• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.139-147
• /
• 2012

Mongolia's solar-meteorological resources map has been developed using satellite data and reanalysis data. Solar radiation was calculated using solar radiation model, in which the input data were satellite data from SRTM, TERA, AQUA, AURA and MTSAT-1R satellites and the reanalysis data from NCEP/NCAR. The calculated results are validated by the DSWRF (Downward Short-Wave Radiation Flux) from NCEP/NCAR reanalysis. Mongolia is composed of mountainous region in the western area and desert or semi-arid region in middle and southern parts of the country. South-central area comprises inside the continent with a clear day and less rainfall, and irradiation is higher than other regions on the same latitude. The western mountain region is reached a lot of solar energy due to high elevation but the area is covered with snow (high albedo) throughout the year. The snow cover is a cause of false detection from the cloud detection algorithm of satellite data. Eventually clearness index and solar radiation are underestimated. And southern region has high total precipitable water and aerosol optical depth, but high solar radiation reaches the surface as it is located on the relatively lower latitude. When calculated solar radiation is validated by DSWRF from NCEP/NCAR reanalysis, monthly mean solar radiation is 547.59 MJ which is approximately 2.89 MJ higher than DSWRF. The correlation coefficient between calculation and reanalysis data is 0.99 and the RMSE (Root Mean Square Error) is 6.17 MJ. It turned out to be highest correlation (r=0.94) in October, and lowest correlation (r=0.62) in March considering the error of cloud detection with melting and yellow sand.

• Tunnel and Underground Space
• /
• v.25 no.5
• /
• pp.462-469
• /
• 2015

This study carried out a topographic survey at a small-scale open-pit limestone mine in Korea (the Daesung MDI Seoggyo office) using a popular rotary-wing unmanned aerial vehicle (UAV, Drone, DJI Phantom2 Vision+). 89 sheets of aerial photos could be obtained as a result of performing an automatic flight for 30 minutes under conditions of 100m altitude and 3m/s speed. A total of 34 million cloud points with X, Y, Z-coordinates was extracted from the aerial photos after data processing for correction and matching, then an orthomosaic image and digital surface model with 5m grid spacing could be generated. A comparison of the X, Y, Z-coordinates of 5 ground control points measured by differential global positioning system and those determined by UAV photogrammetry revealed that the root mean squared errors of X, Y, Z-coordinates were around 10cm. Therefore, it is expected that the popular rotary-wing UAV photogrammetry can be effectively utilized in small-scale open-pit mines as a technology that is able to replace or supplement existing topographic surveying equipments.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.405-416
• /
• 2019

Due to the development of information and communication technology, the production and processing speed of data is getting faster. To classify objects using machine learning, which is a field of artificial intelligence, data required for training can be easily collected due to the development of internet and geospatial information technology. In the field of geospatial information, machine learning is also being applied to classify or recognize objects using images and point clouds. In this study, the problem of manually constructing training data using existing digital map version 1.0 was improved, and the technique of classifying roads, buildings and vegetation using image and point clouds were proposed. Through experiments, it was possible to classify roads, buildings, and vegetation that could clearly distinguish colors when using true ortho-image with only RGB (Red, Green, Blue) bands. However, if the colors of the objects to be classified are similar, it was possible to identify the limitations of poor classification of the objects. To improve the limitations, random forest and support vector machine techniques were applied after band fusion of true ortho-image and normalized digital surface model, and roads, buildings, and vegetation were classified with more than 85% accuracy.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.151-160
• /
• 2013

Recently, although many efforts have been made to estimate insolation over Korean Peninsula based on satellite imagery, most of them have utilized overseas satellite imagery. This paper aims to estimate insolation over the Korean Peninsula based on the Korean stationary orbit satellite imagery. It utilizes level 1 data and level 2 cloud image of COMS MI, the first meteorological satellite of Korea, and OMI image of NASA as input data. And Kawamura physical model which has been known to be suitable for East Asian area is applied. Daily global horizontal insolation was estimated by using satellite images of every fifteen minutes for the period from May 2011 to April 2012, and the estimates were compared to the ground based measurements. The estimated and observed daily insolations are highly correlated as the $R^2$ value is 0.86. The error rates of monthly average insolation was under ${\pm}15%$ in most stations, and the annual average error rate of horizontal global insolation ranged from -5% to 5% except for Seoul. The experimental results show that the COMS MI based approach has good potential for estimating insolation over the Korean Peninsula.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.415-426
• /
• 2015

