in distilled water at room temperature for 24 hours. The shear bond strengths were measured using a universal testing machine(AGS-1000 4D, Japan) at a crosshead speed of 5mm/min. An one-way ANOVA and LSD test were used for statistical analysis of the data. For SEM evaluation, seven specimens were made and sectioned. Representive postfracture and seven specimens were mounted on brass stubs, sputter-coated with gold and observed under SEM. The results were as follows : 1. The shear bond strength of experimental A group which adhesive were applied to dentin with agitation was higher than that of experimental N-A group (continuous application), and there was significant difference between two groups (p<0.01). 2. The interface between composite and dentin according to different application methods showed close adaptation in experimental A group and showed tinny gap in experimental N-A group. 3. The shear bond strength accoding to various air drying duration was the lowest value(7.57${\pm}$2.60 MPa) in experimental 1 group, so there was significant difference between experimental 1 group and other four groups (p<0.05). But there was no significant difference of shear bond strength between four groups (p>0.05). 4. The interface between composite and dentin according to various air drying duration showed close adaptation in control group and tinny gap in experimental 3 and 4 groups. But experimental 1 and 2 groups showed $30{\mu}$ and 6 - $10{\mu}m$ thick gaps, respectively.

• Journal of Periodontal and Implant Science
• /
• 제23권1호
• /
• pp.77-96
• /
• 1993

정상치아와 이환치아 및 구연산에 의하여 탈회한 치근면에대한 치주인대세포의 부착상태를 비교관찰 하기 위하여 정상치아와 이환치아를 취하여 정상군, 이환치근의 치근면활택술군 및 구연산처리군으로 분류하고 시험관적 실험을 통하여 관찰하였다. 세포부착실험전 각 군의 치근면의 형태를 주사전자현미경을 이용하여 관찰하였으며, 사람의 정상소구치에서부터 얻어진 치주인대세포를 배야하여 각 군의 절편을 함유한 조직배양기에 ml당 $4.5{\times}\;10^4$개의 세포를 가진 배양액 1ml씩을 넣고 동일조건하에서 30분, 1시간, 2시간, 6시간, 12시간 및 24시간 동안 배양한 후 세포의 부착이 일어난 후 상태를 주사전자현미경을 이용하여 관찰하였고, 세포증식정도를 알아보기 위하여 각 절편에 $5{\times}10^4$개의 세포가 함유된 배양액 1ml씩을 넣고 6시간동안 배양 후, 새 배양기에 옮기고 24, 48, 72시간동안 배양하여 trypsin 처리로 세포를 분리시킨 후 광학위상차 현미경을 이용, 치근단위면적당 증식된 세포수를 측정하여 다음과 같은 결과를 얻었다. 세포부착실험전 각 군의 치근면 형태를 관찰하였을 때 구연산처리군에서는 교원섬유의 노출부위라고 여겨지는 미세한 돌출구조들을 관찰할 수 있었으며 상아세관의 노출부위라고 여겨지는 함몰양상이 치근활택술군에 비하여 현저하였고 정상치아군에서는 이러한 양상을 관찰할 수 없었다. 실험 각 군 및 대조군 사이에서 세포들의 형태적인 차이점은 분명하지 않았으나 구연산처리군에서 다른 군들보다 초기의 세포부착양상이 다소 빠르게 진행 됨이 관찰되었다. 세포배양 개시 후 6시간이 경과 한 후에는 모든 군에서 공히 세포의 형태가 초기의 구형의 형태에서 편평한 세포의 형태로 변화되기 시작함이 관찰 되었고 24시간 이후에는 모든 군에서 세포들이 치근면에 납작하게 부착되고 일반적인 섬 유아세포의 형태로 변화되어 셰포의 전개가 완성된 양상이 보였다. 세포증식율의 실험에서는 24시간 후 증식된 세포 수는 치근면활택술군에서 가장높게 나타났으며 정상군에서 가장 낮은 수치를 보였으며 48시간 및 72시간후 측정에서는 구연산처리군이 다른 군들에 비해 더 많은 수의 세포증식을 관찰할 수 있었으며 각 군간의 차이는 통계학적으로 유의하였다.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.