• 센서학회지
• /
• 제32권3호
• /
• pp.154-158
• /
• 2023

This study aimed to improve the moisture resistance of salt cores by investigating the suitability of a two-dimensional kaolinite colloidal solution and a commercially available SiO₂ ink solution as coating agents. X-ray diffraction analysis (XRD) results showed that the intercalation of urea into kaolinite did not significantly change its layer structure. Scanning electron microscopy (SEM) images revealed that the dip-coating only affected the surface of the salt core, and the texture of the surface is differ depending on the coating solution. The humidity absorption test results showed that both coatings reduced the hygroscopicity of the salt core by more than 50%. However, in the water-solubility test, the kaolinite dissolved with the salt core, whereas the SiO₂-coated salt core left a residue. These results strongly suggest that with the coating of the exfoliated kaolinite solution, salt core will remain stable in humid environments.

• 멤브레인
• /
• 제22권5호
• /
• pp.309-317
• /
• 2012

본 연구에서는 높은 투과도를 갖는 PTMSP에 1, 3, 5 wt% LDH 함량으로 용액 삽입법에 의하여 PTMSP/LDH 복합막을 제조하였다. 복합막의 물리화학적 특성은 FT-IR, TGA, XRD, UTM, SEM을 사용하여 조사하였고, $H_2$, $N_2$, $CO_2$ 기체에 대한 투과도와 선택도 성질을 고찰하였다. PTMSP/LDH 복합막의 기체 투과도는 LDH 함량이 증가함에 따라 감소하였고, $H_2$와 $CO_2$의 선택도는 LDH의 함량이 5 wt%일 때 최대값을 보였다. 그리고 PTMSP와 PTMSP/LDH 복합막은 기체투과 압력이 증가함에 따라 기체의 투과도가 증가하였다. PTMSP/LDH 복합막의 기체투과도는 PTMSP 막에 비해 압력 증가에 대한 차이가 다소 작게 나타났다.

• 공업화학
• /
• 제16권2호
• /
• pp.212-216
• /
• 2005

아연도금 강판의 부식을 방지하기 위하여, 방청제로서 사용하고 있는 벤조트리아졸을 유기화제로 사용하여 이를 Na-montmorillonite (Na-MMT)에 삽입시켰다. 이것을 XRD로 관찰한 결과 벤조트리아졸의 삽입으로 인하여 MMT의 층간 거리가 증가하였음을 보여주고 있다. 그리고 코팅액으로 사용하기 위하여 벤조트리아졸이 삽입된 MMT를 이용하여 수용성 poly(ethylene-co-acrylic acid) (PEA) 나노복합재료를 제조하였다. 나노복합재료는 PEA 매트릭스에 실리케이트가 단일층으로 잘분산되어 있는 박리형 나노복합재료임을 보여주고 있다. 이것을 인용하여 아연도금강판에 코팅하여 염소분무 시험한 결과 금속의 내식성을 현저히 증가시켰다. 이러한 결과는 PEA 매트릭스에 균일하게 분산되어 있는 실리케이트 층에 의한 산소투과도 감소와 방청제의 효과에 의한 것이다.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.507-512
• /
• 2003

