• 제목/요약/키워드: Co-operative behavior

검색결과 7건 처리시간 0.021초

Behavior Evolution of Autonomous Mobile Robot(AMR) using Genetic Programming Based on Evolvable Hardware

  • Sim, Kwee-Bo;Lee, Dong-Wook;Zhang, Byoung-Tak
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제2권1호
    • /
    • pp.20-25
    • /
    • 2002
  • This paper presents a genetic programming based evolutionary strategy for on-line adaptive learnable evolvable hardware. Genetic programming can be useful control method for evolvable hardware for its unique tree structured chromosome. However it is difficult to represent tree structured chromosome on hardware, and it is difficult to use crossover operator on hardware. Therefore, genetic programming is not so popular as genetic algorithms in evolvable hardware community in spite of its possible strength. We propose a chromosome representation methods and a hardware implementation method that can be helpful to this situation. Our method uses context switchable identical block structure to implement genetic tree on evolvable hardware. We composed an evolutionary strategy for evolvable hardware by combining proposed method with other's striking research results. Proposed method is applied to the autonomous mobile robots cooperation problem to verify its usefulness.

행동조절이 어려운 소아환자의 Deep sedation을 이용한 치과치료 (THE USE OF DEEP SEDATION FOR THE DENTAL MANAGEMENT OF PEDIATRIC PATIENTS WITH DEFINITELY NEGATIVE BEHAVIOR)

  • 엄혜숙;윤형배
    • 대한소아치과학회지
    • /
    • 제25권4호
    • /
    • pp.710-716
    • /
    • 1998
  • It is one of difficulties to control children who show definitely negative behavior in dental clinic. In such a case, the pharmacologic management has been used to provide quality care, minimize the extremes of disruptive behavior, promote a positive psychologic response to treatment and patient welfare and safety. Deep sedation can be defined as a controlled, pharmacologically-induced state of depressed consciousness from which the patient is not easily aroused which may be accompanied by a partial loss of protective reflexes. In this retrospective report, the sedation records of 200 pediatric dental patients of ASA Class I & II who were not successfully treated under conscious sedation were used for analysis. Most frequently used regimen of deep sedation was the co-medication of midazolam(0.3mg/kg), enflurane(1.0-2.0 vol%) and 50-70% $N_2O_2$. The average age and weight of the patients was 4.6 yr (S.D: 2.72) and 18.7kg(S.D: 6.35) respectively. The average operative time was 52 minutes and midazolam (0.1-0.2cc) was additionally administered intranasally to prolong the operative time as needed. The episodes of untoward side effects were reported during and/or after the procedure in 58 patients. Serious adverse reactions such as cyanosis or laryngospasm were even reported in 7 patients but without mortality. Deep sedation is a very effective way of completing the dental treatments for those who failed to respond well to the conscious sedation. This technique has many practical advantages over general anesthesia case but the demands for the rigid monitoring criteria limit its use in general practice setting. The continuous efforts to improve the safety of the medication and the technique are required for the benefits of the patients and parent.

  • PDF

Evolutionary Design of a Fuzzy Logic Controller for Multi-Agent Systems

  • Jeong, Il-Kwon;Lee, Ju-Jang
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1998년도 제13차 학술회의논문집
    • /
    • pp.507-512
    • /
    • 1998
  • It is an interesting area in the field of artificial intelligence to and an analytic model of cooperative structure for multi-agent system accomplishing a given task. Usually it is difficult to design controllers for multi-agent systems without a comprehensive knowledge about the system. One of the way to overcome this limitation is to implement an evolutionary approach to design the controllers. This paper introduces the use of a genetic algorithm to discover a fuzzy logic controller with rules that govern emergent co-operative behavior: A modified genetic algorithm was applied to automating the discovery of a fuzzy logic controller jot multi-agents playing a pursuit game. Simulation results indicate that, given the complexity of the problem, an evolutionary approach to and the fuzzy logic controller seems to be promising.

