• Journal of Radiation Protection and Research
• /
• v.40 no.1
• /
• pp.25-35
• /
• 2015

We analyzed the differential effects of histopathology, apoptosis and expression of radiation response genes after chronic low dose rate (LDR) and acute high dose rate (HDR) radiation exposure in spleen, lung and liver of rats. Female 6-week-old Sprague-Dawley rats were used. For chronic low-dose whole body irradiation, rats were maintained for 14 days in a $^{60}Co$ gamma ray irradiated room and received a cumulative dose of 2 Gy or 5 Gy. Rats in the acute whole body exposure group were exposed to an equal dose of radiation delivered as a single pulse ($^{137}Cs$-gamma). At 24 hours after exposure, spleen, lung and liver tissues were extracted for histopathologic examination, western blotting and RT-PCR analysis. 1. The spleen showed the most dramatic differential response to acute and chronic exposure, with the induction of substantial tissue damage by HDR but not by LDR radiation. Effects of LDR radiation on the lung were only apparent at the higher dose (5 Gy), but not at lower dose (2 Gy). In the liver, HDR and LDR exposure induced a similar damage response at both doses. RT-PCR analysis identified cyclin G1 as a LDR-responsive gene in the spleen of rats exposed to 2 Gy and 5 Gy gamma radiation and in the lung of animals irradiated with 5 Gy. 2. The effects of LDR radiation differed among lung, liver, and spleen tissues. The spleen showed the greatest differential effect between HDR and LDR. The response to LDR radiation may involve expression of cyclin G1.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.869-873
• /
• 2014

Cardiorespiratory variables were measured in flounder Paralicthys olivaceus exposed to acidified seawater equilibrated with a gas mixture containing 5% $CO_2$ gas for 72 h at $20^{\circ}C$. It was found that $CO_2$ produced a significant increase in arterial $PCO_2$ ($PaCO_2$) and significant decreases in arterial pH (pHa). $CO_2$ transiently increased heart rate within 30 min of exposure. After cardiac output was elevated by the increase in heart rate within 30 min, was then reduced by the decrease in both stroke volume and heart rate. The heart responses of flounder differ from those of yellowtail to high $CO_2$ environment.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.2
• /
• pp.621-626
• /
• 2015

Background: Smokefree laws aim to protect employees and the public from the dangers of secondhand smoke. Waterpipe premises have significantly increased in number in the last decade, with anecdotal reports of poor compliance with the smokefree law. The literature is bereft of information pertaining to waterpipe premise employees. This study aimed to opportunistically gather knowledge about the occupational health hazards associated with working in waterpipe premises in London, England. Materials and Methods: Employees from seven convenience-sampled, smokefree-compliant waterpipe premises in London were observed for occupational activities. Opportunistic carbon monoxide (CO) measurements were made among those with whom a rapport had developed. Observations were thematically coded and analysed. Results: Occupational hazards mainly included environmental smoke exposure. Waterpipe-serving employees were required to draw several puffs soon after igniting the coals, thereby providing quality assurance of the product. Median CO levels were 27.5ppm (range 21-55ppm) among these employees. Self-reported employee health was poor, with some suggestion that working patterns and smoke exposure was a contributory factor. Conclusions: The smokefree law in England does not appear to protect waterpipe premise employees from high levels of CO. Continued concerns surrounding chronic smoke exposure may contribute to poor self-reported physical and mental wellbeing.

• Biomedical Science Letters
• /
• v.14 no.3
• /
• pp.173-178
• /
• 2008

With the widespread use of laser in medical and industrial settings, the incidence of laser injury to the ocular continues to grow among workers involved in handling lasers. The aim of this study is to compare ocular damages after irradiation with various laser wavelengths and power density. Ocular of pigmented rats was irradiated with $CO_2$ laser, 1064 nm Nd:YAG laser, and 532 nm diode laser. We observed damage of cornea, lens, and retina using slit lamp microscope and funduscopy. H&E staining of histopathology were applied to study the specimens. The higher exposure ($200mW/cm^2$, 10 sec) with $CO_2$ laser resulted in severe damage at the cornea. For the 1064 nm Nd:YAG laser, the higher exposure than $10mW/cm^2$ (10 sec) resulted in damage at the cornea and lens. Further, with the 532 nm diode laser, retinal lesions were induced when $10mW/cm^2$ (0.25 sec) was delivered to the eye. Theses results suggest that the ocular damages are different from various laser wavelength and power density.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.188-197
• /
• 2016

Objectives: The purpose of this study was to evaluate the ozone exposure levels and the variations in ozone concentration in a semiconductor fabrication facility and office in relation to the ozone concentration in the outdoor air. Methods: This study was performed in an office, semiconductor fabrication facility(such as etching, diffusion, diffusion plenum), and outdoors from June to August, 2015. Measurements were taken six times at the same places using an active sampler(pumped) and real-time equipment. Ozone monitoring by the active sampler method and analysis were carried out by OSHA Method ID-214. Real-time measurement was carried out by ozone measuring equipment using a non-dispersive ultraviolet absorption method. Results: Ozone concentrations in the semiconductor fabrication facility and office were 0.7~7.1 ppb in area samples and 0.72~4.07 ppb in real-time measurement, which were 0.88~8.88% of the occupational exposure limit. The concentration of ozone generated by a laser printer in the office was less than 2 ppb. There was not a significant difference between ozone concentrations before and after using the laser printer. The indoor/outdoor concentration ratio(I/O ratio) in the semiconductor fabrication facility and office was 0.05 and 0.06, respectively. Conclusions: All the samples contained ozone levels lower than the occupational exposure limit and it was confirmed that the concentration of outdoor ozone had no significant effect on indoor ozone concentration.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.145-154
• /
• 2003

