• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.69-74
• /
• 2001

In this Paper are described the indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20kHz to 50kHz. A specially designed induction heater, which is composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates, is inserted into the ceramic type vessel with external working coil. This working coil is connected to the inverter and turbulence fluid through this induction heater to moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1639-1641
• /
• 1997

In this study, We developed the 154kV optical fiber incorporated power cable which is combined optical fibers with conventional 154kV power cable. Also, we developed optical unit that optical fiber is inserted in stainless tube. The optical unit was tested, and we got good results enough to safe optical fibers. Also we put the optical fiber incorporated power cable to the test of electrical characteristics and optical characteristics, we knew that the electrical characteristics were the same characteristics as conventional 154kV power cable and the transmission loss change was almost zero. The method of optical unit connection was examined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.894-896
• /
• 2000

In this paper, we have designed the advanced DVT HLSM inserted a permanent magnet into the slot in order to improve the thrust force without increasing the normal force. And it was analyzed the characteristics of thrust force and normal force of the new HLSM by using Finite Element Method and Virtual Work Method. As a result of this paper it was confirmed that the thrust force characteristics of the new HLSM improved about 23% in comparision with DVT HLSM without increasing the normal force.

• Journal of Magnetics
• /
• 제3권3호
• /
• pp.69-73
• /
• 1998

A drum type magnetic separator was designed and optimized by computer simulation. The separator consisted of rotating outer shell of drum, magnetic flux generator drum which was assembled with numbers of disk type magnet holders, and drum axis around which the magnet holders were fixed. NdFeB magnet blocks were inserted into the disks, and the disks were assembled layer by layer along the drum axis. Magnetic circuits of the separator were simulated on the basis of highest magnetic strength, least cost, and high yield of separation by using a Vector Field S/W employing the Opera-2D program. The separator proved a separation yield of 95% in removing fine iron-base particles, and installed at Hot Rolling Mill of Pohang Iron & Steel Co. In Korea.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.483-486
• /
• 2001

This Paper the state-of-the art indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter whice can operate in the frequency range from 20kHz to 50kHz. A specially-designed induction heater composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates is inserted into the ceramic type vessel with external working coil connected to the inverter and tubelence fluid through this induction heater in moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2004년도 춘계학술발표대회
• /
• pp.249-249
• /
• 2004

This study was conducted to investigate optimal insemination timming as a scanning changes of follicular development by synchronization of ovulation(Ov-synch.) treatment for timed artificial insemination of deer. Sixty-nine elk does were inserted CIDR into virginia for 14 days from 16 to 29 September(breeding season). (omitted)

• 한국의학물리학회지:의학물리
• /
• 제8권1호
• /
• pp.37-45
• /
• 1997

차폐된 질 원주기구를 이용한 강내치료시 Co-60 선원에 대한 정확한 흡수선량을 결정 하고자 선원을 교정하고, 질 원주기구에 의한 선량분포변화를 조사하였다. 선량분포의 변화량은 직경 2.5 cm 차폐된 질 원주기구를 폴리스틸렌 팬톰에 설치하여 전리함으로 측정하였으며, 부채꼴 모양인 0.55cm 두께의 9$0^{\circ}C$ 연으로 차폐된 면과 차폐되지 않은 면의 선량분포에 대한 영향을 상대선량 감소율로 측정하였다. 측정된 선량분포의 변화량을 제작사의 선량분포도 및 다점 분할방식으로 구한 선량율표와 비교하였다. 질 원주기구를 이용한 선량 감소율은 차폐되지 않은 변의 경우 원주기구 표면 1cm 거리에서 4.4%를 보였고, 차폐된 면에서는 원주기구 표면에서 20.4% 를 나타냈다. 9$0^{\circ}C$연 차폐된 질 원주기구의 선량감쇄효율은 Co-60 선원에서 평균 0.2가 되었다. Co-60 이동형 선원의 선량분포는 다 점분할방식의 선량율표와 4.1% 이내로 일치하였다.

