• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.172-175
• /
• 2001

The co-cured Joining method, which is regarded as an adhesively bonded Joining method, is an efficient joining technique because both curing and bonding processes for the composite structures can be achieved simultaneously. It requires neither surface treatment onto the composite adherend nor an additional adhesive joining process because the excess resin, which is extracted from composite materials during consolidation, accomplishes the co-cured Joining process. Since the adhesive of the co-cured joint is the same material as the resin of the composite adherend, the analysis and design of the co-cured joint for composite structures are simpler than those of an adhesively bonded joint, which uses an additional adhesive. In this paper, effects of the manufacturing parameters, namely surface roughness, stacking sequence of the composite adherend, and manufacturing pressure in the autoclave during curing process, on the tensile load bearing capacity of the co-cured single lap joint will be experimentally investigated.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.95-98
• /
• 2001

Co-cured joining method is an efficient joining technique because both curing and bonding processes for the composite structures can be achieved simultaneously. It requires neither an adhesive nor a surface treatment of the composite adherend because the excess resin, which is extracted from composite materials during consolidation, accomplishes the co-cured joining process. In this paper, we considered three bond parameters, affecting tensile load bearing capacity of the co-cured single and double lap joints. Filially, we nave presented optimal bonding conditions for co-cured single and double lap joints with steel and composite adherends under tensile loads.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.5-8
• /
• 2002

The use of the co-cured joining method for composite structures is attractive due to several benefits. However, since the design stress level in cyclic loads is often smaller than the joint strength obtained from the static tensile load test, it is important to establish proper fatigue design criteria. Although some researchers have reported on co-cured joints, there are only a few papers published on the fatigue characteristics of co-cured joints. In this paper, the effect of bond parameters on the fatigue characteristics of a steel-composite co-cured double lap joint under cyclic tensile loads was experimentally investigated. We considered the surface roughness of the steel adherend and the stacking sequence of the composite adherend as bond parameters. A fatigue failure mechanism of the co-cured double lap joint was explained systematically by investigating the surfaces of failed specimens.

• Composites Research
• /
• 제31권1호
• /
• pp.17-22
• /
• 2018

장섬유 복합재료(Long Fiber Prepreg Sheet; LFPS)는 기존 연속섬유로 구성된 섬유 강화 복합재료에 비해 우수한 생산 효율과 성형성을 가지고 있다. 섬유 강화 복합재료가 타 재료와 혼성으로 사용이 되는 경우 이종 재료의 체결을 위해 접착 방법을 사용하게 되며, 접착부의 강도는 혼성 구조물의 강도를 결정하기 때문에 복합재료 접합부의 설계는 중요하다. 본 연구에서는 동시에 경화된 LFPS와 알루미늄의 접합부를 다양한 표면처리 조건과 온도 및 수분 환경조건에 따른 접착 특성을 평가하였다. 표면처리 기법으로는 기계적인 방법인 연마와 플라즈마 표면처리를 대상으로 하였다. 다양한 표면처리가 적용된 접착 조인트는 단면 겹치기 접착 조인트를 사용하여 실험하였다. 여러 조건들에서 접착 강도가 평가되었고 가장 적절한 조건이 도출되었다.