• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.5
• /
• pp.747-752
• /
• 2016

This study aimed to estimate the change of stress level in horses based on cortisol concentration levels in their saliva. A total of 61 horses were divided into the following three groups: i) tourist riding experience (TR, n = 23); ii) resting group (RR, n = 14); and iii) horse-riding education (ER, n = 24). The saliva samples of TR and ER groups were taken using plain cotton Salivettes four times a day: at 07:00 (basal), 11:00 (Exercise 1, after 1-hour exercise in the morning), 14:00 (Exercise 2, after 1-hour exercise in the afternoon), and 16:00 (Exercise 3, after 1-hour exercise in the afternoon). The saliva samples of RR were measured at the same time. The samples were analyzed using the SAS program general linear model procedure. In a percentage relative to the base value, cortisol levels in Exercise 3 were confirmed to decrease in all groups as compared to the basal value percentage in the following sequence: ER>TR>RR. The highest peak was confirmed in Exercise 2 (approximately 131%) of RR group and the lowest peak appeared in Exercise 3 (approximately 52%) of ER group. Therefore, resting without any particular exercise can also increase the stress level of horses. Thus, it is better to exercise, as exercise can reduce the stress level, even in cases when riders are clumsy or lack appropriate horse-riding experience. The results of the present study are useful to equestrian center owners and educational riding instructors in that they provide a meaningful insight into a better horse management.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.11-25
• /
• 2015

This study analyzed features in contemporary men's collection to provide data for characteristics of kitsch in men's collection. The research method was to see background of the concept of kitsch through the domestic and international publications, the Internet, paper. Five designers' collections that have characteristics of kitsch were selected. The range of collection is from the 2000 S/S to 2011 F/W in Men's collection. The results are as follows: kitsch characteristics could be classified by amusements, inappropriateness, satire. First, exaggerative amusements in men's collection appeared exaggerated form, large size, which is ridiculous at the same time. Infantile amusements represents the image of a pure concentric matching accessories such as toys to the children express. sensual amusements reveals the sexual instincts and desires and people can feel satisfaction through sensual amusements. Second, inappropriateness is characteristic of kitsch to escape from normal life. Clothing does not fit the body and destroyed the design or design of this feature appears. It looks clumsy and strange. Inappropriateness characteristic in men's collection can be divided into inadequate performance and sexual inappropriateness. Third, satire can be divided into resistant satire, imitative satire, and popular satire. Resistance satire with anti-social tendencies through their clothing is achieved by expressing their needs. It was affected by sub-culture like Hippie or Punk. Imitative satire is to imitate other culture, customs and race. It is to resolve complaints through the consumption of things in disparities of wealth and materialism in the society. Popular satire is to express emotions that are free using materials that can recycling like can, bottle or paper.

• Journal of the Korea Furniture Society
• /
• v.17 no.3
• /
• pp.95-111
• /
• 2006

These series articles were written in order to understand rockers of today and to provide basic data of their designs and manufacture studying pattern changes in the West. In the first article of the series reports we already described the theoretical background of rockers and the Windsor and the Boston style among the American classic rockers from the eighteenth to the twentieth century. This article contained the characteristics of the styles of the Shaker rocker, the Wicker rocker, and the Platform rocker. The three periods associated with furnituremaking in the Shaker sect are; the Primitive Era, which lasted from 1790 to 1820; the Classical Era, from 1820 to 1860; and the Final Phase, from 1860 to 1935. The important skills the Shaker needed to make the Shaker rocker are woodturning joinery, seat braid weaving and steam bending for the slats. The Wicker rocker continues to be extremely popular furniture style as the wicker proved equally effective for translating the ornate vine-like motifs popular among Art Nouveau proponents. The Wicker rockers were developed for child's, gentleman's and lady's, and it represents the most diverse forms among the above mentioned styles. However the rocker skates were often clumsy and took up too much room, preventing the chair from being shoved close to the wall and out of the way. These problems were overcome by the Platform rocker. The most important innovation was the technical development of a stationary base, which allowed the chair to rock noiselessly, without skating along the floor. The Modernism of the modern furnitures in America and Europe were affected by the characteristics of the Shaker rocker, the Wicker rocker, and the Platform rocker.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.229-239
• /
• 2020

The purpose of this study was to help young people with mild intellectual disabilities with counseling and self-supporting life experiences. The topic of the counseling contents could be categorized as follows: "institutional life was clumsy and hard, but it was also full of memories," "my adolescent was aching, growing, and lonesome," "an irresistibie being," "independence process is filled with anxiety, excitement." In his process of going independent, the subject showed a strong will for the preparation for independence where he gets through the unfavorable situation surrounding the arduous and lonely independent process. This result proves the effectiveness of the therapeutic intervention based on the coping skills that meet the needs of the social situation for the adolescents who are discharged from institutions in their independence preparation and job search.

