• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.242-248
• /
• 2017

Wet masterbatch (WMB) technology is studied to develop high-content and highly disperse silica-filled compounds. This technology refers to the solidification of surface-modified silica with a rubber solution or latex. Until now, researchs based on styrene butadiene rubber (SBR)/silica WMB has been mainly performed. However, the blending of SBR/silica WMB and BR is not known and is currently under research and development. Therefore, in this study, the BR blending method suitable for emulsion (ESBR)/silica WMB is investigated by measuring their cure characteristics and the mechanical and dynamic viscoelastic properties. As a result, it was confirmed that the blending of ESBR/silica WMB and BR/silica dry masterbatch is most appropriate. However, it showed a disadvantage compared with the conventional mixing method, which was due to the surfactant remained and the sulfuric acid used as the coagulant.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.404-409
• /
• 2004

To maximize the productivity in machining molds and dies, machine tools should operate at high speeds. During the high speed operation of moving frames or spindles, vibration problems are apt to occur if the machine tool structures are made of conventional steel materials with inferior damping characteristics. However, self-excited vibration or chatter is bound to occur during high speed machining when cutting speed exceeds the stability limit of machine tool. Chatter is undesirable because of its adverse effect on surface finish, machining accuracy, and tool life. Furthermore, chatter is a major cause of reducing production rate because, if no remedy can be found, metal removal rates have to be lowered until vibration-free performances is obtained. Also, the resonant vibration of machine tools frequently occurs when operating frequency approaches one of their natural frequencies because machine tools have several natural frequencies due to their many continuous structural elements. However, these vibration problems are closely related to damping characteristics of machine tool structures. The polymer concrete has high potential for machine tool bed due to its good damping characteristics with moderate stiffness. This paper presents the use of polymer concrete and sandwich structures to overcome vibration problems. Also, co-cure bonding method for functional part mounting was exhibited experimentally, by which manufacturing time and cost for polymer concrete bed will be remarkably reduced.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.215-219
• /
• 2010

Nitrile rubber (NBR) composites were prepared using the commercially avaliable rubber compounding process with Cloisite$^{(R)}$ 10A or carbon black as fillers. When Cloisite$^{(R)}$ 10A was used as a filler in the NBR composites, the mechanical properties, oil resistant, and oxygen barrier were better than those for carbon black composites. In cure characteristics of NBR/clay composites, scorch time and curing time were reduced. It was found that alkyl ammonium ion inserted in Cloisite$^{(R)}$ 10A was considered as an accelerator of vulcanization for NBR composites.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.57-62
• /
• 1997

The combined structure of hybrid composite made through the bonding process of materials of different properties greatly defines its mechanical characteristics, as the results of the experiments on materials of different properties show much dissimilarity. When carbon/epoxy materials are applied to hybrid composite, the carbon materials helps to improve the mechanical properties of the hybrid composite, and the epoxy reduces its fracture strain and impact resistance. Carbon fiber which is now in general commercialization is classified as high modulus or high strength system, and its manufacturing methods are various. The study of the materials having combined structure is focused on the numerical analysis of the layers of bonding surface in materials with difference modulus. The hybrid composite made through the multilayered bonding of reinforced aluminium sheets with aramid fiber now faces the marketing phase, and especially its excellent fatigue resistance and mechanical properties promote active researches on the similar products of hybrid composite. This study aims to investigate the effects of CFRP volume ratio and fiber's orientation over the properties of mechanical strength and fatigue life of the hybrid composite, AI7075/CFRP. To carry out this study, static tensile and fatigue tests were given to some of the panels which, made through the co-cure processing in an autoclave, have different CFRP volume ratio and carbon fiber orientations.

• Clinical and Experimental Pediatrics
• /
• v.55 no.7
• /
• pp.219-223
• /
• 2012

Since the first umbilical cord blood transplantation (CBT) in 1998, cord blood (CB) has now become one of the most commonly used sources of hematopoietic stem cells for transplantation. CBT has advantages of easy procurement, no risk to donor, low risk of transmitting infections, immediate availability and immune tolerance allowing successful transplantation despite human leukocyte antigen disparity. Several studies have shown that the number of cells transplanted is the most important factor for engraftment in CBT, and it limits the wide use of CB in adult patients. New strategies for facilitating engraftment and reducing transplantation-related mortality are ongoing in the field of CBT and include the use of a reduced-intensity conditioning regimen, double-unit CBT, ex vivo expansion of CB, and co-transplantation of CB and mesenchymal stem cells. Recently, the results of two international studies with large sample sizes showed that CB is an acceptable alternative source of hematopoietic stem cells for adult recipients who lack human leukocyte antigen-matched adult donors. Along with the intensive researches, development in banking process of CB will amplify the use of CB and offer the chance for cure in more patients.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.647-648
• /
• 2006

The length of root canal has to be measured to cure root canal. Several apex locators were developed to measure the length of root canal. And they were verified by X-ray or micrometer method. But these methods do not consider the non-linear bends of pulp and have ${\pm}0.5mm$ error which is large to measure the length of root canal. The purpose of this study is the research of new method to measure the length of root canal and verifying the apex locator using Micro-CT. The length of root canal of 6 teeth were measured with the apex locator. When the apex locator reads 0.5, 0.6, 0.7, 0.5, 0.9, 1.0mm, the teeth with the file fixed were photographed. The average lengths of root canal of 6 teeth measured by Micro-CT were 0.488, 0.589, 0.680, 0.775, 0.897, 0.992mm.

