• Journal of Environmental Science International
• /
• v.27 no.10
• /
• pp.865-874
• /
• 2018

Fruit trees are a key part of agriculture in rural areas and have recently been a part of ecotourism or agrotourism. This study analyzes user segmentation based on user motivation to determine characteristics of potential customers in fruit tree farms, and thereby develop fruit tree experience and educational programs. We conducted a survey of 253 potential customers of fruit tree experience programs in September 2017. Data were evaluated using factor and cluster analyses. The results of the cluster analysis identified four distinct segments based on potential customers' motivations, that is, activity-oriented, learning-oriented, leisure-oriented, and purchase-oriented. These clusters showed that significant differences in the preference of potential customers exist. Different markets were segmented based on the benefits sought by users. The segments' characteristics were identified and activities relevant to each segment were proposed for rural tourism. Lastly, this study suggests directions for development of fruit tree farm experience and educational programs.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.39-45
• /
• 2014

This paper proposes an architecture of a sensor network for gathering data under a powerful beam cluster tree architecture. This architecture is used when there is a need to gather data from sensor node where there is no sink node connected to an existing network, or it is required to get a series of data specific to an event or time. The transmit distance of the beam signal is longer than that of the usual sensor node. The nodes of the network make a tree network when receiving a beam message transmitting from the powerful root node. All sensor nodes in a sink tree network synchronize to the superframe and know exactly the sequence value of the current superframe. When there is data to send to the sink node, the sensor node sends data at the corresponding allocated channel. Data sending schemes under the guaranteed time slot are tested and the delay and jitter performance is explained.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.143-150
• /
• 1999

The purpose of this research is to find som ways to model tree forms more efficiently in reference with surveying structural data and handling parameters in plant Editor of AccuRender, the AutoCAD-based rendering software adopting the procedural plant modeling technique. In case of modelling a new tree, because it is efficient to modify an existing tree data as a template, we attempted to classify 81 species' data from existing plant library including conifers and deciduous tree. According to the qualitative characteristics and quantitative parameters of geometrical and branching structure, 8 types of tree form were classified with factor and cluster analysis. Some critical aspects found in the distributions of standardized scores of parameters in each type were discussed for explaining the tree forms intuitively. For adaptability of the resulted classification and typical parameters, 10 species of tree were measured and modelled, and proved to be very similar to the real structures of tree forms. CG or CAD-based plant modelling technique would be recommended not only as a presentation tool but for planting design, landscape simulation and assessment.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.846-856
• /
• 2016

Wireless sensor networks (WSNs) are widely applied in monitoring and control of environment parameters. It is sometimes necessary to disseminate data through wireless links after they are deployed in order to adjust configuration parameters of sensors or distribute management commands and queries to sensors. Several approaches have been proposed recently for data dissemination in WSNs. However, none of these approaches achieves both high efficiency and low complexity simultaneously. To address this problem, cluster-tree based network architecture, which divides a WSN into hierarchies and clusters is proposed. Upon this architecture, data is delivered from base station to all sensors in clusters hierarchy by hierarchy. In each cluster, father broadcasts data to all his children with instantly decodable network coding (IDNC), and a novel scheme targeting to maximize total transmission gain (MTTG) is proposed. This scheme employs a new packet scheduling algorithm to select IDNC packets, which uses weight status feedback matrix (WSFM) directly. Analysis and simulation results indicate that the transmission efficiency approximate to the best existing approach maximum weight clique, but with much lower computational overhead. Hence, the energy efficiency achieves both in data transmission and processing.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.1 s.11
• /
• pp.3-17
• /
• 2004

With the rapid growth of the Internet geographic information services through the WWW such as a location-based service and so on. Web GISs (Geographic Information Systems) have also come to be a cluster-based architecture like most other information systems. That is, in order to guarntee high quality of geographic information service without regard to the rapid growth of the number of users, web GISs need cluster-based architecture that will be cost-effective and have high availability and scalability. This paper proposes the design of the cluster-based web GIS with high availability and scalability. For this, each node within a cluster-based web GIS consists of main memory spatial databases which accomplish role of caching by using data declustering and the locality of spatial query. Not only simple region queries but also the proposed system processed spatial join queries effectively. Compare to the existing method. Parallel R-tree spatial join for a shared-Nothing architecture, the result of simulation experiments represents that the proposed spatial join method achieves improvement of performance respectively 23% and 30% as data quantity and nodes of cluster become large.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.209-214
• /
• 2007