Solar radiation under a clear sky is a important factor in the process by which meteorological satellite images are converted into solar radiation maps, and the quality of estimations depends on the accuracy of clear sky models. Therefore, it is important to select models appropriate to the purpose of the study and the study area. In this instance, complex models were applied using Linke turbidity, including ESRA, Dumortier, and MODTRAN, in addition to simple models such as Bourges and PdBV, which consider only the solar elevation angles. The presence of cloud was identified using the Communication, Ocean, and Meteorological Satellite and the Meteorological imager (COMS MI), and reference data were then selected. In order to calculate the accuracy of the clear sky models, the concepts of RMSE and MBE were applied. The results show that Bourges and PdBV produced low RMSE values, while PdBV had relatively steady RMSE values. Also, simple models tend to underestimate global solar irradiation during spring and early summer. Conversely, in the winter season, complex methods often overestimate irradiation. In future work, the cause of overestimation and other factors will be analyzed and the clear sky models will be adjusted in order to make them suitable for the Korean Peninsula.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.455-465
• /
• 2017

This study focuses on design development and verification through virtual simulation based on 3D model data in the cloud platform as a method of utilization of engineering technology of design in the fourth industrial revolution era. The goal of research is to develop and examine a design for the needs of the target that has never been met before through virtual simulations that can be conducted in practice. As a research method, we analyzed secondary data to identify the needs of the target, and did literature research for the ergonomic data and target body development stages. In addition, the design development process of this study was shown meaningful result in design, structure, safety, material, durability through loop test of 7 virtual simulations. This study can be applied to the automated process system based on 3D model data in the 4th industrial revolution era and can be used as an element of the cyber physics system for the additional research.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.5
• /
• pp.1129-1139
• /
• 2015

Inference process generates additional triples from knowledge represented in RDF triples of semantic web technology. Tens of million of triples as an initial big data and the additionally inferred triples become a knowledge base for applications such as QA(question&answer) system. The inference engine requires more computing resources to process the triples generated while inferencing. The additional computing resources supplied by underlying resource pool in cloud computing can shorten the execution time. This paper addresses an algorithm to allocate the number of computing nodes "elastically" at runtime on Hadoop, depending on the size of knowledge data fed. The model proposed in this paper is composed of the layered architecture: the top layer for applications, the middle layer for distributed parallel inference engine to process the triples, and lower layer for elastic Hadoop and server visualization. System algorithms and test data are analyzed and discussed in this paper. The model hast the benefit that rich legacy Hadoop applications can be run faster on this system without any modification.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.18-18
• /
• 2011

Climate change is impacting and will increasingly impact both the quantity and quality of the world's water resources in a variety of ways. In some areas warming climate results in increased rainfall, surface runoff, and groundwater recharge while in others there may be declines in all of these. Water quality is described by a number of variables. Some are directly impacted by climate change. Temperature is an obvious example. Notably, increased atmospheric concentrations of $CO_2$ triggering climate change increase the $CO_2$ dissolving into water. This has manifold consequences including decreased pH and increased alkalinity, with resultant increases in dissolved concentrations of the minerals in geologic materials contacted by such water. Climate change is also expected to increase the number and intensity of extreme climate events, with related hydrologic changes. A simple framework has been developed in New Zealand for assessing and predicting climate change impacts on water resources. Assessment is largely based on trend analysis of historic data using the non-parametric Mann-Kendall method. Trend analysis requires long-term, regular monitoring data for both climate and hydrologic variables. Data quality is of primary importance and data gaps must be avoided. Quantitative prediction of climate change impacts on the quantity of water resources can be accomplished by computer modelling. This requires the serial coupling of various models. For example, regional downscaling of results from a world-wide general circulation model (GCM) can be used to forecast temperatures and precipitation for various emissions scenarios in specific catchments. Mechanistic or artificial intelligence modelling can then be used with these inputs to simulate climate change impacts over time, such as changes in streamflow, groundwater-surface water interactions, and changes in groundwater levels. The Waimea Plains catchment in New Zealand was selected for a test application of these assessment and prediction methods. This catchment is predicted to undergo relatively minor impacts due to climate change. All available climate and hydrologic databases were obtained and analyzed. These included climate (temperature, precipitation, solar radiation and sunshine hours, evapotranspiration, humidity, and cloud cover) and hydrologic (streamflow and quality and groundwater levels and quality) records. Results varied but there were indications of atmospheric temperature increasing, rainfall decreasing, streamflow decreasing, and groundwater level decreasing trends. Artificial intelligence modelling was applied to predict water usage, rainfall recharge of groundwater, and upstream flow for two regionally downscaled climate change scenarios (A1B and A2). The AI methods used were multi-layer perceptron (MLP) with extended Kalman filtering (EKF), genetic programming (GP), and a dynamic neuro-fuzzy local modelling system (DNFLMS), respectively. These were then used as inputs to a mechanistic groundwater flow-surface water interaction model (MODFLOW). A DNFLMS was also used to simulate downstream flow and groundwater levels for comparison with MODFLOW outputs. MODFLOW and DNFLMS outputs were consistent. They indicated declines in streamflow on the order of 21 to 23% for MODFLOW and DNFLMS (A1B scenario), respectively, and 27% in both cases for the A2 scenario under severe drought conditions by 2058-2059, with little if any change in groundwater levels.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.29-33
• /
• 2010

