• 제목/요약/키워드: Co-luminescence

검색결과 142건 처리시간 0.032초

High Performance 2.2 inch Full-Color AMOLED Display for Mobile Phone

  • Kim, H.K.;Suh, M.S.;Lee, K.S.;Eum, G.M.;Chung, J.T.;Oh, C.Y.;Kim, B.H.;Chung, H.K.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.325-328
    • /
    • 2002
  • We developed a high performance 2.2" active matrix OLED display for IMT-2000 mobile phone. Scan and Data driver circuits were integrated on the glass substrate, using low temperature poly-Si(LTPS) TFT CMOS technology. High efficiency EL materials were employed to the panel for low power consumption. Peak luminescence of the panel was higher than 250cd/$m^2$ with power consumption of 200mW.

  • PDF

Highly Luminescent (Zn0.6Sr0.3Mg0.1)2Ga2S5:Eu2+ Green Phosphors for a White Light-Emitting Diode

  • Jeong, Yong-Kwang;Cho, Dong-Hee;Kim, Kwang-Bok;Kang, Jun-Gill
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권8호
    • /
    • pp.2523-2528
    • /
    • 2012
  • Green phosphors $(Zn_{1-a-b}M_aM^{\prime}_b)_xGa_yS_{x+3y/2}:Eu^{2+}$ (M, M' = alkali earth ions) with x = 2 and y = 2-5 were prepared, starting from ZnO, MgO, $SrCO_3$, $Ga_2O_3$, $Eu_2O_3$, and S with a flux $NH_4F$ using a conventional solidstate reaction. A phosphor with the composition of $(Zn_{0.6}Sr_{0.3}Mg_{0.1})_2Ga_2S_5:Eu^{2+}$ produced the strongest luminescence at a 460-nm excitation. The observed XRD patterns indicated that the optimized phosphor consisted of two components: zinc thiogallate and zinc sulfide. The characteristic green luminescence of the $ZnS:Eu^{2+}$ component on excitation at 460 nm was attributed to the donor-acceptor ($D_{ZnGa_2S_4}-A_{ZnS}$) recombination in the hybrid boundary. The optimized green phosphor converted 17.9% of the absorbed blue light into luminescence. For the fabrication of light-emitting diode (LED), the optimized phosphor was coated with MgO using magnesium nitrate to overcome their weakness against moisture. The MgO-coated green phosphor was fabricated with a blue GaN LED, and the chromaticity index of the phosphor-cast LED (pc-LED) was investigated as a function of the wt % of the optimized phosphor. White LEDs were fabricated by pasting the optimized green (G) and the red (R) phosphors, and the commercial yellow (Y) phosphor on the blue chips. The three-band pc-WLED resulted in improved color rendering index (CRI) and corrected color temperature (CCT), compared with those of the two-band pc-WLED.

Fluorescent properties and synthesis of porphyrin square recognized methylene crown ether

  • Chang, Seung-Hyun;Kim, Jung-Sung
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2003년도 International Symposium on Clean Environment
    • /
    • pp.155-158
    • /
    • 2003
  • New porphyrin square (1) was prepared by reaction of porphyrin containing pyridine and Re$(CO)_5Cl$ in THF/toluene solvent. 2-(Methylene15-crown-5)-nicotinoly ester(2) was synthesized by reaction of 2-(Hydroxymethyl-15-crown-5 and nicotinoly chloride in $CH_2Cl_2$. In fluorescence quenching studies luminescence was quenched by addition of the guest(2) into host(l). In the host-guest system we could obtain binding constant (K= $1.13{\times}10^{7}M^{-1}$) at decreasing concentration of (2). But the luminescence was dramatically increased after $Na^{+}$ was added into the host-guest system.

  • PDF

Detection of Irradiated Korean Wheat Flour by Viscosity and Pulsed Photostimulated Luminescence (PPSL) Methods

  • Yi, Sang-Duk;Chang, Kyu-Seob;Oh, Man-Jin
    • Preventive Nutrition and Food Science
    • /
    • 제10권2호
    • /
    • pp.140-144
    • /
    • 2005
  • This study was carried out to establish methods for irradiation detection of irradiation in Korean wheat flour by pulsed photostimulated luminescence (PPSL) and viscometric methods. The photon counts of the irradiated Korean wheat flour measured by PPSL immediately after irradiation increased with increasing irradiation dose. The photon counts in the irradiated Korean wheat flour almost disappeared with lapse of time after storage in normal room conditions, but irradiation detection was still possible after 6 months in darkroom conditions. All irradiated samples indicated a decrease in viscosity with increasing stirring speeds (rpm) and irradiation doses. Irradiation at 1 kGy significantly decreased the viscosity. Consequently, these results suggest that the detection of irradiated Korean wheat powder is possible by both viscometric and PPSL methods.