  • PDF

UAV를 위한 이산사건 및 연속시간 시스템간의 연동 모델링에 대한 연구 (A study on the co-operative modeling between discrete-event system and continuous-time system for UAV system)

  • 강광천;지승도;유용준
    • 한국시뮬레이션학회논문지
    • /
    • 제15권1호
    • /
    • pp.43-50
    • /
    • 2006
  • UAV(Unmanned Air Vehicle) 시스템은 새로운 알고리즘과 소프트웨어 디자인에 바탕을 두고 빠르게 발전하고 있다. 빠르게 발전하는 현대의 UAV 시스템은 상황에 따른 효과적이고 지능적인 제어를 요구한다. 이에 본 논문에서는 UAV 시스템의 효과적이고 지능적인 제어를 위하여 이산사건 시스템인 조종사 모델과의 연동 모델링을 제안한다. 비행기 모델은 연속시간 시스템으로 표현되며, 자세한 표현력을 바탕으로 정량적이고 정확한 비행기 모델을 표현할 수 있다. 또한, 조종사 모델은 이산사건 시스템으로 표현되며, 각 사건과 시스템의 상태에 따른 정성적인 행동제어를 가능하게 한다. 본 연구는 한국항공대학교에서 개발한 이산사건 시뮬레이터인 DEJAVA(DEVS Java)와 연속시간시뮬레이터인 MATLAB 시뮬레이터 환경을 바탕으로 NASA에서 개발된 HL20 비행시뮬레이터와 지능제어시스템을 이용한 조종사 모델을 사용하여 구현되었다.

  • PDF

소비자 제품디자인 인식체계의 규명 (A Searching Product Design Cognizance System on Consumers)

  • 신택균
    • 디자인학연구
    • /
    • 제11권
    • /
    • pp.62-68
    • /
    • 1995
  • 최근 경영학 분야에서 소비자의 디자인 적 태도와 행동연구가 활발하고 일반 소비자들의 디자인의식 수준이 향상됨에 따라 디자인 분야에서도 마케팅 등 주변학문과 연계성을 도모하고 소비자행동에 관한 상호보완적 연구 성과를 위하여 많은 노력을 기울이고 있다. 이 연구는 이러한 노력의 일환이며 디자인 분야에 서 당연히 다루어져야 할 소비자의 디자인인식 과정에 관한 개념적 논술이다. 주요 내용으로서 소비자 구매행동에서 인지되는 제품과 관련된 제반의 다 속성 태도(Multiattribute Attitude)중 디자인 적 요소를 중점적으로 다루었다. 즉 소비자가 디자인을 의식한 상태에서 제품구매 의사결정에 어떻게 영향을 주는지 또 어떤 속성의 디자인 요소가 소비자 디자인인식에 작용하는지에 대한 내용을 이론적으로 규명하고자 하였다. 이를 위하여 먼저 소비자 행동과 제품구매행동의 상관적 이해를 바탕으로 디자인인식 환경을 고찰하고 아울러 정보인식 과정을 일련의 체계로 파악하여, 이 연구의 목적인 '소비자 제품디자인 인식체계'를 제시하였다.

  • PDF

구치부용 복합 레진 가열시 물리적 성질의 변화에 관한 실험적 연구 (THE EFFECT OF TEMPERATURE CHANGES ON THE PHYSICAL PROPERTIES OF POSTERIOR COMPOSITE RESINS)