In this paper, we proposed a new MANET (Mobile Ad hoc Networks) technology of routing protocol. The MANET has a mobility formation of mobile nodes in the wireless networks. Wireless network have two types architecture: the Tree based multicast and shared tree based. The two kind's architecture of general wireless networks have difficult to solve the problems existing in the network, such as connectivity, safety, and reliability. For this purpose, as using that ADDMRP (Ad hoc network Doppler effect-based for Dynamic Multicast Routing Protocol), this study gives the following suggestion for new topology through network durability and Omni-directional information. The proposed architectures have considered the mobility location, mobility time, density, velocity and simultaneous using node by Doppler effects and improved the performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1328-1336
• /
• 2012

Compared to terrestrial RF communications, underwater acoustic communications have several limitations such as limited bandwidth, high level of fading effects, and a large underwater propagation delay. In this paper, in order to tackle those limitations of underwater communications and to make it possible to form a large underwater monitoring systems, we propose a hierarchical underwater network architecture, which consists of underwater sensors, clusterheads, underwater/surface sink nodes, autonomous underwater vehicles (AUVs). In the proposed architecture, for the maximization of packet delivery ratio and the minimization of underwater sensor's energy consumption, a hybrid routing protocol is used. More specifically, cluster members use Tree based routing to transmit sensing data to clusterheads. AUVs on optimal trajectory movements collect the aggregated data from clusterhead and finally forward the data to the sink node. Also, in order to minimize the maximum travel distance of AUVs, an Integer Linear Programming based algorithm is employed. Performance analysis through simulations shows that the proposed architecture can achieve a higher data delivery ratio and lower energy consumption than existing routing schemes such as gradient based routing and geographical forwarding. Start after striking space key 2 times.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.117-121
• /
• 2008

In ad hoc network, the scarce energy management of the mobile devices has become a critical issue in order to extend the network lifetime. Therefore, the energy consumption is important in the routing design, otherwise cluster schemes are efficient in energy conserving. For the above reasons, an Energy conserving Context aware Clustering algorithm (ECC) is proposed to establish the network clustering structure, and a routing algorithm is introduced to choose the Optimal Energy Routing Protocol (OERP) path in this paper. Because in ad hoc network, the topology, nodes residual energy and energy consuming rate are dynamic changing. The network system should react continuously and rapidly to the changing conditions, and make corresponding action according different conditions. So we use the context aware computing to actualize the cluster head node, the routing path choosing. In this paper, we consider a novel routing protocol using the cluster schemes to find the optimal energy routing path based on a special topology structure of Resilient Ontology Multicasting Routing Protocol (RODMRP). The RODMRP is one of the hierarchical ad hoc network structure which combines the advantage of the tree based and the mesh based network. This scheme divides the nodes in different level found on the node energy condition, and the clustering is established based on the levels. This protocol considered the residual energy of the nodes and the total consuming energy ratio on the routing path to get the energy efficiently routing. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.653-656
• /
• 2000

본 논문에서는 공간데이터의 병렬성을 고려한 클러스트 시스템을 제안하였다. 클러스트 시스템의 큰 단점인 다단계 프로토콜 스택에서 오는 메시지 전송 부하를 줄인 VIA(Virtual Interface Architecture)를 기반으로 클러스트 시스템을 구성하고 저장 서버들간에는 공간데이터의 지역성에 기반하여 데이터를 배치하며 저장 서버들 내에서는 공간 데이터의 병렬성을 고려하여 EPR(Enhanced Parallel R-tree)로 데이터를 배치하였다. 위의 클러스트 시스템을 기반으로 적절한 전송 데이터 크기와 전송 횟수를 구하기 위한 실험을 실시하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1214-1221
• /
• 2007

Ad-hoc network is soft wireless communication network that is consisted of mobile node and clusters without helping of infrastructure. We propose a new ad hoc multicast routing protocol for based on the ontology scheme called inference network. Ontology knowledge-based is one of the structure of context-aware. Proposed structure is consisted of context awareness parameters as like distance between each nodes. The proposed architecture performs two types of routing discovery. One is Flooding Discovery Routing(FDR) for comparing analysis step and Local Discovery Routing(LDR) to compose path of node forecast(preservation) step from node's state value. The inference network structure of proposed RODMRP(Resilient Ontology-based Dynamic Multicast Routing Protocol) adopts a tree structure to enhance an efficient packet in various environment between mobile node. We will have developed an algorithm that will desist multi-hierarchy Layered networks to simulate a desired system.