• Archives of Pharmacal Research
• /
• 제24권4호
• /
• pp.323-326
• /
• 2001

Previous studies have demonstrated that CW252053, a quinazoline antifolate, exhibits potent inhibitory activity against thymidylate synthase (TS) as well as cytotoxic activity against tumor cell lines in vitro. In this studys, we evaluated the in vivo antitumor efficacy of CW252053 in the mouse tumor model. Female B6D2F$_1$ mice were injected with LY3.7. 2C TK-/- (thymidine kinase deficient mouse Iymphoma) cells into the gastrocnemius muscle. Then, CW252053 was administered twice daily by intraperitoneal injection for 10 days, and tumor growth was monitored daily by leg diameter measurement. All animals in the vehicle, 5-FU, and low dose (30mgmg/kg CW252053 treated groups died between days 12 and 23 because of the tumor burden. In contrast, dosing with 60 mg/kg of CW252053 produced a cure rat against tumor growth of 37.5% and a survival rate of 50%. Even more significantly, a higher dose of CW252053 (120 mg/kg) elicited both a 100% cure rate and a 100% survival rate at the termination of the study, confirming that this compound has very potent in vivo antitumor activity against tumor growth. During the experimental period of this study no signs of toxicity were observed even at the high CW252053 dosage rate of 120 mg/kg.

• Composites Research
• /
• 제30권2호
• /
• pp.116-125
• /
• 2017

본 연구의 목적은 고온 산화성 분위기하에서 기계적물성이 우수한 탄화규소섬유(SiC Fiber)를 파일롯-규모로의 생산 제조공정을 개발하는 것이다. 프리세라믹 전구체로서 폴리카보실란(PCS)을 사용하여 탄화규소섬유를 제조하였다. 연속성의 PCS 섬유는 $300{\sim}350^{\circ}C$에서 PCS를 용융한 후에 용융방사로부터 얻었다. 열처리 전에 섬유의 불융화를 위하여 공기 분위기하에서 경화를하였다. 경화 전, 후에 측정한 FT-IR 스펙트라 피크로 부터 경화도를 계산하였다. 탄화규소섬유의 물성은 경화도에 따라 크게 영향을 받았다. 본 개발에서 열처리 중 섬유의 장력 조절로 우수한 물성을 갖는 탄화규소섬유를 얻었다. 탄화규소섬유의 화학조성과 기계적물성은 안정화섬유의 열처리시의 이송속도에 영향을 받았다. 탄화규소섬유를 공기분위기하 $1000^{\circ}C$에서 1분부터 50시간까지 노출한 후에 인장시험을 수행하였다. 그 결과 인장강도는 약 60%까지 감소함을 보여주었다. 장시간 노출시험시 낮은 인장 강도값을 나타내는 섬유는 화학성분 분석시 섬유의 표면에 많은 탄소량을 함유하고 있었다.

• Journal of Nutrition and Health
• /
• 제34권2호
• /
• pp.222-229
• /
• 2001

This study describes the application of the stages of change construct to fat intake by examining the associations of the stages of change with nutritional status and beliefs on health behavior. Data were obtained from apparently healthy 596 adults(326 females and 270 males) residing in large cities. Stages of change assessed by an algorithms based on 6 items were designed each subject into one of the 5 stages: precontemplation(PC), contemplation(CO), preparation(PR), action(AC) and maintenance(MA). Beliefs on health behavior were assessed by self efficacy as well as 4 belief scales from the Locus of Illness Control(LIC) developed using factor analysis such as internal disease cure and prevention and external disease cure and prevention. Energy and fat intakes were measured by a 39 item short form food frequency questionnaire. Regarding the 5 stages of change, MA stage comprised the largest group(37.9%), followed by Ac(30.7%), PC(11.4%), CO(10.4%) and PR(9.6%). Subjects who were females, older or healthier were more likely to belong to either AC or MA. Stage assignment of individuals was corroborated by their nutritional variables. Those in PC had the most energy and fat and those in MA ate the least for females. BMI was higher in PR than any other stages for both males and females. Those in PC were distinctive in that they were more externally oriented in terms of health control showing higher scores on external disease prevention(for males) and external disease cure(for females), and lower score on internal disease cure. On the other hand, those in MA received the highest scores on internal disease prevention and self efficacy, which suggested that they were more internally oriented. Canonical discriminant function analysis indicated that the 5 stages were importantly discriminated by BMI, self efficacy, internal disease prevention and external disease prevention for males and by fat intake, self efficacy and external disease cure variables for females. The results of our study confirm differences in stages of change in fat intake in terms of nutritional status and beliefs on heath behavior and indicate the need for taking these phases of change into account in nutrition advice. (Korean J Nutrition 34(2) : 222-229, 2001)

• 펄프종이기술
• /
• 제38권2호
• /
• pp.9-15
• /
• 2006

Neutral sizing is required for linerboard to solve the troubles in strength and process caused by recycled raw materials. AKD sizing efficiency can be influenced by process condition like white water quality, fines retention and so on. Therefore, this study was aimed to evaluate sizing performance of general and fast cure type AKDs using process water obtained from linerboard mill. To evaluate effect of process water quality on AKD sizing, white water was diluted with tap water at the different dilution ratios and UKP slurry was sized using the prepared water. Also, effects of inorganic and organic ion material on sizing were examined. When white water was used for stock forming, UKP sheet showed very low sizing degree. Sizing degree of sheet was increased with increase of dilution ratio because water quality was improved. Especially anionic organic material had a greater influence on AKD sizing than inorganic material. When white water quality was deteriorated, fast cure type AKD showed superior sizing performance to general type AKD.