A Study on Feasibility of Hexagonal Phase ZnS:$Mn^{2+}$ Phosphor for Low-voltage Display Applications

  • Shin, Sang-Hoon;Lee, Sang-Hyuk;You, Yong-Chan;Jung, Joa-Young;Park, Chang-Won;Chang, Dong-Sik
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.815-818
    • /
    • 2002
  • Mn doped hexagonal phase of ZnS has been studied as a yellow-orange phosphor for the application to fluorescent displays operated at low voltages. It was found that luminescence from $Mn^{2+}$ was increased as the Mn concentration was increased up to1.2 mol% of host lattice. This study has been attempted by adding trivalent ions such as $Al^{3+}$ or $Bi^{3+}$ to ZnS:Mn as an agent to do the efficient incorporation of Mn ions into ZnS:Mn lattice, resulting in a significant improvement in the phosphor performance, especially at low voltages.

  • PDF

Role of Redeposition of Sputtered Mg Particles in Image Sticking

  • Nikishin, Nikolay;Manakhov, Anton;Kim, Yoon-Kyung;Hur, Min;Heo, Eun-Gi
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.381-383
    • /
    • 2008
  • One of important factors responsible for image sticking in AC PDP is a sputtering of MgO layer under ionic bombardment. Sputtered Mg particles can migrate to the neighbor cells, where the migration makes a change of discharge condition. It leads to the local non-uniformity of a luminescence in the panel, resulting in the image sticking.

  • PDF

Optimization of the fabrication process using nanostructured carbon for low-cost FED application

  • Sun, Z.;Wang, L.L.;Chen, T.;Zhang, Z.J.;Cao, Z.Y.;Chen, Y.W.;Pan, L.K.;Feng, T.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.274-277
    • /
    • 2006
  • Nanostructured carbon (nm-C), including carbon nanotubes and nanofibers (CNTs/CNFs) is promising for low-cost field emission display (FED) application. By modification of CNTs/CNFs, uniform CNTs/CNFs can be obtained and used for field emission cathode (FEC) on glass substrate. By screen-printing (SP) and electrophoretic deposition (EPD) process, large area FEC can be obtained. The FED properties are studied and compared. Both SP and EPD FEC show excellent field emission properties, such as low emission field and uniform emission, after optimization the fabrication process. While EPD FEC exhibits better luminescence image. By vacuum sealing, the low cost nm-C-FED prototypes based on EPD cathode have been demonstrated.

  • PDF

DBD 플라즈마에 의한 연료개질 및 층류 화염 특성 변화 (The Effect of DBD Plasma on Fuel Reforming and on the Characteristics of Laminar Flames)

  • 김은강;박선호;송영훈;이원남
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.195-198
    • /
    • 2014
  • $Fuel/N_2$ and fuel/air mixtures were treated with non-thermal DBD plasma and the changes in characteristics of laminar diffusion flame have been observed. Flame of $Fuel/N_2$ mixture generated more soot under plasma condition while less amount of soot was formed from fuel/air mixture flame. Luminescence spectrum and gas chromatography results confirmed that plasma energy converts a fraction of fuel molecules into radicals, which then form $C_2$, $C_3$, $C_4$ and higher hydrocarbon under no oxygen condition or turn into CO, $CO_2$ and $H_2O$ when oxygen is present.

  • PDF

EL 시트 구동을 위한 인버터 설계 및 제어에 관한 연구 (A Study on Inverter Design and Control for Electro-Luminescence Sheet)

  • 이승요;강병희;고재석;김호진;신우석;최규하
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.550-552
    • /
    • 2008
  • 광고용 EL은 소형 띠(String)형태로 많이 사용되고 있으나, 제조기술의 발달로 면광원 형태로 제작되어 광고용으로 사용되기에 이르렀다. 면광원 EL은 부하 커패시턴스가 크고 구동 소음이 시트자체에서 발생한다는 문제가 있으므로 이를 분석하고 보완한 인버터의 설계가 필요하다. 본 논문에서는 EL특성을 분석하여 EL 시트 구동 인버터의 설계 및 제어에 대해 서술한다. 특히 부하 모델링을 통한 인버터의 토폴로지 선정 및 설계 파라미터를 구할 것이며 시뮬레이션 및 실험에 의해 그 특성을 검증한다.

  • PDF

Spectroscopic properties of Er3+/Yb3+ co-doped fluorophosphate glasses for NIR luminescence and optical temperature sensor applications

  • Linganna, K.;Agawane, G.L.;In, Jung-Hwan;Park, June;Choi, Ju H.
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제67권
    • /
    • pp.236-243
    • /
    • 2018
  • A series of $Er^{3+}/Yb^{3+}$ co-doped fluorophosphate glasses with varying $YbF_3$ concentration were prepared by a high temperature melt quenching technique. Absorption and emission cross-sections were determined by using the McCumber theory. The larger emission cross-section ($9.86{\times}10^{-21}cm^2$) and longer fluorescence lifetime (12.37 ms) were obtained for the $^4I_{13/2}{\rightarrow}^4I_{15/2}$ transition of ABS3Er4Yb glass. The sensitivity and temperature of the maximum sensitivity were evaluated by the fluorescence intensity ratio method from the measured upconversion spectra. The results were discussed and compared to the other reported glasses.