• Korean Journal of Ecology and Environment
• /
• v.47 no.2
• /
• pp.82-90
• /
• 2014

To assess the adverse effects of suspended solids on fishes, the hatching rate of embryo, and survival and growth of larvae were measured with common fish species of river such as crusian carp (Carassius auratus), common carp (Cyprinus carpio) and medaka (Oryzias latipes). Bioassay on hatching rate of embryo was conducted with a range of turbidity as 10 levels from 0.2 to 8,080 NTU. Another bioassay on 4-day larval survival and 21-day larval growth were also conducted with a range of turbidity as 8 levels from 0.1 to 8,260 NTU, and 6 levels from 0.7 to 2,030 NTU, respectively. The hatching rate of C. auratus was not significantly different from that of control at turbidity below 4,040 NTU, whereas it decreased when turbidity was 8,080 NTU (p<0.05). The hatching rate of C. carpio was not affected by concentration of suspended solids. For O. latipes, the hatching rate significantly decreased from 254 NTU (p<0.001) and it was zero when turbidity was 8,080 NTU. The 4-day survival of larvae of all 3 species was not affected by turbidity, while the larval growth of all 3 species was significantly affected. The turbidity effect on the growth of C. auratus and C. carpio was observed from 7 days after the exposure at turbidity level of 145, 143 NTU, respectively. The turbidity effect on the growth of O. latipes was observed from 14 days after the exposure at turbidity level of 254 NTU. The results of this study will provide the basic information for the derivation of water quality criteria on suspended solids for the protection of aquatic ecosystem and the quantitative ecological risk assessment of freshwater environment.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.307-319
• /
• 2009

Carbon dioxide capture and storage (CCS) technology has been regarded as one of the most possible and practical option to reduce the emission of carbon dioxide ($CO_2$) and consequently to mitigate the climate change. Korean government also have started a 10-year R&D project on $CO_2$ storage in sea-bed geological structure including gas field and deep saline aquifer since 2005. Various relevant researches are carried out to cover the initial survey of suitable geological structure storage site, monitoring of the stored $CO_2$ behavior, basic design of $CO_2$ transport and storage process and the risk assessment and management related to $CO_2$ leakage from engineered and geological processes. Leakage of $CO_2$ to the marine environment can change the chemistry of seawater including the pH and carbonate composition and also influence adversely on the diverse living organisms in ecosystems. Recently, IMO (International Maritime Organization) have developed the risk assessment and management framework for the $CO_2$ sequestration in sub-seabed geological structures (CS-SSGS) and considered the sequestration as a waste management option to mitigate greenhouse gas emissions. This framework for CS-SSGS aims to provide generic guidance to the Contracting Parties to the London Convention and Protocol, in order to characterize the risks to the marine environment from CS-SSGS on a site-specific basis and also to collect the necessary information to develop a management strategy to address uncertainties and any residual risks. The environmental risk assessment (ERA) plan for $CO_2$ storage work should include site selection and characterization, exposure assessment with probable leak scenario, risk assessment from direct and in-direct impact to the living organisms and risk management strategy. Domestic trial of the $CO_2$ capture and sequestration in to the marine geologic formation also should be accomplished through risk management with specified ERA approaches based on the IMO framework. The risk assessment procedure for $CO_2$ marine storage should contain the following components; 1) prediction of leakage probabilities with the reliable leakage scenarios from both engineered and geological part, 2) understanding on physio-chemical fate of $CO_2$ in marine environment especially for the candidate sites, 3) exposure assessment methods for various receptors in marine environments, 4) database production on the toxic effect of $CO_2$ to the ecologically and economically important species, and finally 5) development of surveillance procedures on the environmental changes with adequate monitoring techniques.

• Molecules and Cells
• /
• v.26 no.5
• /
• pp.486-489
• /
• 2008

Curcumin (diferuloylmethane), a pigment derived from turmeric, has anti-oxidant and anti-inflammatory activities. Accumulating evidence points to a biochemical link between increased oxidative stress and reduced bone density. Osteoclast formation was evaluated in co-cultures of bone marrow stromal cells (BMSC) and whole bone marrow cells (BMC). Expression of receptor activator of nuclear factor-${\kappa}B$ ligand (RANKL) was analyzed at the mRNA and protein levels. Exposure to curcumin led to dose-dependent suppression of osteoclastogenesis in the co-culture system, and to reduced expression of RANKL in $IL-1{\alpha}$-stimulated BMSCs. Addition of RANKL abolished the inhibition of osteoclastogenesis by curcumin, whereas the addition of prostaglandin $E_2$ ($PGE_2$) did not. The decreased osteoclastogenesis induced by curcumin may reduce bone loss and be of potential benefit in preventing and/or attenuating osteoporosis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.281-284
• /
• 2004

Photo-induced memory effect of an organic light-emitting diode(OLED) composed of a hydrazone-derivative(DBAH) dispersed in bis-phenol-A type polycarbonate polymer(PCA) in the presence of thio-Michler's ketone, was investigated by the measuring of the current density and luminance at the various conditions. After the light exposure, the current of the OLED was decreased approximately one order, and the luminance of the OLED also decresed. This memory effct was erasable by heating the OLED to the temperature higher than the glass transition temperature(Tg). As shown in this result, we found the memory effect was erased by heating and returned to its original state in the hole injecting layer(HIL) of the OLED. A series of these phenomena was suggested the possibility of the application to the imaging plate.