• 공업화학
• /
• 제16권6호
• /
• pp.842-847
• /
• 2005

니트릴고무(NBR) 신재와 작업현장에서 나온 스크랩을 고온 전단분쇄기술로 분말화한 재료(재생 NBR)를 다양한 혼합비로 블렌드물을 제조하고, 재생재료의 함량에 따른 블렌드물의 가황 거동, 물리적 특성의 변화를 조사하였다. 또한, 열 및 각종 유체에 대한 각 블렌드물의 저항성을 물리적 방법으로 조사하였다. 신재 NBR에 고온 전단 분쇄기술로 제조한 재생NBR을 0~50 phr의 함량으로 블렌드하여 가황거동 및 물리적 특성을 측정한 결과, 가황 거동은 점도가 증가하고 스코치 시간은 감소하였으며, 내열 및 유체특성은 향상되었다.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.97-104
• /
• 2019

Emulsion styrene-butadiene rubber silica wet masterbatch (ESBR silica WMB) technology was studied to develop highly filled and highly dispersed silica compounds, involving the preparation of a composite by co-coagulating the modified silica and the rubber latex in a liquid phase. Previous studies have shown that when manufacturing ESBR silica WMB/Butadiene silica dry masterbatch (BR silica DMB) blend compounds, preparing BR silica dry masterbatch and mixing it with ESBR silica WMB gave excellent results. However, WMB still has the problem of lower crosslink density due to residual surfactants. Therefore, in this study, tetrabenzylthiuram disulfide (TBzTD) was added instead of diphenyl guanidine (DPG) in the ESBR silica WMB/BR silica DMB blend compounds and sulfur/CBS contents were increased to evaluate their cure characteristics, crosslink densities, mechanical properties, and dynamic viscoelastic properties. TBzTD was found to be more effective in increasing the crosslink density and to produce superior properties compared to DPG. In addition, with increasing sulfur/CBS contents, mechanical properties and rolling resistance were enhanced due to high crosslink density, but the abrasion resistance was not significantly changed because of the toughness.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.179-179
• /
• 1994

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.189-196
• /
• 2020

PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al₂O₃ sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

• Composites Research
• /
• 제21권1호
• /
• pp.16-21
• /
• 2008

일반적인 아미드형 가교제(HD)를 함유한 에폭시 수지의 가교거동을 캐슈너트 외피유(CNSL) 및 CNSL-포름알데하이드 수지(CFR) 그리고 피마자유 존재 하에서 시차열량계(DSC)를 이용하여 조사하였다. 가교반응에 대한 활성화 에너지를 여러 가지 가열속도에서 비등온 DSC 열량그래프로부터 계산하였다. 피마자유 존재 하에서 에폭시 수지의 가교는 1단계 반응을 나타낸 반면 CNSL 및 CFR 존재 하에서는 2단계 가교거동을 나타내었다. 즉, 에폭시 수지/CNSL(혹은 CFR)/HD 블렌드의 경우 경쟁적인 가교반응이 나타났다. HD가 없는 에폭시 수지/CNSL(혹은 CFR) 블렌드의 경우 CFR 시스템이 CNSL보다 낮은 가교엔탈피 값을 나타내었고, CNSL 및 CFR 함량이 증가할수록 가교활성화 에너지는 증가하였다.

• Elastomers and Composites
• /
• 제46권2호
• /
• pp.144-151
• /
• 2011

Intermittent CSR 측정법을 이용하여 hydrogenated NBR(이하 HNBR) 오링의 노화 거동과 수명 예측에 관하여 연구하였다. HNBR 오링의 가교 구조는 황 가교와 퍼옥사이드 가교를 이용하여 각각 제조하였다. Intermittent CSR jig는 오링의 실제 사용환경을 고려하여 설계 제작하였다. 각 측정 조건에 따른 마찰 영향, 열 손실 영향 및 Mullins effect에 의한 intermittent CSR의 응력 거동 변화를 관찰하였다. 오링의 노화 거동은 $100{\sim}120^{\circ}C$에서의 가속 노화 연구를 통하여 관찰하였다. 고장조건 50%와 40%에 대하여 HNBR 오링은 선형 노화 거동을 나타내었으며, Arrhenius relationship을 만족시켰다. HNBR-S 오링의 활성화 에너지는 70.6 kJ/mol로 나타났으며, Arrhenius plot으로부터 오링의 예측 수명은 고장 조건 50%와 40%에 대하여 각각 31.1년과 33.7년으로 나타났다. HNBR-P 오링의 활성화 에너지는 72.1 kJ/mol로 나타났으며, Arrhenius plot으로부터 오링의 예측 수명은 고장 조건 50%와 40%에 대하여 각각 34.0년과 36.5년으로 나타났다. 황 가교에 비하여 퍼옥사이드 가교에서 고무의 노화 속도가 느리게 나타났으며, 활성화 에너지는 높게 나타났다.