  • 박연홍;민병순;최호영;박상진
    • Restorative Dentistry and Endodontics
    • /
    • 제14권1호
    • /
    • pp.41-56
    • /
    • 1989
  • The purpose of this study was to examine the effect of temperature dependence of the behavior on the physical properties of posterior composite resins. Three light cure posterior composite resins (Heliomolar, Litefil-P, and P-50) and one chemical cure posterior composite resin (Bisfil-II) were used as experimental materials. Composite resin was placed in a cylindrical brass mold (2.5 mm high and 6.5 mm inside diameter) that was rested on a glass plate. Another flat glass was placed on top of the mold, and the plate was tightly clamped together. After the mold had been filled with the light cure composite material, the top surface was cured for 30 seconds with a light source. Chemical cure resin specimens were made in the same manner as above. Three hundreds and twenty composite resin specimens were constructed from the four composite materials. One hundred and sixty specimens of them were placed in a heater at $50^{\circ}C$, $75^{\circ}C$, $100^{\circ}C$, $125^{\circ}C$, $150^{\circ}C$, $175^{\circ}C$ and $200^{\circ}C$ for 5 minutes or 10 minutes respectively before compressive strengths were measured. Another one hundred and sixty specimens were tested for the diametral tensile strengths in the same way as above. They were randomly divided into eight groups according to the mode of heating methods as follows and stored in distilled water at $37^{\circ}C$ for 24 hours. Group $37^{\circ}C$ - specimens were stored at $37^{\circ}C$ in distilled water for 24 hours. Group $50^{\circ}C$ - specimens were heated at $50^{\circ}C$ after curing. Group $75^{\circ}C$ - specimens were heated at $75^{\circ}C$ after curing. Group $100^{\circ}C$ - specimens were heated at $100^{\circ}C$ after curing. Group $125^{\circ}C$ - specimens were heated at $125^{\circ}C$ after curing. Group $150^{\circ}C$ - specimens were heated at $150^{\circ}C$ after curing. Group $175^{\circ}C$ - specimens were heated at $175^{\circ}C$ after curing. Group $200^{\circ}C$ - specimens were heated at $200^{\circ}C$ after curing. Twenty specimens of each of four composite resins were respectively made by insertion of materials into same mold for examining the dimensional changes between before and after heating. The final eighty specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before testing the dimensional changes. Compressive and diametral tensile strengths were measured crosshead speed 1mm/minute and 500Kg in full scale with a mechanical testing machine (DLC 500 Type, Shimadzu Co., Japan). Dimensional changes were determined by measuring the diametral changes of eighty specimens with micrometer (Mitutoyo Co., Japan). Results were as follows: 1. Diametral tensile strengths of specimens in all groups were increased with time heated compared with control group except for that in group $50^{\circ}C$ and the maximum diametral tensile strength was appeared in the specimen of Litefil-P heated for 10 minutes at $100^{\circ}C$. In heliomolar and P-50, it could be seen in the specimen heated for 10 minutes at $150^{\circ}C$, but in Bisfil-II, it could be found in the specimen heated for 5 minutes at $150^{\circ}C$. 2. Compressive strengths of specimens in all groups was tended to be also increased with time heated but that in group $50^{\circ}C$ and the maximum compressive strengths were showed in the same specimens conditioned as the diametral tensile strengths of four composite materials tested. 3. In Heliomolar, Litefil-P, and Bisfil-II, it was decreased in diameters of resin specimens between before heating and increased in diameters of resin specimens after storing in distilled water, but it was not in P-50. 4. There is little difference in diametral tensile strengths, compressive strengths, and dimensional changes followed by heating the resin specimens for 5 minutes and 10 minutes, but there is no statistical significances.

  • PDF

도시공원 자원봉사행동의 지속성 연구 -서울시 자원봉사단체를 사례로- (A Study on the Continuity of Volunteering in Urban Park)

  • 이준미;이규목
    • 한국조경학회지
    • /
    • 제32권2호
    • /
    • pp.1-10
    • /
    • 2004
  • Urban parks provide good services to the community, and they are enhanced by citizen participation. For that especially, organizational and continued volunteering can be a key strategy. The purpose of this study is to establish factors on promoting the continuity of volunteering in voulatary associations of urban parks. Variables of continuity are continual will, continual time, and psychological continuance motive. To add to this, this study is intended to inquiry about recognition and compensation that volunteers want to receive. The major findings are as follows: First, The main participantes were housewives with high education. Second, Continual will was influenced by gender, profession, the satisfactory degree for individual pursuit an ideal, and the degree of confidence with members. Third, Continual time was influenced by profession and individual network in community. Forth, Continual motive was influenced by individual network in community, the result-analysis behavior of related government organ, the degree of confidence and the degree of ties with members. Finally, Volunteers wanted to receive the volunteering expenses, the compensation about accident, and emotional recognitions. In sum : to ensure the continuity of volunteering, first, recruiting of volunteers is demanded to select a major target group in the community. Second, a voulatary association helps to make confidence and ties with members. Third, the related government organ strives for volunteers to have a positive recognition of the organ's attitudes, for the volunteer association to have a clearly distinguished area of action from the organ's one, and a co-operative system. Finally, an institution needs to be established to give emotional recognitions as well as volunteering expenses and acompensation for accidents.