• 한국응용과학기술학회지
• /
• 제13권2호
• /
• pp.77-84
• /
• 1996

Poly(vinyl acetate)와 poly(vinyl acetate-co-2-ethylhexyl acrylate)를 여러 조건에서 semicontinuous emulsion 중합으로 합성하였다. Overall conversion, emulsion 입자크기, pH, 점도 등을 합성한 두 emulsion polymer에 대해 측정하였다. Vinyl acetate monomer에 2-ethylhexyl acrylate를 도입함으로서 emulsion 입도, 점도, 중합 속도, 유리 전이 속도가 감소함을 확인하였다.

• 디지털콘텐츠학회 논문지
• /
• 제17권4호
• /
• pp.227-234
• /
• 2016

한자가 유입된 당시 한자의 원음도 함께 들어와서 현재 많은 한자들이 중국과 같은 한자에 같은 발음으로 사용하고 있으나 한국과 중국은 한자에 대한 발음이 서로 독립적으로 보존 및 변천되어 오늘날은 그 발음을 표기하는 방식이 서로 다르다. 본 연구는 중국 한자의 발음인 한어병음과 한국 한자발음을 구성하는 초성, 중성, 종성의 변화를 시스템으로 분석하여 중국어 발음과 대응되는 변환규칙을 생성함으로써 쉽게 중국어 발음을 학습할 수 있는 중국어규칙변환 교육시스템으로 설계 및 구현하였다. 본 연구는 중국어규칙변환 교육시스템을 웹으로 구현하였고, 앱등의 다양한 어플리케이션을 통하여 중국어를 학습하는데 도움이 되도록 하였다.

• 한국지반신소재학회논문집
• /
• 제16권1호
• /
• pp.9-17
• /
• 2017

본 연구에서는 암성토의 토공량 설계에 대한 대책방안으로 현장밀도시험을 수행하였으며, 현장밀도시험결과 암성토부의 발파암 평균 체적환산계수는 1.001로서 풍화암의 체적환산계수 1.1보다 작은 값이 나타났다. 이와 같이 암성토의 경우 여러 가지 현상에 의해 토공량의 증감 원인을 제공하고 있으나, 이에 대한 조사 및 시험방법 등 구체적인 기술 등이 부족한 실정이므로 본 연구결과에서와 같이 체적환산계수를 검토하기 위한 조사방법으로 현장밀도시험방법이 매우 유용한 방법임을 확인하였다.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.67-77
• /
• 2000

Investigated was the effect of propene(C3H6) on the NO-NO2 conversion in dry exhaust gases from lean burn engine using a pulsed corona discharge. A kinetic model was developed to characterize the plasma chemistry in simulated exhausts containing propene. The model uses ELENDIF program to solve Boltzmann equation for electron energy distribution function, and CHEMKIN-II program to solve stiff ODE(ordinary differential equation) problems for species concentrations. The corona discharge energy per pulse and the time-space averaged E/N were obtained by fitting the model to experimental data. The model calculation shows good agreement for NO and NO2 concentrations with the experimental data, and predicts the formation of byproducts such as CH2O, CH3HCO, CO AND CH3NO2 Propene enhances the NOx conversion enormously at lower energy density and the NOx conversion increases with the increase of initial propene and oxygen concentration, and temperature.

• Journal of the Korean Wood Science and Technology
• /
• 제50권6호
• /
• pp.475-489
• /
• 2022

The objective of this study was to understand the conversion characteristics of glucose and xylose using the major monosaccharide standards for lignocellulosic biomass. The acid-catalyzed organosolv pretreatment conducted using ethanol was significantly different from the acid-catalyzed process conducted in an aqueous medium. 5-hydroxymethylfurfural (5-HMF), levulinic acid and furfural were produced from glucose conversion. The maximum yield of 5-HMF was 5.5%, at 200℃, when 0.5% sulfuric acid was used. The maximum yield of levulinic acid was 21.5%, at 220℃, when 1.0% sulfuric acid was used. Furfural was produced from xylose conversion and under 0.5% sulfuric acid, furfural reached the maximum yield 48.5% at 210℃. Ethyl levulinate and methyl levulinate were also formed from the glucose standard following the esterification reaction conducted under conditions of the combined conversion method, which proceeded under both ethanol-rich and water-rich conditions.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.32-44
• /
• 2002