The LiN $i_{l-y}$ $Co_{y}$ $O_2$ samples were synthesized at 80$0^{\circ}C$ and 85$0^{\circ}C$, by the solid-state reaction method, from the various starting materials LiOH, L $i_2$C $O_3$, NiO, NiC $O_3$, $Co_3$ $O_4$, CoC $O_3$, and their electrochemical properties are investigated. The LiN $i_{l-y}$ $Co_{y}$ $O_2$ pre-pared from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ exhibited the $\alpha$-NaFe $O_2$ structure of the rhombohedral system (space group; R3m). As the Co content increased, the lattice parameters a and c decreased. The reason is that the radius of Co ion is smaller than that of Ni ion. The increase in da shows that two-dimensional structure develops better as the Co content increases. The LiN $i_{0.7}$ $Co_{03}$. $O_2$［HOO(800,0.3)] synthesized at 80$0^{\circ}C$from LiOH, NiO, and $Co_3$ $O_4$ exhibited the largest first discharge capacity 162 mAh/g. The size of particles increases roughly as the valve of y increases. The samples with the larger particles have the larger first discharge capacities. The cycling performances of the samples with the first discharge capacity larger than 150 mAh/g were investigated. The LiN $i_{0.9}$ $Co_{0.1}$ $O_2$［COO(850,0.1)］ synthesized at 85$0^{\circ}C$ from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ showed an excellent cycling performance. The sample with the larger first discharge capacity will be under the more severe lattice destruction, due to the expansion and contraction of the lattice during intercalation and deintercalation, than the sample with the smaller first discharge capacity. As the first discharge capacity increases, the capacity fading rate thus increases.increases.s.s.s.

• 한국수산과학회지
• /
• 제51권1호
• /
• pp.15-22
• /
• 2018

Alpha-pinene is an organic compound that possesses antibiotic and anti-parasitic activities. In this study, we developed a layered nanocomposite to combat against Miamiensis avidus which causes scuticociliatosis in the olive flounder Paralichthys olivaceus. We used a solid-solid reaction to develop the layered nanocomposite, incorporating-pinene ($C_{10}H_{16}$) into organically modified montmorillonite. We used cetyltrimethylammonium cations as the interlayered modifier for the adsorption of hydrophobic pinene molecules. The X-ray diffraction patterns of the nanocomposite structure showed that the basal spacing increased from $9.6{\AA}$ to $30.4{\AA}$. Interestingly, the fraction of ${\alpha}$-pinene released remained constant for a long period of time (228 h) due to the layered nature of the nanocomposite. Additionally, optical microscopic images of the treated scuticociliatids revealed that their cells were lysed, and this effect increased with the increasing concertration of ${\alpha}$-pinene. Histopathological assessment of ${\alpha}$-pinene nanocomposite-treated olive flounder gills revealed no significant morphological changes, even at the highest concentration of the ${\alpha}$-pinene. The nanocomposite has several advantages, including easy handling, high solubility, low toxicity, and the easy formulation of granules or powder, which improve the pesticidal activity of ${\alpha}$-pinene. Collectively, our results suggest that ${\alpha}$-pinene nanocomposite may be a useful treatment against scuticociliatosis.

• 전기화학회지
• /
• 제1권1호
• /
• pp.14-17
• /
• 1998

MPCF는 Li ion 2차전지용 부극 활물질로 연구되고 있다. 흑연화 MPCF는 높은 방전 용량과 우수한 충방전 효율을 가진다. $0\~1$ V전위영역에서 25 mA/g의 정전류로 충방전할 때의 MPCF/Li전지의 초기 방전 용량은 300 mAh/g이며, 충방전 효율은 $90\%$ 이상을 나타낸다. $LiCoO_2$을 정극 활물질로, 혼합 탄소재료를 부극 활물질로 사용하여 원통형 Li ion 2차전지를 제작하였다. Li ion 2차전지의 수명 특성을 향상하기 위하여, 흑연화 MPCF에 이종 탄소 재료를 $10 wt\%$ 혼합하였다. 혼합 탄소재료를 사용한 Li ion 2차전지의 수명 성능은 흑연화 MPCF만을 사용한 전지보다 우수하였다.

