• 대한임상검사과학회지
• /
• 제36권1호
• /
• pp.27-32
• /
• 2004

Bone marrow transplantation(BMT) is widely used as curative means of various malignant and nonmalignant hematologic disorders, and early and accurate determination of engraftment is very important for critical management decisions. Reticulocyte counts performed by automated flow cytometric methods is a good indicator of erythropoietic activity and its evaluation has been proposed as an early predictor of bone marrow regeneration. Some reports highlighted the usefulness of the percentage of highly fluorescent reticulocytes and the sum of highly and medium fluorescent reticulocytes(immature reticulocyte fraction, IRF). In Asan Medical Center, the criteria for engraftment following BMT or PBSCT was defined as the first day of a 3-day trend of absolute neutrophil count(ANC)${\geq}500/uL$ and platelet count${\geq}30{\times}10^3/uL$. In 1999, Grotto et al proposed an indidator of bone marrow recovery as the first day on which the IRF was twice the minimum value after bone marrow transplantation. To compare the both criterias, we got consecutive datas of immature reticulocyte fraction, absolute neutrophil count(ANC), WBC count, platelet count and reticulocyte count by XE-2100 automated hematology analyzer(Sysmex Co. Japan) from 33 patients daily after BMT. When compared to standard neutrophil engraftment(10-30 days, $16.2{\pm}4.6days$), IRF engraftment (5-21 days, $11.0{\pm}3.9days$) occured significantly earlier in 87.9% of patients(P<0.05). The mean engraftment day for WBC count(11-29 days, $16.4{\pm}4.3days$) was similar to ANC, but platelet count and reticulocyte count revealed more delayed data (10-49 days, $19.1{\pm}7.4days$ vs 17-64 days, $31.4{\pm}14.1days$). In conclusion, our results confirm that an increase in the immature reticulocyte population is the earliest sign of the hematopoietic recovery after BMT and that automated reticulocyte quantification including immature fraction may be integrated into clinical protocols to evaluate bone marrow reconstitution.

• 한국식품영양과학회지
• /
• 제43권7호
• /
• pp.1048-1054
• /
• 2014

소금의 이산화황 발생 원인을 구명하기 위하여 갯벌천일염 (MSS)과 구운 소금(RS)의 시간 경과(RS1, RS2, RS3 및 RS4)에 따른 일반성분, 중금속, 무기질 함량을 분석하고 이산화황 발생 및 각 소금의 환원력을 비교 분석하였다. 이산화황과 아황산은 모두 검출되지 않았으며, 황산이온은 MSS 및 RS에서 각각 35,601.65 ppm과 29,878.15~36,097.45 ppm으로 시간이 지날수록 감소되는 경향을 나타내었다. ORP는 MSS(181.15 mV)에서 가장 낮았고 RS1(58.55 mV)에서 가장 높았다. 수분은 MSS가 9.34%였으나 RS에서 크게 감소되었으며, RS의 NaCl은 94.77~95.77%로 증가되었다. RS 시간 경과에 따라 수분과 염도에 차이는 없었다. 불용분과 사분은 MSS에 비해 RS에서 더 높은 함량을 나타내었고 Ca, K, Mg는 유의한 차이를 나타내지 않았다. MSS에 비해 RS의 Cl(556,487.5~612,305.0 ppm) 함량이 높았으며, Br은 MSS(628.1 ppm)에서 더 높은 함량을 나타내었으나 $NO_3$는 모두 유의한 차이를 보이지 않았다. MSS에 비해 RS에서 Pb, As, Hg가 높게 나타났으나 Pb, As, Cd, Hg에서 기준치 이상의 검출은 없었다. MSS와 RS의 Co, Cu, Se, U는 차이가 없었으나 Li, Al, Mn, Fe, Sr은 RS에서 더 높은 함량을 나타내었으며, Mn은 굽는 시간 경과에 따라 감소하는 경향을 나타내었다. 이상의 결과에서 볼 때 MSS와 RS에서 인체에 유해한 영향을 미치는 이산화황 발생은 없었으며, RS 시간 경과에 따른 이산화황 발생도 없는 것으로 나타났다. 중금속의 위해성은 안전 수준이며, 이외 발생될 수 있는 잠재적인 위해성에 대한 관심이 필요할 것으로 판단된다.

• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.799-805
• /
• 2001

상용 알루미나 분말(0.5${\mu}$m, 3${\mu}$m)을 die-press법을 이용하여 1120$^{\circ}$C에서 2시간 1차 소결하여 다공성 전성형체를 제조하고 1100$^{\circ}$C에서 4시간 $La_2O_3-Al_2O_3-SiO_2$계 유리를 용융 침투시켜 치밀한 유리-알루미나 복합체를 제조하였다. 알루미나 입도가 유리-알루미나 복합체의 충진율, 미세조직, 젖음성, 기공률 및 크기, 기계적 특성에 미치는 영향을 조사하였다. 입도 범위가 0.1∼48${\mu}$m로 넓고 bimodal size 입도 분포를 가지면서 random orientation을 가진 3${\mu}$m 알루미나가 분산된 복합체가 최적의 기계적 특성 및 충진률이 관찰되었으며 강도와 인성값은 각각 519MPa, $4.5MPa{\cdot}m^{1/2}$이었다.

• 한국동물학회지
• /
• 제12권3호
• /
• pp.94-102
• /
• 1969

盛熱한 albino 雄性 흰쥐를 對照群과 實驗群으로 나누어 對照群에는 0.9% 生理食鹽水를, 實驗群에는 methylene blue(38mg/kg, 食鹽水에 溶解 pH 7.4)를 各各 腹腔注射處理하였다. 約 30 分後 兩群 共히 總線量 360 rads 인 $^60 Co$의 r 線을 一時 全身照射하였다. 照射後 212時間에 걸쳐 血淸總乳酸脫水素酵素의 含量(Cabaud and Droblewski 1958)과 血淸을 비롯하여 肝, 心臟, 精巢組織의 乳酸脫水素酵素의 同位酵素vnfortys(Preston et al., 1965)을 各各 測定하여 methylene blue 의 放射線에 對한 防禦　果를 硏究調査하였다. 一般的으로 血淸總乳酸脫水素酵素의 含量은 兩群共히 r 線照射後 初期에 增加하나 特히 methylene blue 實驗群인 處理群은 對照群인 生理食鹽水群에 比하여 15 및 64 時間區에서 增加의 遲滯性을 나타내었다. 血淸과 肝, 心臟 및 精巢組織의 乳酸脫水素酵素의 同位酵素는 兩群共히 線照射後 40과 116 時間區에서 陽極쪽의 同位酵素 푸랙숀 含量은 減少한다. 照射群 methylene blue 處理群의 血淸과 肝 및 精巢組織 乳酸脫水素酵素의 同位酵素패턴에서는 對照群과 別差異가 없었으나 特히 methylene blue 處理群의 心臟組織은 對照群에 比하여 若干의 增減의 遲滯性을 나타내었다. 兩群共히 照射後 血淸乳酸脫水素酵素含量의 增加는 同位酵素푸랙숀 1의 增加에 基因된다고 思料되며 이상의 結果로 미루어 보아 總乳酸脫水素酵素 活性과 心臟組織의 乳酸脫水素酵素의 同位酵素패턴에 있어서 methylene blue가 放射線防禦　果가 있는 것으로 思料된다.

• 한국대기환경학회지
• /
• 제21권1호
• /
• pp.119-129
• /
• 2005

The ambient TSP data measured at Seoul, Incheon. Taean, Daegu, Busan in Korea were used to explain the chemical composition and general features of Asian Dust (AD) observed in Korea. 9 episodes out of 19 were sampled from 2000 through May 2002, and measurements were conducted covering ionic and metal components with mass concentration. The results showed that daily averaged mass concentration (TSP) during the AD episodes was 458 $\mu\textrm{g}$/㎥, and ionic and metal concentrations were 27.93 $\mu\textrm{g}$/㎥ and 71.7 $\mu\textrm{g}$/㎥, respectively, accounting for 6.1 % and 15.5% of the total aerosol mass. TSP concentrations during episodes were varied from 120 to 1742 $\mu\textrm{g}$/㎥ according to the impact of Asian Dusts and had a tendency of showing higher values at sites in the west side of Korea, which can be explained by the effect of diffusion and deposition. In this study, ionic components like Ca (NO$_3$)$_2$, CaSO$_4$, NaNO$_3$, Na$_2$SO$_4$ were prominent types in secondary aerosol during AD periods and also indicated that V, Co as well as soil elements such as Ca, Fe, Mg, Mn, K correlated well with Al, while Cu, Cd, Pb, Zn didn't agree well with it. In addition, enrichment factors (EFs) for each metal component were obtained to provide simple information about source contribution of Asian Dust, and the results were compared with those from other AD studies. In this study, the results showed that aerosol properties in Korea during the Asian Dust were considerably different from those of general atmospheric condition and specially varied from case to case rather than site to site, which implies that there are certain variations in the soil of source region, pathways of air mass, and meteorological condition. For the enhanced study, those factors should be combined with the features of Asian Dust resolved from this study.