• 한국자기학회지
• /
• 제6권6호
• /
• pp.411-416
• /
• 1996

본 연구에서는 dc magnetron sputtering 방법으로 Corning glass 위에 자성층 Co와 비자성층 Cu의 계면에 얇은 Fe 자성층을 삽입하여 다층박막 $Fe(50\;{\AA})/[Co(17\;{\AA})/Fe(t\;{\AA})/Cu(24\;{\AA})]_{20}$을 제작하고 Fe 두께와 열처리 온도에 따른 자기저항 변화를 관찰하였다. 시료진동형자기계로 자기이력곡선을 측정하여 자기적 성질을 조사하였고 구조 및 표면 분석을 위해 각각 X-선 회절장치와 AFM(Atomic Force Microscope)을 이용하였다. 얇은 Fe 사이층을 삽입하지 않은 Co/Cu 다층박막에서 자기저항비가 22%인데 비해 얇은 Fe층을 삽입하였을때는 자기저항비가 26%까지 증가하였고 Fe 사이층의 두께가 점차 두꺼워짐에 따라 자기저항비는 다시 감소함을 나타냈다. $300^{\circ}C$ 까지 열처리한 결과 자기저항비는 증가하였으나 그 이상의 온도에서는 감소하였다.

• 한국자기학회지
• /
• 제13권5호
• /
• pp.187-192
• /
• 2003

IrMn에 Mn을 첨가시킨 N $i_{80}$F $e_{20}$/[I $r_{22}$M $n_{78}$-Mn] $Co_{75}$F $e_{25}$ 다층박막을 상온에서 이온빔 증착(ion beam deposition: IBD)법으로 제작하여 그 자기적 및 열적 특성을 연구하였다. Mn이 첨가된 NiFe/[IrMn-Mn]/CoFe다층박막은 Mn이 첨가되지 않은 순수 합금 IrMn 박막 위의 CoFe 고정층 보다 큰 교환결합력( $H_{ex}$)과 방해온도(blocking temperature: $T_{b}$)을 가지고 있었다. Mn이 첨가되지 않는 I $r_{22}$M $n_{78}$ 와 CoFe 사이의 $H_{ex}$는 상온에서 거의 없었으나, 25$0^{\circ}C$ 열처리 후 100 Oe로 나타났다. IrMn 내에서 76.8-78.1 vol% Mn일 때, $H_{ex}$와 $T_{b}$는 크게 향상되었고, Mn이 0.6 vol%씩 증가함에 따라 크게 줄어들었다. NiFe/[IrMn-Mn]/CoFe 다층박막 구조에서 [(111)CoFe, NiFe]/(111)IrM $n_3$인 x-선 회절 피크비 평균값은 75.5, 77.5, 79.3 vol% Mn일 때 각각 1.4, 0.8, 0.6였다. 특히, 열처리 전 77.5과 78.7 vol% Mn일 때, $H_{ex}$는 각각 259와 150 Oe였다. 77.5 vol% Mn인 경우, $H_{ex}$가 열처리 온도 35$0^{\circ}C$까지 475 Oe였으며, 450 $^{\circ}C$에서는 200 Oe로 크게 감소하였다. 따라서 합금형 반강자성체 IrMn에서 높은 $H_{ex}$와 $T_{b}$을 얻을 수 있는 최적의 Mn 함유량의 존재를 확인하였다.다.다. 확인하였다.다.하였다.다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권8호
• /
• pp.3627-3630
• /
• 2012

The epithelial cell adhesion molecule (EpCAM) is a pan-epithelial differentiation antigen that is expressed on almost all carcinomas. However, a role in rat liver carcinogenesis has never been reported previously. Thus, its expression was investigated herein in rat liver tumors induced by diethylnitrosamine (DEN). Twenty male 5-week-old F344 rats were used in this experiment. Mini-osmotic pumps containing doses of 47.5 mg of DEN were inserted into the abdominal cavity of each animal to initiate liver carcinogenesis. All animals were sacrificed at 26 weeks after DEN treatment. At necropsy, hepatic masses were processed for histopathological examination, which revealed forty-four hepatocellular adenomas (HCAs) and twenty hepatocellular carcinomas (HCC). Tumors were immunohistochemically analyzed for EpCAM, proliferating cell nuclear antigen (PCNA) and co-localization of the two. EpCAM expression was mainly detected in hepatic tumor cells, showing a cytoplasmic staining pattern. However, expression was also slightly observed in normally-appearing surrounding hepatic cells. PCNA expression was highly detected in tumor cells, showing nuclear staining. Double staining of EpCAM and PCNA in tumors showed many cells with co-localization. Taken together, EpCAM and PCNA expression were increased in DEN-induced tumors and many tumor cells showed co-expression. It is suggested that EpCAM may increase during DEN-induced tumors, possibly associated with cell proliferation.