• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.546-549
• /
• 2007

As a rule, high temperature superconducting coated conductors have multi-layered buffers consisting of seed, diffusion barrier and cap layers. Multi-buffer layer deposition requires longer fabrication time. This is one of main reasons which increases fabrication cost. Thus, single buffer layer deposition seems to be important for practical coated conductor process. In this study, a single layered buffer deposition of $CeO_2$ for low cost coated conductors has been tried using thermal evaporation technique. 100 nm-thick $CeO_2$ layers deposited by thermal evaporation were found to act as a diffusion layer. $1\;{\mu}m-thick$ SmBCO superconducting layers were deposited by thermal co-evaporation on the $CeO_2$ buffered Ni-5%W substrate. Critical current of 90 A/cm was obtained for the SmBCO coated conductors.

• 공업화학
• /
• 제26권3호
• /
• pp.319-325
• /
• 2015

분무열분해법을 이용하여 서브 미크론 크기의 $CeO_2:Er^{3+}/Yb^{3+}$ 상향 변환 형광체 입자를 합성하고 $Er^{3+}$ 및 $Yb^{3+}$ 농도 변화에 따른 발광특성을 조사하였다. 합성한 $CeO_2:Er^{3+}/Yb^{3+}$는 $Er^{3+}$ 활성이온의 $^4S_{3/2}/^2H_{11/2}{\rightarrow}^4I_{15/2}$ 및 $^4F_{9/2}{\rightarrow}^4I_{15/2}$ 전이에 기인한 강한 녹색 및 적색 발광을 보였다. 가장 높은 발광을 보이는 활성제 농도는 Er = 1.0% 그리고 Yb = 2.0%이며, 농도소광 현상은 쌍극자-쌍극자 상호작용을 통해 일어남이 확인되었다. 레이저 다이오드 여기 광 세기에 대한 발광강도 의존성을 활성이온 농도에 따라 조사하였고, 발광 중간 에너지 레벨의 주 소멸과정을 고려하여 발광 메커니즘을 조사하였다. $Yb^{3+}$에서 $Er^{3+}$으로 에너지 전달은 바닥 상태 흡수(ground state absorption, GSA)에 기여하고, $Yb^{3+}$ 도핑은 $^4I_{11/2}{\rightarrow}^4I_{13/2}$ 전이를 가속화시켜 적색/녹색 발광세기 비를 상승시킨다. 최종적으로 분무열분해법으로 제조된 $CeO_2:Er^{3+}/Yb^{3+}$ 형광체의 발광은 선형 감쇠가 중간 에너지 레벨의 고갈을 지배하는 2 광자 프로세스에 의해 일어남을 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.96-97
• /
• 2002

불순물을 이용한 비휘발성 홀로그램저장[1,2]은 기존의 열정착을 광정착으로 대치하는 방법으로서 여러 가지 희토류 혹은 전이금속이온을 첨가한 LiMbO$_3$ (LNO) 단결정 재료에서 시도되고 있다. 대표적인 재료로서 Mn,Fe：LNO 가 있으나 Mn,Ce：LNO, Cu,Co：LNO, Tb,Fe：LNO 등도 연구되고 있고 Stoichiometric LNO 경우엔 Pr：LNO, Er：LNO, Tb：LNO 등이 연구되고 있다. 그 외에 Mn：YAlO$_3$도 약하긴 하지만 비휘발성이 최근 보고되었다. (중략)