• 한국환경과학회지
• /
• 제22권7호
• /
• pp.787-799
• /
• 2013

The aim of this study was to investigate the accumulation of metallic elements and the control effect of marine pollution caused by ocean dumping in the sediments at a waste disposal area in the Yellow Sea. In July 2009, concentrations of organic matter and metallic elements (Al, Fe, As, Cd, Cr, Co, Hg, Ni, Mn, Pb, and Zn) were measured in surface sediments at the site. The ignition loss (IL) in the surface sediments showed a mean value of 15.4%, about 1.5 times higher than the mean value of the sediments in the coastal areas of Korea. The chemical oxygen demand (COD) at some disposal sites exceeded 20 mg $O_2/g{\cdot}dry$, which signifies the initial concentration of marine sediment pollutants in Japan. The disposal sites contain higher concentrations of Cr, Cu and Zn than the sediments of bays and estuaries that might be contaminated. The magnitude of both metal enrichment factors (EF) and adverse biological effects suggest that pollution with Cr and Ni occurred due to the dumping of waste in the study area. In addition, the geoaccumulation index (Igeo) showed that the surface sediments were moderately contaminated. By the mid-2000s, when the amount of waste dumped at this site was the highest, the concentration of metallic elements was higher than ever recorded. On the other hand, in 2008-09, the need for environmental management was relatively low compare with the peak. As a result, the quality of marine sediment has been enhanced, considering the effect of waste reduction and natural dilution in the disposal area.

• 한국광학회지
• /
• 제24권5호
• /
• pp.224-230
• /
• 2013

레이저 리프트 오프(Laser Lift-Off: LLO)는 수직형 LED 제조를 위하여 GaN 또는 AlN 박막을 사파이어 웨어퍼로부터 레이저를 이용하여 제거하는 공정으로 광원, 레이저의 출력 파워를 조절해주는 감쇠기, 빔의 형태를 잡아주는 빔 성형 광학계, 원하는 빔 사이즈를 만들어 주고 빔을 균일하게 섞어주는 빔 균일 광학계, 기판에 투사 이전에 빔을 한번 잘라주는 조리개 부분과 마스크 단에서 잘린 빔을 기판에 투사해주는 투사렌즈 부분으로 구성되어 있다. 본 논문에서는 LLO 시스템을 구성하고 있는 광학계 중 감쇠기와 투사렌즈 부분의 설계 및 분석을 진행하였다. 투사렌즈의 $7{\times}7mm^2$ 빔 사이즈 구현을 위하여 광학 설계 프로그램인 지맥스를 통해 설계 및 초점심도를 분석하였으며, 조명 설계 프로그램인 라이트 툴을 사용하여 빔 사이즈 및 균일도를 분석하였다. 성능 분석 결과 사각형 빔의 크기 $6.97{\times}6.96mm^2$, 균일도 91.8%, 초점심도 ${\pm}30{\mu}m$를 확인하였다. 또한 고출력의 엑시머레이저의 빔 강도를 감쇠시키기 위한 장치인 감쇠기의 투과율을 높이기 위하여 에센설 맥클라우드 코팅 프로그램을 사용하여 유전체 코팅을 실시한 결과 총 23층의 박막과 s 편광의 입사각도 $45{\sim}60^{\circ}$에서 10-95%의 투과율을 확인 할 수 있었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권5호
• /
• pp.405-418
• /
• 2007

