• 한국전기화학회:학술대회논문집
• /
• 2002.04a
• /
• pp.53-53
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.338-339
• /
• 2005

• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.135-144
• /
• 2024

The present study investigated waste medium from a domestic shiitake mushroom farm, which was pyrolyzed to produce biochar. The yield rate of the biochar was compared after exposure to various pyrolysis temperature conditions, and the characteristics of the produced biochar were analyzed. The present study focused on the carbon dioxide (CO₂) adsorption capacity of the resulting biochar. The CO₂ adsorption capacity exhibited a correlation with the pyrolysis temperature of the biochar, with increasing temperatures resulting in higher CO₂ adsorption capacities. Brunauer-Emmett-Teller (BET) analysis showed that the CO₂ adsorption capacity was related to the surface area and pore volume of the biochar. Calcium is added to the process of producing mushroom medium. Experiments were performed to investigate the CO₂ adsorption capacity of the biochar from the waste medium with the addition of calcium. In addition, CO₂ adsorption experiments were conducted after the pyrolysis of kenaf biochar with the addition of calcium. The results of these experiments show that calcium affected the CO₂ adsorption capacity.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.77-82
• /
• 2009

Many countries have been interested in sustainable development of buildings for environmental preservation. Thus it is significant to assess building envelopes in terms of $CO_2$ emissions owing to Kyoto Protocol. In this paper, a Double Skin Facade(DSF) installed in a general office building was assessed by $CO_2$ emissions(one of the performance-based assessment). To predict $CO_2$ emissions caused by the building energy consumption, the dynamic simulation program(Energy Plus) and $CO_2$ emission factor was used. Because DSF has various airflow regimes, pre-simulation runs were conducted to decide proximate optimal airflow regimes depending on seasonal variation. It is shown that the DSF can achieve 17.1-36.5% of annual energy savings.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.6
• /
• pp.295-301
• /
• 2017

This paper relates to the study of load characteristics applicable to wind turbine generators induced by earthquakes. An artificial design earthquake wave generated through the target spectrum and the envelope function of Richter Magnitude Scale (ML) 7.0 as in ASCE4-98 was created. A simulation of earthquake loads were performed according to the design load cases (DLC) 9.5~9.7 of GL guidelines. Additionally, simulation of seismic loads experienced by Wind Turbines installed in the Gyeongju region were carried out utilizing artificial earthquakes of ML 5.8 simulating the real earthquakes during the Gyeongju Earthquakes of Sept. 2016.

• Nuclear Engineering and Technology
• /
• v.32 no.4
• /
• pp.342-349
• /
• 2000

A soil whose texture is silt loam was collected for the study from an area around a nuclear facility in Korea. The equilibrium sorption coefficient between Co$^{2+}$in water and the soil was 1.51/kg, on the other hand, that between Co$^{2+}$ in EDTA and the soil was 0.21/kg. The values calculated by the developed nonequilibrium sorption code corresponded to the experimental values better than those calculated by the existing equilibrium sorption code. When an EDTA solution was used as a solvent to decontaminate Co$^{2+}$ in the soil column, the relative Co$^{2+}$ concentrations of the effluent were higher at 2~10 pore volumes than those of the case using water. The soil in the column was decontaminated by 95.5% of the total amount of Co$^{2+}$ after being flushed with EDTA solution of 20 pore volumes.e volumes.

• New & Renewable Energy
• /
• v.19 no.3
• /
• pp.1-12
• /
• 2023

This study aims to evaluate the optimal size of the hydrogen facility to be installed in a zero-energy district in terms of load matching and facility efficiency. A mismatch between energy generation and consumption is a common occurrence in zero-energy districts. This mismatch adversely effects the energy grid. However, using an energy carrier such as hydrogen can solve this problem. To determine the optimal size of hydrogen fuel cells to be used on-site, simulation of hydrogen installation is required at both district-and building- levels. Each case had four operating schedules. Therefore, we evaluated eight scenarios in terms of load matching, heat loss, and facility operational efficiency. The results indicate that district-level installation of hydrogen facilities enables more efficient energy use. Additionally, based on the proposed model, we can calculate the optimal size of the hydrogen facility.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2969-2974
• /
• 2020

Looking at the recent studies, nuclear energy and carbon dioxide (CO₂) emissions nexus shows inconclusive result. To further explain nuclear energy-pollution nexuses this study is an attempt to analyze the impact of nuclear energy on pollution reduction for BRICS countries covering data for the period from 1993 to 2017. This study conducts advanced panel techniques such as Continuously-Updated Fully-Modified (CUP-FM) and Continuously-Updated Bias-Corrected (CUP-BC) for long run estimation. Our results support the notion that nuclear energy reduce CO₂ emissions. Also, renewable energy corrects environmental pollution in BRICS countries. The magnitude of the coefficient of nuclear energy is less as compared to renewable energy, implying that nuclear is less effective in reducing environmental pollution. The findings offer significant policy understandings and suggestions not only for BRICS economies but for developing countries as well in designing suitable nuclear energy-growth-carbon policies.

• New & Renewable Energy
• /
• v.6 no.4
• /
• pp.15-29
• /
• 2010

In order to make the best choice for $CO_2$ abatement using renewable energy technologies, it is important to be able to adapt these technologies on the basis of their sustainability, which may include a variety of environmental indicators. This study examined the comparative sustainability of renewable technologies in terms of their life cycle $CO_2$ emissions and embodied energy, using life cycle analysis. The models developed were based on case studies of bioenergy pilot plant in P city of Kyungki province. Final results were total emission of $CO_2$ in Pocheonsi is 670,041 $tCO_2$, around 500,877 $tCO_2$ for electricity and for heat generation, and 169,164 $tCO_2$ for transportation. When used $1,984\;m^3$/day of waste (pig manure etc.) and operated CHP with wood chips of 144,664 ton/year, the $CO_2$ emission in P city was left as is an emission of 449,274 $tCO_2$ and an abatement of $CO_2$ in this region was increased by 32.9%.

• Journal of Powder Materials
• /
• v.22 no.6
• /
• pp.432-437
• /
• 2015

The en-riched $^{58}Ni$ powders are dissolved in acid solution and coated on a Cu target for proton irradiation at cyclotron to produce $^{57}Co$ radioisotope. The condition of the plating bath and the coating process are determined using the en-riched powders. To establish the coating conditions for $^{57}Co$, non-radioactive Co ions are dissolved in an acid solution and electroplated on to a rhodium plate. The thermal diffusion of electroplated Co into a rhodium matrix was studied to apply a $^{57}Co$ Mssbauer source. The diffusion depth from surface to matrix of Co is depended on the annealing temperature and time. The deposited Co atoms diffuse completely into a rhodium (Rh) matrix without substantial loss at an annealing temperature of 1200 for 4 hours.