• Progress in Superconductivity
• /
• 제13권1호
• /
• pp.12-17
• /
• 2011

We investigated the effects of Ba and Cu co-substitution on the structural and superconducting properties of ($Ru_{1-y}Cu_y$)($Sr_{1.67-x}Ba_xEu_{0.33}$)($Eu_{1.34}Ce_{0.66}$)$Cu_2O_z$ samples. X-ray diffraction(XRD) reveals that single-phase samples can be obtained in the range from x = 0.1 to 0.2 for ($Ru_{0.5}Cu_{0.5}$)($Sr_{1.67-x}Ba_xEu_{0.33}$)($Eu_{1.34}Ce_{0.66}$)$Cu_2O_z$ and from y = 0.25 to 0.5 for ($Ru_{1-y}Cu_y$)($Sr_{1.47}Ba_{0.2}Eu_{0.33}$)($Eu_{1.34}Ce_{0.66}$)$Cu_2O_z$, respectively. All samples with compositions of ($Ru_{0.5}Cu_{0.5}$)($Sr_{1.67-x}Ba_xEu_{0.33}$) ($Eu_{1.34}Ce_{0.66}$)$Cu_2O_z$ (x = 0 - 0.33) show superconducting transition behavior and the onset transition temperature decreases slightly with increasing x in consistent with the change of hole concentration estimated from room temperature thermoelectric power measurements. The XRD and resistivity measurements for the ($Ru_{1-y}Cu_y$)($Sr_{1.47}Ba_{0.2}Eu_{0.33}$)($Eu_{1.34}Ce_{0.66}$) $Cu_2O_z$ system indicate that the partial substitution of Cu for Ru is necessary to form phase pure samples, but result in a small change in transition temperature in the single-phase region from x = 0.25 to 0.5.

• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.115-120
• /
• 2016

저온용 SCR 촉매인 $MnO_x$의 촉매 활성을 높이기 위해 $TiO_2$ 지지체와 함께 조촉매로서 $CeO_2$을 사용하였고, 제조된 나노 사이즈의 촉매 특성과 함께 질소산화물 제거 효율에 대해 고찰하였다. $MnO_x-CeO_2/TiO_2$ 촉매 내에서 $CeO_2$ 거동을 확인하기 위해 단일 조성의 $CeO_2$와의 차이점을 미세구조적으로 비교 분석하였다. $MnO_x-CeO_2/TiO_2$ 촉매가 졸겔법을 통해 제조되었으며 낮은 열적 특성으로 인해 평균 $285{\mu}m$ 정도의 큰 입도를 가진 단일 $CeO_2$와는 달리 Ti 지지체와 함께 합성된 촉매의 경우 130 nm 정도로 줄어들었음을 확인하였다. 투과 전자 현경을 이용한 EDS mapping를 통해 Ce-Ti의 강한 interaction이 nano-sized powder 제조의 원인인 것으로 확인하였다. 조촉매 첨가로 인해 $MnO_x/TiO_2$ 촉매에 비해 저온영역에서 20 % 이상의 효율 향상이 있었으며 이는 3성분계 촉매 내에서 $CeO_2$가 나노 사이즈로 잘 분산됨에 따라 촉매 반응에 필요한 산소이온의 교환이 활발히 일어날 수 있었기 때문이다.

• 세라미스트
• /
• 제21권4호
• /
• pp.378-387
• /
• 2018

The optimal fabrication conditions for $Gd_{0.1}Ce_{0.9}O_{2-{\delta}}$(GDC) buffer layer and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF) cathode on 1mol% $CeO_2-10mol%\;Sc_2O_3$ stabilized $ZrO_2$ (CeScSZ) electrolyte were investigated for application of IT-SOFCs. GDC buffer layer was used in order to prevent undesired chemical reactions between LSCF and CeScSZ. These experiments were carried out with $5{\times}5cm^2$ anode supported unit cells to investigate the tendencies of electrochemical performance, Microstructure development and interface reaction between LSCF/GDC/CeScSZ along with the variations of GDC buffer layer thickness, sintering temperatures of GDC and LSCF were checked, respectively. Electrochemical performance was analyzed by DC current-voltage measurement and AC impedance spectroscopy. Microstructure and interface reaction were investigated by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Although the interfacial reaction between these materials could not be perfectly inhibited, We found that the cell, in which $6{\mu}m$ GDC interlayer sintered at $1200^{\circ}C$ and LSCF sintered at $1000^{\circ}C$ were applied, showed good interfacial adhesions and effective suppression of Sr, thereby resulting in fairly good performance with power density of $0.71W/cm^2$ at $800^{\circ}C$ and 0.7V.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.57-64
• /
• 2020

