• Title/Summary/Keyword: Co-Pd films

Search Result 78, Processing Time 0.031 seconds

Characteristics of Amorphous CoNbZrPd Thin Films Deposited by Sputtering (스퍼터링법으로 제조된 CoNbZrPd 비정질 박막의 특성)

  • Min, B.K.;Kim, H.S.;Song, S.J.;Oh, Y.W.;Her, J.S.
    • Proceedings of the KIEE Conference
    • /
    • 1999.07d
    • /
    • pp.1968-1970
    • /
    • 1999

  • 본 연구에서는 RF 마그네트론 스퍼터링법으로 CoNbZrPd 비정질 연자성 박막을 제조하여 Pd의 첨가 효과와 자장중 열처리에 의한 특성 변화에 대해 연구하였다. Pd가 4.34 at% 첨가된 $Co_{87.56}Nb_{6.45}Zr_{1.65}Pd_{4.34}$ 박막은 비정질 구조이며 Pd 첨가에 의해 보자력은 0.54 Oe으로 감소하였으며, 이방성 자계는 10.45 Oe로 Pd를 첨가하지 않은 CoNbZr 비정질 박막 보다 특성이 향상되었다. $Co_{87.56}Nb_{6.45}Zr_{1.65}Pd_{4.34}$ 비정질 박막은 $400^{\circ}C$까지 비정질 상을 유지하고 있지만, 연자기 특성이 열화되어 보자력이 증가하고 이방성자계가 급격히 감소하였지만, 포화 자화는 크게 변화지 않았다.

  • PDF

Physical Property Change of the Gapless Semiconductor $PbPdO_2$ Thin Film by Ex-situ Annealing

  • Choo, S.M.;Park, S.M.;Lee, K.J.;Jo, Y.H.;Park, G.S.;Jung, M.H.
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.371-372
    • /
    • 2012

  • We have studied lead-based gapless semiconductors, $PbPdO_2$, which is very sensitive to external parameters such as temperature, pressure, electric field, etc[1]. We have fabricated pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films using the pulsed laser deposition. Because of the volatile element of Pb, it is very difficult to grow the films. Note that in case of $MgB_2$, Mg is also volatile element. So in order to enhance the quality of $MgB_2$, some experiments are carried out in annealing with Mg-rich atmosphere [2]. This annealing process with volatile element plays an important role in making smooth surface. Thus, we applied such process to our studies of $PbPdO_2$ thin films. As a result, we found the optimal condition of ex-situ annealing temperature ${\sim}650^{\circ}C$ and time ~12 hrs. The ex-situ annealing brought the extreme change of surface morphology of thin films. After ex-situ annealing with PbO-rich atmosphere, the grain size of thin film was almost 100 times enlarged for all the thin films and also the PbO impurity phase was smeared out. And from X-ray diffraction measurements, we determined highly crystallized phases after annealing. So, we measured electrical and magnetic properties. Because of reduced grain boundary, the resistivity of ex-situ annealed samples changed smaller than no ex-situ sample. And the carrier densities of thin films were decreased with ex-situ annealing time. In this case, oxygen vacancies were removed by ex-situ annealing. Furthermore, we will discuss the transport and magnetic properties in pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films in detail.

  • PDF

Preparation of Gas Sensors with Nanostructured SnO2 Thick Films with Different Pd Doping Concetrations by an Ink Dropping Method

  • Yoon, Hee Soo;Kim, Jun Hyung;Kim, Hyun Jong;Lee, Ho Nyun;Lee, Hee Chul
    • Journal of the Korean Ceramic Society
    • /
    • v.54 no.3
    • /
    • pp.243-248
    • /
    • 2017

  • Pd-doped $SnO_2$ thick film with a pure tetragonal phase was prepared on patterned Pt electrodes by an ink dropping method. Nanostructured $SnO_2$ powder with a diameter of 10 nm was obtained by a modified hydrazine method. Then the ink solution was fabricated by mixing water, glycerol, bicine and the Pd-doped $SnO_2$ powder. When the Pd doping concentration was increased, the grain size of the Pd-doped $SnO_2$ thick film became smaller. However, an agglomerated and extruded surface morphology was observed for the films with Pd addition over 4 wt%. The orthorhombic phase disappeared even at a low Pd doping concentration and a PdO peak was obtained for a high Pd doping concentration. The crack-free Pd-doped $SnO_2$ thick films were able to successfully fill the $30{\mu}m$ gap of the patterned Pt electrodes by the optimized ink dropping method. The prepared 3 wt% Pd-doped $SnO_2$ thick films showed monoxide gas responses ($R_{air}/R_{CO}$) of 4.0 and 35.6 for 100 and 5000 ppm, respectively.

  • https://doi.org/10.4191/kcers.2017.54.3.10 인용 PDF KSCI