The purpose of LiDAR ground classification is to archive both goals which are acquiring confident ground points with high precision and describing ground shape in detail. In spite of many studies about developing optimized algorithms to kick out this, it is very difficult to classify ground points and describing ground shape by airborne LiDAR data. Especially it is more difficult in a dense forested area like Korea. Principle misclassification was mainly caused by complex forest canopy hierarchy in Korea and relatively coarse LiDAR points density for ground classification. Unfortunately, a lot of LiDAR surveying performed in summer in South Korea. And by that reason, schematic LiDAR points distribution is very different from those of Europe. So, this study propose enhanced ground classification method considering Korean land cover characteristics. Firstly, this study designate highly confident candidated LiDAR points as a first ground points which is acquired by using big roller classification algorithm. Secondly, this study applied weighted gradient kernel(WGK) algorithm to find and include highly expected ground points from the remained candidate points. This study methods is very useful for reconstruct deformed terrain due to misclassification results by detecting and include important terrain model key points for describing ground shape at site. Especially in the case of deformed bank side of river area, this study showed highly enhanced classification and reconstruction results by using WGK algorithm.

• Journal of The Korean Astronomical Society
• /
• v.33 no.2
• /
• pp.111-121
• /
• 2000

Many models of globular cluster formation assume the presence of cold dense clouds in early universe. Here we re-examine the Fall & Rees (1985) model for formation of proto-globular cluster clouds (PGCCs) via thermal instabilities in a protogalactic halo. We first argue, based on the previous study of two-dimensional numerical simulations of thermally unstable clouds in a stratified halo of galaxy clusters by Real et al. (1991), that under the protogalactic environments only nonlinear (${\delta}{\ge}1$) density inhomogeneities can condense into PGCCs without being disrupted by the buoyancy-driven dynamical instabilities. We then carry out numerical simulations of the collapse of overdense douds in one-dimensional spherical geometry, including self-gravity and radiative cooling down to T = $10^4$ K. Since imprinting of Jeans mass at $10^4$ K is essential to this model, here we focus on the cases where external UV background radiation prevents the formation of $H_2$ molecules and so prevent the cloud from cooling below $10^4$ K. The quantitative results from these simulations can be summarized as follows: 1) Perturbations smaller than $M_{min}\~(10^{5.6}\;M{\bigodot})(nh/0.05cm^{-3})^{-2}$ cool isobarically, where nh is the unperturbed halo density, while perturbations larger than $M_{min}\~(10^8\;M{\bigodot})(nh/0.05cm^{-3})^{-2}$ cool isochorically and thermal instabilities do not operate. On the other hand, intermediate size perturbations ($M_{min} < M_{pgcc} < M_{max}$) are compressed supersonically, accompanied by strong accretion shocks. 2) For supersonically collapsing clouds, the density compression factor after they cool to $T_c = 10^4$ K range $10^{2.5} - 10^6$, while the isobaric compression factor is only $10^{2.5}$. 3) Isobarically collapsed clouds ($M < M_{min}$) are too small to be gravitationally bound. For supersonically collapsing clouds, however, the Jeans mass can be reduced to as small as $10^{5.5}\;M_{\bigodot}(nh/0.05cm^{-3})^{-1/2}$ at the maximum compression owing to the increased density compression. 4) The density profile of simulated PGCCs can be approximated by a constant core with a halo of $p{\infty} r^{-2}$ rather than a singular isothermal sphere.