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.121-124
• /
• 2011

The mechanism for lattice-shaped mura defects was proposed by characterizing the electro-optic properties of liquid crystal (LC), which showed different transmission properties between the normal and mura defect areas. An increase in the mura defect rate was observed when the dotted LC in the one drop filling (ODF) was exposed for a longer time. The dotted LC droplet at the edge evaporated more rapidly than that in the center. This resulted in a higher concentration of polar singles at the edge of the dotted LC droplet, leading to a higher ${\Delta}n$ value and higher transmittance. This implies that the reductio of the exposure time of the dotted LC to air plays a critical role in decreasing the occurrence of lattice-shaped mura defects in ODF.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.181-185
• /
• 2000

A new technique capable of accelerating the crystallization of ferrite powder at low temperature is developed. Effects of the ultrasonic waves on the crystallization were studied for ferrite powders prepared using the co-precipitation method. The crystallization of the ferrite powders exposed to the ultrasonic waves were characterized by the XRD. The amorphous ferrite powders prepared using the co-precipitation method were crystallized as a result of the exposure to the ultrasonic waves for 5h and the crystallization of the ferrite powders became more enhanced in proportion to the time exposed. The ferrite powder exposed to the ultrasonic waves for 25h had higher crystallinity a larger specific surface area than the ferrite powder calcined at 500$^{\circ}C$ for 2h.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.4
• /
• pp.296-300
• /
• 2017

NiO nanofibers with Au nanoparticles were synthesized by sol-gel and electrospinning techniques, in which the reduction process by ultraviolet exposure is included for the growth of Au nanoparticles in the electrospinning solution. FE-SEM(Field Emission Scanning Electron Microscopy), TEM(Transmission Electron Microscopy) revealed that the synthesized nanofibers had the diameter of approximately 200 nm. X-ray diffraction showed the successful formation of Au-decorated NiO nanofibers. Gas sensing tests of Au-decorated NiO nanofibers were performed using reducing gases of CO, and $C_6H_6$, $C_7H_8$, $C_2H_5OH$. Compared to as-synthesized NiO nanofibers, the response of Au-loaded NiO nanofibers to CO gas was found to be about 3.4 times increased. On the other hand, the response increases were only 1.1-1.3 times for $C_6H_6$, $C_7H_8$, and $C_2H_5OH$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.89-90
• /
• 2018

In recent years, harmful substances and fine dust in the air are caused by respiratory and cardiovascular diseases through various mechanisms when they are introduced into the human body through respiration, thereby exacerbating human health and causing cancer by prolonged exposure do. In order to prevent such fine dust from being introduced into the room and to improve indoor air quality, improvement of air quality has attracted attention. Among indoor air pollutants, fine dust and CO₂ are pollutants that are directly affected by indoor number and activity. The purpose of this study is to evaluate the basic performance of cement matrix using photosynthetic bacteria as a basic study of fine dust and CO₂ adsorption type matrix to suppress indoor air pollution and improve air quality.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.2
• /
• pp.143-148
• /
• 1995

Ketene (CH2CO) adsorption on Ag(111) has been studied in ultrahigh vacuum using electron energy loss spectroscopy and temperature programmed desorption. Ketene adsorbs molecularly on Ag(111) at temperatures below 126 K. The coverage increases linearly with exposure until saturation. No multilayer formation and no shift in desorption temperature with coverage were observed, indicating a lack of attractive interaction between adsorbate molecules. The desorption activation energy is estimated to be 7.8 kcal/mol by assuming first order kinetics and a pre-exponential factor of 1013 sec-1. The adsorption geometry of ketene on the surface is determined from the relative intensities of the vibrational energy loss peaks. The CCO axis of CH2CO is found to be almost parallel to (∼4°away from) the surface and the molecular plane is almost perpendicular to the surface (∼3°tilt).

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1634-1641
• /
• 2021

Exposure to gamma-rays is hazardous for humans and other living beings because of their high penetration through the materials. For this reason, shielding materials (usually lead, copper and stainless steel) are used to protect against gamma rays. This study's objective was to prepare ceramic materials for gamma radiation shielding by using different natural bentonite clays. Gamma-ray attenuation performances of the prepared shielding materials at different thicknesses were investigated and evaluated for different gamma-ray energies from different standard point gamma radiation sources (²⁵¹Am, ⁵⁷Co, ¹³⁷Cs, ⁶⁰Co, and ⁸⁸Y). The mass and linear attenuation coefficients of the prepared ceramics vary between 0.238 and 0.443 cm² g^-1 and between 0.479 and 1.06 cm^-1, respectively, depending on their thicknesses. Results showed that these materials could be prioritized because of their evidential properties of gamma radiation protection in radiation applications.