• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.453-456
• /
• 2011

An experimental investigation of the heat transfer characteristics of stretched premixed flames using Synthetic gas has been performed. Hydrogen and carbon mon-oxide which could be extracted from coal gasification process are the main fuel of synthetic-gas. Heat flux at the stagnation point was increased as global strainrate was increased, then the heat flux was decreased when a global strainrate reached a sudden point. Heat flux at the stagnation point is also affected by nozzle to impingement distance. Heat flux was increased as nozzle to impingement place distance was increased. This study is a foundation study of practical use of secondary gases from coals.

• Nuclear Engineering and Technology
• /
• v.45 no.2
• /
• pp.211-218
• /
• 2013

Large quantities of irradiated graphite waste from graphite-moderated nuclear reactors exist and are expected to increase in the case of High Temperature Reactor (HTR) deployment [1,2]. This situation indicates the need for a graphite waste management strategy. Of greatest concern for long-term disposal of irradiated graphite is carbon-14 ($^{14}C$), with a half-life of 5730 years. Fachinger et al. [2] have demonstrated that thermal treatment of irradiated graphite removes a significant fraction of the $^{14}C$, which tends to be concentrated on the graphite surface. During thermal treatment, graphite surface carbon atoms interact with naturally adsorbed oxygen complexes to create $CO_x$ gases, i.e. "gasify" graphite. The effectiveness of this process is highly dependent on the availability of adsorbed oxygen compounds. The quantity and form of adsorbed oxygen complexes in pre- and post-irradiated graphite were studied using Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Xray Photoelectron Spectroscopy (XPS) in an effort to better understand the gasification process and to apply that understanding to process optimization. Adsorbed oxygen fragments were detected on both irradiated and unirradiated graphite; however, carbon-oxygen bonds were identified only on the irradiated material. This difference is likely due to a large number of carbon active sites associated with the higher lattice disorder resulting from irradiation. Results of XPS analysis also indicated the potential bonding structures of the oxygen fragments removed during surface impingement. Ester- and carboxyl-like structures were predominant among the identified oxygen-containing fragments. The indicated structures are consistent with those characterized by Fanning and Vannice [3] and later incorporated into an oxidation kinetics model by El-Genk and Tournier [4]. Based on the predicted desorption mechanisms of carbon oxides from the identified compounds, it is expected that a majority of the graphite should gasify as carbon monoxide (CO) rather than carbon dioxide ($CO_2$). Therefore, to optimize the efficiency of thermal treatment the graphite should be heated to temperatures above the surface decomposition temperature increasing the evolution of CO [4].

• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.35-45
• /
• 2023

Global efforts are focused on achieving carbon neutrality due to the increases in the levels of greenhouse gases. Moreover, the greenhouse gases generated from the disposal of municipal solid waste (MSW) are the primary sources of emissions in South Korea. In this study, we conducted the biological conversion of syngas (CO, H₂, and CO₂) generated from MSW gasification. The MSW-derived syngas was used as a feed source for cultivating Eubacterium limosum KIST612, and pressurization was employed to enhance gas solubility in culture broth. However, the pH of the medium decreased owing to the pressurization because of the CO₂ in the syngas and the cultivation-associated organic acid production. The replacement of conventional HEPES buffer with a phosphate buffer led to an approximately 2.5-fold increase in acetic acid concentration. Furthermore, compared with the control group, the pressurized reactor exhibited a maximum 8.28-fold increase in the CO consumption rate and a 3.8-fold increase in the H2 consumption rate.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.221-227
• /
• 2010

In this study, we consider gas generation characteristics on pyrolysis of eco-fuel which were made by mixing of Pitch Pine and Lauan sawdust as biomass and polyethylene, polypropylene, polystyrene as municipal plastic wastes with catalyst in fixed bed reactor. From the result of higher heating value(HHV) measurement and of ultimate analysis, the heating value of plastic wastes and a hydrogen content in plastic sample are higher than biomass. An activation energy was reduced by a catalyst addition. However the catalyst content influence over 5 wt% was insignificant. The yield of hydrogen from gasification of biomass containing plastic wastes such as polyethylene, polypropylene and polystyrene were obtained higher than that of sole biomass. The high temperature and mixture ratio of catalyst conditions induced to high hydrogen yield in most of the samples. As the influence of catalyst, the hydrogen yield by catalytic reaction was higher than non-catalytic reaction. We confirmed that Ni-$ZrO_2$ catalyst is more active in increasing the hydrogen yield in comparison with that of carbonate catalyst. The maximum hydrogen yield was 65.9 vol.%(Pitch Pine / polypropylene / 20 wt.% Ni-$ZrO_2$(1:9) at $900^{\circ}C$).

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.215-220
• /
• 2010

Hydrogen is a clean and efficient energy source and is expected to take an important role in future energy demand. A possibly good route to produce hydrogen is by using biomass and organic wastes as a source through thermo-chemical conversion technology. In this study, pyrolysis of wood Pellet(Oregon pine) has been carried out in batch type fixed-bed reactor in $N_2$ atmosphere during 20 minutes to determine the optimum hydrogen generating conditions. At the influence of temperature, hydrogen yield was increased with increasing temperature. For the influence of Steam/Biomass Ratio(SBR), hydrogen yield was increased by steam addition at low temperature condition. However, effect of steam addition was insignificant over at SBR = 1. The hydrogen yield was increased with increasing SBR at high temperature condition. From result of $H_2$/CO and $H_2/CH_4$ ratio, dominant reaction was steam reforming in this experimental condition. The optimum condition for hydrogen production was determined as follows: $H_2$ yield = 38.3 vol.% (56.01 L/min kg) at $900^{\circ}C$, SBR=3.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.639-648
• /
• 2013