Selective catalytic reduction of nitric oxide by methane in the presence of excess oxygen was investigated over copper and cobalt ion-exchanged ZSM-5 zeolites. Copper ion-exchanged ZSM-5(Cu-ZSM-5) has the limitations for commercial applications to lean-bum gasoline and diesel engines due to low thermal stability and resistance to water vapor and sulfur dioxide. But cobalt ion-exchanged ESM-5(Co-ZSM-5) is more active at high temperatures and also stable to water vapor and sulfur dioxide for catalytic reduction of nitric oxide by methane. The catalytic activity of Cu-ZSM-5 for NO reduction increases with increasing temperatures, reaches the maximum conversion of 23.0% at 350\"C. and then decreases with higher temperatures. In the meantime catalytic activities of Co-ZSM-5 show the maximum conversion of 25.8% at $500^{\circ}C$ Therefore Co-ZSM-5 catalysts have higher thermal stability at high temperatures. Catalytic activities of both zeolites were remarkably enhanced with the existence of oxygen in the exhaust. It is noted that the catalytic activity of Cu-ZSM-5 decreases with the increasing concentration of methane while the catalytic activity of Co-ZSM-5 decreases with increasing contents of methane in the exhaust. This may imply the existence of different paths of NO reduction by methane in the presence of excess oxygen fur Cu-ZSM-5 and Co-ZSM-5 catalysts. For binary metal ionexchanged ZSM-5, the primary ion-exchanged metal may be masked by secondary ion-exchanged component, which plays the important role for catalytic activities of binary metal ion-exchanged ZSM-5, Therefore CuCo-ZSM-5 catalysts show the similar volcano-shaped curves to Cu-ZSM-5 catalysts between the activity and temperature. It Is interesting that the activities of CoCu-ZSM-5 catalysts indicate almost no dependence on the concentration of methane in the exhaust.aust.

• Tribology and Lubricants
• /
• 제36권3호
• /
• pp.153-160
• /
• 2020

In this paper, we present a hydrostatic bearing design and rotordynamic analysis of a pump-and-drive turbine module for a 250-kW supercritical CO₂ cycle application. The pump-and-drive turbine module consists of the pump and turbine wheel, assembled to a shaft supported by two hydrostatic radial and thrust bearings. The rated speed is 21,000 rpm and the rated power is 143 kW. For the bearing operation, we use high-pressure CO₂ as the lubricant, which is supplied to the bearing through the orifice restrictor. We calculate the bearing stiffness and flow rate for various orifice diameters, and then select the diameter that provides the maximum bearing stiffness. We also conduct a rotordynamic analysis based on the design parameters of the pump-and-drive turbine module. The predicted Campbell diagram shows that there is no critical speed below the rated speed, owing to the high stiffness of the bearings. Furthermore, the predicted damping ratio indicates that there is no unstable mode. We conduct the operating tests for the pump and drive turbine modules within the supercritical CO₂ cycle test loop. The pressurized CO₂, at a temperature of 136℃, is supplied to the turbine and we monitor the shaft vibration during the test. The test results show that there is no critical speed below the rated speed, and the shaft vibration is controlled to below 3 ㎛.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.249-256
• /
• 2011

In this study, the Ni-based catalysts for the production of synthetic natural gas were prepared by various preparation methods such as the co-precipitation, precipitation, impregnation and physical mixing methods. The ranges of the reaction conditions were the temperatures of 250~$350^{\circ}C$, $H_2$/CO mole ratio of 3.0, the pressures of 1 atm and the space velocity of 20000 $ml/g_{-cat{\cdot}}{\cdot}h$. It was found that the catalyst prepared by precipitation method had higher CO conversion than the catalyst prepared by co-precipitation method. While the catalyst prepared by precipitation method had the formation of NiO structure, the catalyst prepared by co-precipitation method had the formation of $NiAl_2O_4$ structure. It was confirmed that Ni-based catalyst prepared by the physical mixing method had the lowest CO conversion because it was deactivated by the production of $Ni_3C$ during the methanation. As a result, it was shown clearly that Ni-based catalysts prepared by impregnation method expressed the highest catalytic activity in CO methanation.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.503-512
• /
• 2012

There is a new power generation system such as direct coal fuel cell (DCFC) with a solid oxide electrolyte operated at relatively high temperature. In the system, it is of great importance to feed coal continuously into anodic electrode surface for its better contact, otherwise it would reduce electrochemical conversion of coal. For that purpose, it is required to improve the electrochemical conversion efficiency by using either rigorous mixing condition such as fluidized bed condition or just by recirculating coal particle itself successively into the reaction zone of the system. In this preliminary study, we followed the second approach to investigate how significantly particle recycle would affect the coal conversion efficiency. As a first phase, coal conversion was analyzed and evaluated from the thermochemical reaction of carbon with air under particle recirculating condition. The coal conversion efficiency was obtained from raw data measured by two different techniques. Effects of temperature and fuel properties on the coal conversion are specifically examined from the thermochemical reaction.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2009년도 학술논문요약집
• /
• pp.83-84
• /
• 2009