The water-gas shift reaction for the compact reformer was carried out at a gas hourly space velocity of 72,152 h^-1 over the Cu-Nb-CeO₂ catalysts prepared by co-precipitation method. In order to investigate the effect of Nb₂O₅ promotion over a Cu-CeO₂ catalyst, the Nb₂O₅ loading amount was systematically changed from 0 to 5 wt.%. Among the prepared catalysts, the Cu-Nb-CeO₂ (1%) catalyst showed the highest catalytic activity (CO conversion=61% at 400℃) as well as 100% CO₂ selectivity. The high activity and stability of Cu-Nb-CeO₂ (1%) catalyst are correlated to high Brunauer-Emmett-Teller surface area, small metallic Cu crystallite size, and enhanced redox property.

• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.764-768
• /
• 2002

산화물의 금속 전구체인 $Ce(OH)_4$를 희석제인 NaCl과 함께 기계적으로 분쇄하여 나노 크기의 일차입자를 제조하고, 분쇄한 전구체 분말은 희석제와 함께 열처리를 하여 나노 결정립의 $CeO_2$를 합성하였다. 희석제는 전구체의 분쇄시 분말의 재응집을 억제하여 분쇄효율을 증진시켰을 뿐만 아니라 열처리 중에는 일차입자 성장과 응집을 억제하여 열처리 온도와 시간에 따라 일차입자의 크기 뿐만 아니라 응집체으 크기도 제어할 수 있었다. 열처리 중 희석제는 고온에서 전구체 표면에서 치밀화 되어 일차입자 성장과 응집체 형성의 확산장벽으로 작용하는 것으로 판단되며 열처리 후 증류수에 쉽게 용해되어 $CeO_2$ 나노 입자 제조에 효과적이었다. 일차입자와 응집체의 크기 및 결정성은 희석제의 농도, 열처리 온도와 시간에 의존하는 것으로 확인 되었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2835-2840
• /
• 2010

A series of $MoO_3/CeO_2-ZrO_2$ catalysts with different Mo content (8 - 20 wt %) were prepared by simple co-precipitation followed by impregnation method and were characterized by X-ray diffraction (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), energy dispersive spectroscopic (EDS) techniques. The prepared materials were tested for catalytic activity by the synthesis of benzimidazole derivatives using condensation of aromatic aldehydes and o-phenylenediamine by conventional and microwave method. Obtained results reveal that the catalytic activity increases with increase in Mo wt % loading. The best catalytic activity was obtained with 20 wt % $MoO_3/CeO_2-ZrO_2$. The particle size or crystallite size was estimated using Debye-Scherrer equation. After completion of reaction, the catalyst can be recovered efficiently and reused with consistent activity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.140.2-140.2
• /
• 2013

Strong metal-support interaction effect is an important issue in determining the catalytic activity for heterogeneous catalysis. In this work, we report the catalytic activity of $Au/TiO_2$, $Au/Al_2O_3$, and $Au/Al_2O_3-CeO_2$ nanocatalysts under CO oxidation fabricated by arc plasma deposition (APD), which is a facile dry process with no organic materials involved. These catalytic materials were characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and $N_2$-physisorption. Catalytic activity of the materials has measured by CO oxidation using oxygen, as a model reaction, in a micro-flow reactor at atmospheric pressure. Using APD, the catalyst nanoparticles were well dispersed on metal oxide powder with an average particle size (3~10 nm). As for catalytic reactivity, the result shows $Au/Al_2O_3-CeO_2$ nanocatalyst has the highest catalytic activity among three samples in CO oxidation, and $Au/TiO_2$, and $Au/Al_2O_3$ in sequence. We discuss the effects of structure and metal-oxide interactions of the catalysts on catalytic activity.