• English & American cultural studies
• /
• v.9 no.1
• /
• pp.185-219
• /
• 2009

This article aims to illuminate the comic characters and their humor in Dickens's novel David Copperfield in Bakhtinian point, and to clarify what the humorous characteristics are, and how they contribute to his reinforcement of socially critical messages in this novel. So far this novel has been called the only one of Dickens's comic novels, even though it includes lots of social critical meanings. But it is true that Dickensian critics couldn't make sure of the clear reasons why it is both very interesting and critical. Furthermore, it is also true that this novel has been criticized as a clumsy one in the realistic, psycho-analytic, dramatic angle. This approach to Dickensian comic characters through Bakhtinian fool, clown, and rogue concepts here could make up for or correct such criticisms, and reevaluate Dickens's humor and social criticisms in the context of general public culture. Bakhtin believes oppression by social ideologies prevent us from having good mutual relationships and divides our society. He thinks laughter liberates us from such oppression and restores our good relationships. As he applied his concepts based on the laughter of Middle Ages to Rabelais's novels, and examined what the authentically liberating power in Rabelais's laughter is, this article could clarify the liberating power of laughter by Dickens's comic characters, such as Mr and Mrs Micawber, Dick, Miss Betsey Trotwood and Miss Mowcher. In this novel, they often lead comic happenings, and such happenings are very similar to carnival-amusements including burning the dummy of the czar who has oppressed his or her citizenry. Especially, Dickens's comic characters's social criticisms, in the case of this novel, contain many complaints of social marginers, even though he has been labelled as being conservative politically. They always criticize the ideological absurdities in their society through the humorous words and behaviors in their comic happenings, like those of a carnival fool or clown in his or her amusements. This shows Dickens achieves both laughter and social criticism in David Copperfield by using Rabelaisian characterization-devices based on his general public culture. Like Bakhtin and Rabelais, Dickens seems to have believed that when we all truly liberate ourselves from the oppression of social ideologies, we can have desirable relationships between ourselves, and also solve social problems positively.

• Coupled systems mechanics
• /
• v.11 no.5
• /
• pp.439-458
• /
• 2022

Over-coating is one of the most popular engineering practices to strengthen Reinforced Concrete (RC) structures, due to the relative quickness and ease of construction. It consists of an external coat bonded to the outer surface of the structural RC element, either by the use of chemical adhesives, mechanical anchor bolts or simply mortar injection. In contrast to these constructive advantages, the numerical estimation of the bearing capacity of the strengthened reinforced concrete element is still complicated, not only for the complexity of modelling a flexible membrane or plate attached to a quasi-rigid solid, but also for the difficulties that raise of simulating any potential delamination between both materials. For these reasons, the standard engineering calculations used in the practice remain very approximated and clumsy. In this work, we propose the formulation of a new 2D solid-layer finite element capable to link a solid body with a flexible thin layer, as it were the "skin" of the body, allowing the potential delamination between both materials. In numerical terms, this "skin" element is intended to work as a transitional region between a solid body (modelled with a classical formulation of a standard quadrilateral four-nodes element) and a flexible coat layer (modelled with cubic beam element), dealing with the incompatibility of Degrees-Of-Freedom between them (two DOF for the solid and three DOF for the beam). The aim of the solid-layer element is to simplify the mesh construction of the strengthened RC element being aware of two aspects: a) to prevent the inappropriate use of very small solid elements to simulate the coat; b) to improve the numerical estimation of the real bearing capacity of the strengthened element when the coat is attached or detached from the solid body.