This paper describes on the NOx/CO emission characteristics, temperature characteristics and flame structures when firing coal derived synthetic gas especially for gases of Buggenum and Taean IGCC. These combustion characteristics were observed by conducting ambient-pressure elevated-temperature combustion tests in GE7EA model combustor when varying heat input and nitrogen dilution ratio. Nitrogen addition caused decrement in adiabatic flame temperature, thus resulting in the NOx reduction. At low heat input condition, nitrogen dilution raised the CO emission dramatically due to incomplete combustion. These NOx reduction and CO arising phenomena were observed at certain flame temperature of $1500^{\circ}C$ and $1250^{\circ}C$, respectively. As increasing nitrogen dilution, adiabatic flame temperature and combustor liner temperature were decreased and singular points were detected due to change in flame structure such as flame lifting. From the results, the effect of nitrogen dilution on the NOx/CO and flame structure was examined, and the test data will be utilized as a reference to achieve optimal operating condition of the Taean IGCC demonstration plant.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.34-40
• /
• 2006

This paper provides a fusion technology between a district cooling energy system and an environment conservation policy based on the energy savings and reusable cold energy resources. The district heating and cooling systems are very effective ways for an energy saving, a cost reduction and a safety control. It is necessary to equalize the energy savings and an environmental preservation policy for an improved human lift. A gasification process of a liquefied natural gas, cooling water from deep seawater and an ice water thermal storage system may produce a cold energy. A district cooling system is used to cool an apartment, office buildings and factory facilities with a cooling energy supply pipeline. LNG cooling energy will switch a conventional air-conditioning system, which is operated by on electrical energy and a Freon refrigerant. Coincident with significant clean energy and operating cost savings, LNG cold energy system owen radical reductions in an air-borne pollutant, $CO_2$ and the release of environmentally harmful refrigerants compared with that of the conventional air-conditioning system. This study provides useful information on the fusion technology of a LNG cold energy usage and energy savings, and environmental conservation.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.3
• /
• pp.15-20
• /
• 2012

Processing of organic waste is converted to anaerobic digestion for environmental friendly and sustainable energy recovery and reduction of sludge. In this study, ECOPAD (ECOdays' Plug-flow Anaerobic Digster)design for a high solids content and high organic matter content were used to investigate an applicability and efficiency of food waste treatment and poultry wastewater treatment. Case-by-case analysis of treatment efficiency of ECOPAD using food waste of city "P" and city "S". Volatile Solids basis organic removal efficiency of city "P" and city "S" was 84% and 88% respectively. And, the content of methane (P City: 70%, S City: 71%) was measured similarly. In the case of poultry waste bio-gas production was measured to $1.6Nm^3/kg$-VSrem, and methane content was measured to 69%.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2010.04a
• /
• pp.188-188
• /
• 2010

수소 에너지는 화석연료의 한정된 매장량과 연소시 발생되는 환경문제를 해결하기 위해 가장 이상적인 대체에너지로서 주목을 받고 있다. 그러나 현재까지의 기술로는 경제성 있는 수소 제조가 쉽지 않다. 그 방법 중 바이오매스 및 유기성폐기물의 가스화를 통한 수소제조분야는 자원의 재순환, 페기물 처리, 열원의 이용, 직접적인 $CO_2$ 삭감 등의 부수적인 효과가 높아 경제성 있는 수소제조법으로 평가되고 있다. 이에 본 연구에서는 수소 생산을 목적으로 하는 가스화기와 초고온개질기로 구성된 Twin-Bed 가스화 시스템을 개발하고, 이를 이용한 Wood pellet(미송)의 가스화 특성 및 생성 가스의 초고온개질 특성을 고찰하는 것을 목적으로 한다. 가스화기의 시간변화에 따른 생성 가스 수율에 대한 결과, 생성 가스 수율은 약 20분경과 후 안정화되었으며, 실험 2시간 동안의 $H_2,\;CH_4,\;CO,\;CO_2$의 평균 수율은 각각 17.77, 11.94, 42.13, 28.16 Vol.%의 결과를 보였다. 가스화기로부터 생성된 가스는 down-draft 형태의 고온개질기로 도입시켜, $1100^{\circ}C$의 초고온에서 개질반응을 수행하였다. $CH_4$의 경우 11.95 Vol.%에서 0 Vol.%로 거의 대부분 분해되었으며, $H_2$는 17.77 Vol.%에서 25.46 Vol.%로 약 65.8% 증가하는 결과를 나타냈다. 또한 수소 생성량은 평균 5 L/min kg-Biomass이었다. 냉가스 효율은 72.1%로서 나타나, 일반적으로 폐기물의 냉가스 효율인 약 50% 전후의 결과에 비하여 높은 효율을 보였다.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.77-86
• /
• 1997

In this study, numerical computations were performed to scrutinize the effect of the size of coal particles on reactive flow fields and concentration distribution of product gases for five cases with four different particle sizes (40 $\mu\textrm{m}$, 60 $\mu\textrm{m}$, 100 $\mu\textrm{m}$, 120 $\mu\textrm{m}$, 140 $\mu\textrm{m}$) in an axisymmetric cylindrical coal gasifier in which Alaska Usibelli subbituminous coals were gasified. Predictions showed that coal particle size affected the concentration distribution of product gases. When coals of 100 $\mu\textrm{m}$ were gasified, the maximum average concentrations of major products, H$_2$and CO, were predicted at the exit of the gasifier. The average mole fractions of CO and H, were shown to be 0.62, and 0.16 (dry basis, inert free), respectively. The cold gas efficiency of 83% was also predicted for the same particle size of 100 $\mu\textrm{m}$.