By optimizing the radiation protection the collective dose and individual dose could be reduced during YGN #4 $5^{th}$ outage in 2001. The collective doses for the two high radiation jobs decreased to 85% and 65% of expected doses. The proportion of workers with low dose (below 1mSv) exposure increased 4% while the proportion of workers with over 3mSv and 5mSv exposure are decreased to 2%, 1% respectively. But none is exposed over 8mSv for the annual dose. To aid decision of utilizing the robot, cost- benefit analysis was performed and reasonable point was proposed to use the robot. For the first time job, repeated ALARA meeting and mock up training were implemented to set up working procedure by identifying the trouble. To easily set up standard procedure, mockup process was videotaped and reviewed during ALARA meeting. Monitoring is a good approach to chase radiological working condition such as working time, dose rate. behavior of workers, especially for high radiation work. Those data were estimated and adjusted from the stage of work planning to mock up. At the stage of actual work the monitoring data were compared to the estimation and recorded to database. This database will not only be used as a powerful tool for dose optimization at the following outage but also as a guideline to dose constraint set up for optimization for each specific situation.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.10-19
• /
• 2023

Fall accidents account for the highest accident fatality rate in the construction industry. In addition, wearing and using a safety belt is the most realistic and important preventive measure to reduce fall accidents. Safety belts are protective devices worn by individual workers; they prevent workers from falling and allow for time to rescue the workers. However, the legal standards for safety belts only stipulate the materials, specifications, and strength of parts; there is no provision for an auxiliary rope fixing method to fix the safety belts safely. Due to this reason, workers in industrial sites arbitrarily fix and use the auxiliary rope. Currently, the most used method to fix the auxiliary rope is to tie a knot, which significantly lowers the strength of the material compared to the standard strength. Moreover, many construction sites are located outdoors, so the strength of the materials used in the auxiliary rope is inevitably reduced due to various external environmental conditions. Therefore, to solve this problem, this study was conducted to evaluate the strength of the material of the auxiliary rope for fixing the safety belt and the knot-tying method for the auxiliary rope. In this study, the exposure conditions for the effects of temperature and moisture were set to reflect the characteristics of the construction industry. The results of this study are expected to be used for standards establishment and the safe use of the auxiliary rope for safety belts in actual field applications.

• Corrosion Science and Technology
• /
• v.2 no.5
• /
• pp.207-211
• /
• 2003

The weather resistance of five coatings systems based on alkyd, chlorinated rubber, epoxy, polyurethane and fluoropolymer were studied by natural exposure test and accelerated test. The coatings were exposed at Hanoi station with urban industry atmosphere and at Baichay station with marine atmosphere. The degradation of coatings was evaluated by gloss measurement and surface analysis by scanning electronic microscopy. The results obtained show that among coatings tested the gloss of polyurethane and fluoropolymer coatings remained highly and those of alkyd, chlorinated rubber and epoxy coatings were very low after two years of atmospheric exposure. Under accelerating conditions the gloss of fluoropolymer coatings remained highly after 80 cycles of testing. By comparison with accelerating test in UV-condensation chamber the conditions at atmospheric stations are more aggressive.

• Environmental Analysis Health and Toxicology
• /
• v.24 no.4
• /
• pp.311-320
• /
• 2009

The short term (24-hr) and long term (21 days) effects of copper, cadmium, fenbendazole and sulfathiazole on the survival of the Korean fairy shrimp Branchinella kugenumaensis were evaluated. The 24-hr median lethal concentrations ($LC_{50}$) of copper, cadmium, fenbendazole, and sulfathiazole were 39, 512, 182, and 31,818 ${\mu}g/L$, respectively. The toxicity of copper is highest among 4 chemicals used in this study, while sulfathazole the lowest. After the long term (21 days) exposure experiment, the $LC_{50}$ copper, cadmium, fenbendazole, and sulfathiazole were 1.12, 2.1, 0.1, 6.6 ${\mu}g/L$, respectively. The long term effects of antibiotics were highly enhanced while the short-term effects were not strong. The sensitivities of B. kugenumaensis to copper and cadmium were higher than or comparable to those of other freshwater branchiopods (Streptocephalus spp., Thamnocephalus sp.), and far higher than the marine species (Artemia sp.). There were significant effects on the survival of B. kugenumaensis after long term exposure to relatively lower concentrations of copper, cadmium, fenbendazole and sulfathiazole. Therefore, B. kugenumaensis seems quite a good candidate species for the ecotoxicological assessments of freshwater environments.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.310-314
• /
• 2016

Background: FCTC10 container is designed to transport $^{60}Co$ radioactive sources used in irradiation industry. It belongs to Type B(U) Category III (yellow) package when being loaded with a $^{60}Co$ source of $1.8{\times}10^5$ Ci. Materials and Methods: The container is constituted of shielding container, basket, protective cover and bracket. Shielding ability is provided mainly by stainless steel shells, tungsten alloy and lead among steel shells. Radiation level around the container has been calculated with both Monte Carlo simulations and measurements. Results and Discussion: It is proven that the shielding performance of the container fulfills the requirements in GB11806-2004 (Regulations for the safe transport of radioactive material, China Standard Press). Exposure doses to workers and to critical groups of public were calculated based on hypothetical exposure scene according to transport practice experience. Conclusion: The results show that doses to workers and public are less than the constraint dose considered in design, and the radiation level would be increased less than a factor of 2 under design basis accidents.