• Coupled systems mechanics
• /
• v.12 no.6
• /
• pp.481-501
• /
• 2023

Over-coating is one of the most popular engineering practices to strengthen Reinforced Concrete (RC) structures, due to the relative quickness and ease of construction. It consists of an external coat bonded to the outer surface of the structural RC element, either by the use of chemical adhesives, mechanical anchor bolts or simply mortar injection. In contrast to these constructive advantages, the numerical estimation of the bearing capacity of the strengthened reinforced concrete element is still complicated, not only for the complexity of modelling a flexible membrane or plate attached to a quasi-rigid solid, but also for the difficulties that raise of simulating any potential delamination between both materials. For these reasons, the standard engineering calculations used in the practice remain very approximated and clumsy. In this work, we propose the formulation of a new 2D solid-layer finite element capable to link a solid body with a flexible thin layer, as it were the "skin" of the body, allowing the potential delamination between both materials. In numerical terms, this "skin" element is intended to work as a transitional region between a solid body (modelled with a classical formulation of a standard quadrilateral four-nodes element) and a flexible coat layer (modelled with cubic beam element), dealing with the incompatibility of Degrees-OfFreedom between them (two DOF for the solid and three DOF for the beam). The aim of the solid-layer element is to simplify the mesh construction of the strengthened RC element being aware of two aspects: a) to prevent the inappropriate use of very small solid elements to simulate the coat; b) to improve the numerical estimation of the real bearing capacity of the strengthened element when the coat is attached or detached from the solid body.

• Management & Information Systems Review
• /
• v.17
• /
• pp.191-214
• /
• 2005

Recently, most enterprises are having a knowlege management boom. A number of books associated with the knowlege management are being published, countless public seminars are held, and many research councils have been organized studying it formally or informally as if not importing the system is like falling behind a fashion. However, there are not many cases that achieved success by constructing the system of knowledge management. Then, why the knowledge management is not so much effective despite so many voices wanting the change of management system and a lot of public lectures about it? I guess the reason is that most companies do not have concrete methodology. Seeing a result of a survey which reported that with spread of venture boom and successful examples being known widely, the outflow of precious human resources is accelerated and a large number of employees of conglomerates have already resigned or are considering separation from their positions, we can realize that are occurring a change which can be nearly called severance in an occupational view and an organization culture. The preference to a large enterprise or a public institution of labor is low today and the notion about a lifelong job is regarded as past remains. As for this, it could be said that the social atmosphere that pursued the stability of a job has been changed to the practical one that attaches importance to ability and pay. The way of thinking of employees has been changed while established organizations cannot satisfy their desire and this explains why important members of a company are flown out. The reason why superior human resources move to venture businesses is that they can do their likable work and also prove their ability as well as unconventional rewards. Although existing companies are trying to preserve important human resources through performance compensating stock option, temporary patching up of personnel management cannot retard the rushing wind of foundation and the outflow of labor. On the contrary, clumsy import of performance-based reward system not only fails to hire superior labor power but also can bring about a sense of incompatibility and conflicts among the remaining employees. Therefore, this thesis, focusing on how to choose, develop, and maintain the human resources, will suggest a future-aiming human resources management model of Korean enterprises after comparing and analyzing the actual condition of domestic companies and the trends of advanced corportaions.

• Journal of Nutrition and Health
• /
• v.42 no.4
• /
• pp.358-365
• /
• 2009

The study was performed for investigation with 257 female adults to find out the factors affecting health control behavior and obesity stress by personality type. First of all, BMIs of the respondents showed 30 low weight (11.7%), 170 normal weight (66.1%), 33 overweight (12.8%) and 24 obese respondents (9.4%). Comparing with low weight or normal weight, overweight or obesity could be seen as strong with diet control behaviors, from which obesity stress showed the tendency to be high accordingly. Second, the result of the investigation showed that for the open personality, which was featured as strongly desired to accomplish, very sincere and sensitive, they were more eager to control through health or diet. Third, the result of the investigation showed that for the more nervous, which is featured as emotionally unstable, bad at self control of impetus and clumsy to handle stress, the obesity stress was escalating.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.4 no.1
• /
• pp.81-86
• /
• 2010

This paper is case study on design, manufacture and application of customized assistive device for the ADL of person with brain lesions. The study had carried out from October 2010 to November 2010 and 2 clients from Assistive device case management demonstration project which is performed by Daegu assistive and rehabilitation center had participated. Case A, a 47-year-old man with brain lesions, stays only on the floor and could not get close to the usual toilet by himself because of the poor low extremities muscle strength and function. The moveable-toilet and customized ramp had applied to Case A. He clambers up the ramp and reach to the toilet easily. Case B, a 8-year-old boy with brain lesions, had difficulties with self-feeding because of his clumsy hand. Several existing feeding aids were applied but not appropriated. A customized feeding aid was designed and manufactured out of regard of Case A's ROM and right hand size. And his occupational therapist works together continuously to make him feed himself in the near future. Already-made assistive devices were not appropriate to Case A and B and to solve this problem, customized assistive devices were applied. The importance and needs of design and manufacture of assistive device were recognized through these case study.