• Archives of Plastic Surgery
• /
• v.42 no.1
• /
• pp.52-58
• /
• 2015

Background The erbium:yttrium scandium gallium garnet (Er:YSGG) laser differs from other laser techniques by having a faster and higher cure rate. Since the Er:YSGG laser causes an appropriate proportion of ablation and coagulation, it has advantages over the conventional carbon dioxide ($CO_2$) laser and the erbium-doped yttrium aluminum garnet (Er:YAG) laser, including heating tendencies and explosive vaporization. This research was conducted to explore the effects and safety of the Er:YSGG laser. Methods Twenty patients participated in the pilot study of a resurfacing system using a 2,790-nm Er:YSGG laser. All patients received facial treatment by the 2,790-nm Er:YSGG laser system (Cutera) twice with a 4-week interval. Wrinkle reduction, reduction in pigment inhomogeneity, and improvement in tone and texture were measured. Results Study subjects included 15 women and five men. Re-epithelization occurred in all subjects 3 to 4 days after treatment, and wrinkle reduction, reduction in pigment inhomogeneity, and improvement in tone and texture within 6 months of treatment. Conclusions The 2,790-nm YSGG laser technique had fewer complications and was effective in the improvement of scars, pores, wrinkles, and skin tone and color with one or two treatments. We expect this method to be effective for people with acne scars, pore scars, deep wrinkles, and uneven skin texture and color.

• Animal cells and systems
• /
• v.5 no.2
• /
• pp.139-143
• /
• 2001

Alzheimer's disease is the most common form of dementia and no cure is known so far. Extensive genetic works and in vitro experiments combined with clinical observations link amyloid $\beta$--protein (A$\beta$-) to the pathogenesis of Alzheimer's disease (AD). It was hypothesized that $A\beta$- becomes toxic when it adopts a fibrillar conformation. Recently, non-fibrillar form of $A\beta$- was observed and the potential role in the pathogenesis of AD became an interesting subject. In this study, the cytotoxicity of non-fibrillar $A\beta$- and fibrillar $A\beta$- was compared on oxidative stress, membrane damage, or nucleosome break down. Non-fibrillar $A\beta$- was not toxic in peripheral nervous system-derived cells but significantly toxic in central nervous system-derived cells while fibrillar $A\beta$- was non-selectively toxic in both cell culture. The neurotoxicity of non-fibrillar $A\beta$- was reproduced in semi-in vivo culture of mouse brain slice. In conclusion, non-fibrillar $A\beta$- could be more relevant to the selective neurodegeneration in Alzheimer's brains than fibrillar $A\beta$- and further research needs to be done for identification of the cause of AD.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.115-120
• /
• 2021

In this study, cigarettes, which are an essential element in the production of tobacco, are generally not cylindrical. The main materials used for cigarettes are generally hemp and pulp. For the production of cylindrical cigarettes, the cigarettes or cylinders are mounted via gluing. This adhesive is a vinyl acetate emulsion, a high-temperature melt adhesive, and is adhered in a cylindrical shape immediately after being linearly applied to the inner surface of the paper roll or a local part. These adhesives are greatly affected by the atmospheric temperature of the manufacturing space in summer and winter. In the summer, even if the adhesive is temporarily adhered, the coagulation time of the adhesive is long, and problems such as deterioration of the adhesive state occur. in the winter, there is a problem that the temperature of the manufacturing space is low and the adhesive force of the adhesive is poor, resulting in defective adhesive products. In order to solve these problems, another heat transfer device is utilized to cure the remaining adhesive to ensure higher adhesiveness.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.568-573
• /
• 2010

Adhesive strength was evaluated for the polyester fabric treated with various concentration of polymeric isocyanate to introduce functional group on the surface. Also experiments were performed to find out the type of latex, F/R mole ratio, and FR resin/latex weight ratio for the RFL solution to optimize adhesion between HNBR compound and the treated polyester fabric. Optimum adhesion strength was obtained when 7 wt% of the concentration of polymeric isocyanate, NBR latex because of the compatibility of HNBR compound, 1/1 of F/R mole ratio, and 20 wt% of FR resin/latex were applied. Optimum cure temperature for the RFL solution was $200^{\circ}C$ according to the results of peel test and the reason was determined by analyzing the ATR FTIR spectra of the RF resin according to the curing temperature.