• 공업화학
• /
• 제17권6호
• /
• pp.575-579
• /
• 2006

리튬의 삽입과 탈리가 가능한 탄소전극은 첫 싸이클 동안 카본전극 계면에 solid electrolyte interface가 형성된다. 초기 충전과정에서의 용매분해로 형성된 막은 전지의 성능에 영향을 미치게 되며, 이러한 용매분해는 초기 비가역 용량의 주된 요인중의 하나이다. 본 연구에서는 초기 비가역 반응을 억제하기위해 카본 표면 위에 부동태 막 형성을 위한 첨가제로서 $Li_{2}CO_{3}$을 사용하였다. $Li_{2}CO_{3}$ 첨가 효과를 시간대 전압법, 순환 전압-전류법, 그리고 임피던스법을 이용하여 조사하였고, 또한 SEM, EDX 그리고 XRD를 통해 표면 현상과 조성의 변화를 관찰하였다. 1 M $LiPF_{6}$/EC : MA (1 : 3, v/v) 전해질 용액에 $Li_{2}CO_{3}$의 첨가는 전극 표면에서의 용매분해 억제를 통하여 초기 비가역 용량을 감소시킴을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1669-1674
• /
• 2012

A novel superabsorbent composite was prepared by intercalation polymerization of acrylic acid (AA) and 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) in the presence of montmorillonite (MMT), using ammonium persulfate (APS) as an initiator and $N,N'$-methylenebisacrylamide (MBA) as a cross linker. The superabsorbent composite was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Maximum absorbency of the composite in distilled water and 0.9% sodium chloride solution was 722 and 108 g/g, respectively. The composite was used for removal of heavy metal ions from aqueous solutions. Maximum amount of adsorption for $Ni^{2+}$, $Cu^{2+}$ and $Pb^{2+}$ was 211.0, 159.6 and 1646.0 mg/g, respectively, and the adsorption was in accordance with both Langmuir and Freundlich model. The composite could be regenerated and reused in wastewater treatment.

• 대한화학회지
• /
• 제56권1호
• /
• pp.34-46
• /
• 2012

Dopants and defects can be introduced as well as the intercalation of metals into single wall carbon nanotubes (SWCNTs) to modify their electronic and magnetic properties, thus significantly widening their application areas. Through spinpolarized density functional theory (DFT) calculations, we have systemically studied the following: (i) (10,0) and (5,5) SWCNT doped with nitrogen ($CN_xNT$), (ii) (10,0) and (5,5) SWCNT with pyridine-like defects (3NV-$CN_xNT$), and (iii) chemical functionalization of (10,0) and (5,5) 3NV-$CN_xNT$ with 12 different transition metals (TMs) (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Pd, and Pt). Attention was done in searching for the most stable configurations, deformation, calculating the formation energies, and exploring the effects of the doping concentration of nitrogen and pyridine-like nitrogenated defects on the electronic properties of the nanotubes. Also, calculating the corresponding binding energies and effects of chemical functionalization of TMs on the electronic and magnetic properties of the nanotubes has been made. We found out that the electronic properties of SWCNT can be effectively modified in various ways, which are strongly dependent not only on the concentration of the adsorbed nitrogen but also to the configuration of the adsorbed nitrogen impurities, the pyridine-like nitrogenated defects, and the TMs absorbed; due to the strong interaction between the d orbitals of TMs and the p orbitals of N atoms, the binding strengths of TMs with the two 3NV-$CN_xNT$ are significantly enhanced when compared to the pure SWCNTs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.340-341
• /
• 2005

Lithium titanium oxide as anode material for energy storage prepared by novel synthesis method. $Li_4Ti_5O_{12}$ based spinel-framework structures are of great interest material for lithium-ion batteries. We describe here $Li_4Ti_5O_{12}$ a zero-strain insertion material was prepared by novel sol-gel method and by high energy ball milling (HEBM) of precursor to from nanocrystalline phases. According to the X-ray diffraction and scanning electron microscopy analysis, uniformly distributed $Li_4Ti_5O_{12}$ particles with grain sizes of 100nm were synthesized. Lithium cells, consisting of $Li_4Ti_5O_{12}$ anode and lithium cathode showed the 173 mAh/g in the range of 1.0 $\sim$ 3.0 V. Furthermore, the crystalline structure of $Li_4Ti_5O_{12}$ didn't transfer during the lithium intercalation and deintercalation process.