Mesenchymal stem cells(MSCs) have been though to be multipotent cells that can replicate that have the potential to differentiate into lineages of mesenchymal tissue including the bone, cartilage, fat, tendon, muscle, and marrow stroma. Especially, scaffolds to support cell-based tissue engineering are critical determinants of clinical efforts to regenerate and repair the body. Selection of a matrix carrier imvolves consideration of the matrix's role as a scaffold for physical support and host tissue integration as well as its ability to support of synergize the osteoinductive program of the implanted mesenchymal stem cell. The aim of this study is to evaluate the effect of autobone and Bio-$Oss^{(R)}$ to adherent mesenchymal stem cells as scaffolds on sinus augmentation with fibrin glue mixture in a rabbit model. 16 New Zealand White rabbits were divided randomly into 4 groups based on their time of sacrifice(1, 2, 4 and 8 weeks). First, mesenchymal stem cells were isolated from iliac crest marrow of rabbits and expanded in vitro. Cell culture was performed in accordance with the technique described by Tsutsumi et al. In the present study, the animals were sacrificed at 1, 2, 4 and 8 weeks after transplantation, and the bone formation ability of each sides was evaluated clinically, radiologically, histologically and histomorphologically. According to the histological observations, autobone scaffolds group showed integrated graft bone with host bone from sinus wall. At 2 and 4 weeks, it showed active newly formed bone and neovascularization. At 8 weeks, lamellae bone was observed in sinus graft material area. Radiologically, autobone with stem cell showed more radiopaque than Bio-$Oss^{(R)}$ scaffolds group. there were significant differences in bone volume between 4 and 8 weeks(p<0.05).

• 한국재료학회지
• /
• 제17권5호
• /
• pp.256-262
• /
• 2007

Effects of interlayer and the combination of different coating methods on the mechanical and corrosion behaviors of TiN and CrN coated on 420 stainless steel have been studied. STS 420 specimen were tempered at $300^{\circ}C$ for 1 hr in vacuum furnace. The TiN and CrN thin film with 2 ${\mu}m$ thickness were coated by arc ion plating and DC magnetron sputtering following the formation of interlayer for pure titanium and chromium with 0.2 ${\mu}m$ thickness. The microstructure and surface analysis of the specimen were conducted by using SEM, XRD and roughness tester. Mechanical properties such as hardness and adhesion also were examined. XRD patterns of TiN thin films showed that preferred TiN (111) orientation was observed. The peaks of CrN (111) and $Cr_2N$ (300) were only observed in CrN thin films deposited by arc ion plating. Both TiN and CrN deposited by arc ion plating had the higher adhesion and hardness compared to those formed by magnetron sputtering. The specimen of TiN and CrN on which interlayer deposited by magnetron sputtering and thin film deposited by arc ion plating had the highest adhesion with 22.2 N and 19.2 N. respectively. TiN and CrN samples shown the most noble corrosion potentials when the interlayers were deposited by using magnetron sputtering and the metal nitrides were deposited by using arc ion plating. The most noble corrosion potentials of TiN and CrN were found to be approximately -170 and -70 mV， respectively.

• 한국재료학회지
• /
• 제26권3호
• /
• pp.117-122
• /
• 2016

White organic light-emitting diodes with a structure of indium-tin-oxide [ITO]/N,N-diphenyl-N,N-bis-[4-(phenylm-tolvlamino)-phenyl]-biphenyl-4,4-diamine [DNTPD]/[2,3-f:2, 2-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile [HATCN]/1,1-bis(di-4-poly-aminophenyl) cyclo -hexane [TAPC]/emission layers doped with three color dopants/4,7-diphenyl-1,10-phenanthroline [Bphen]/$Cs_2CO_3$/Al were fabricated and evaluated. In the emission layer [EML], N,N-dicarbazolyl-3,5-benzene [mCP] was used as a single host and bis(2-phenyl quinolinato)-acetylacetonate iridium(III) [Ir(pq)2acac]/fac-tris(2-phenylpyridinato) iridium(III) $[Ir(ppy)_3]$/iridium(III) bis[(4,6-di-fluoropheny)-pyridinato-N,C2] picolinate [FIrpic] were used as red/green/blue dopants, respectively. The fabricated devices were divided into five types (D1, D2, D3, D4, D5) according to the structure of the emission layer. The electroluminescence spectra showed three peak emissions at the wavelengths of blue (472~473 nm), green (495~500 nm), and red (589~595 nm). Among the fabricated devices, the device of D1 doped in a mixed fashion with a single emission layer showed the highest values of luminance and quantum efficiency at the given voltage. However, the emission color of D1 was not pure white but orange, with Commission Internationale de L'Eclairage [CIE] coordinates of (x = 0.41~0.45, y = 0.41) depending on the applied voltages. On the other hand, device D5, with a double emission layer of $mCP:[Ir(pq)_2acac(3%)+Ir(ppy)_3(0.5%)]$/mCP:[FIrpic(10%)], showed a nearly pure white color with CIE coordinates of (x = 0.34~0.35, y = 0.35~0.37) under applied voltage in the range of 6~10 V. The luminance and quantum efficiency of D5 were $17,160cd/m^2$ and 3.8% at 10 V, respectively.