• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.84-92
• /
• 2001

The development of a crack propagation simulation model in consideration of crack closure behavior was discussed in the accompanying paper by the authors, Kim et al(2001). To verify crack propagation behavior under variable amplitude loading based on the model, calculations of effective crack driving stresses and corresponding propagation lives are carried out for load spectrums with various stress ratios, overload and underload. Good agreement is confirmed between test results in the literatures and simulations using the developed model.

• Journal of Chest Surgery
• /
• v.56 no.3
• /
• pp.155-161
• /
• 2023

Background: Surgical closure of an atrial septal defect (ASD) is infrequently indicated during infancy. We evaluated the clinical characteristics and outcomes of patients who underwent surgical ASD closure during infancy. Methods: A single-center retrospective review was performed for 39 patients (19 males) who underwent surgical ASD closure during infancy between 1993 and 2020. The median body weight percentile at the time of operation was 9.3. Results: During a median follow-up of 60.9 months, 4 late deaths occurred due to chronic respiratory failure. A preoperative history of bronchopulmonary dysplasia (BPD) was the only risk factor for late mortality identified in Cox regression (hazard ratio, 3.54; 95% confidence interval [CI], 1.75-163.04; p=0.015). The 5-year survival rate was significantly lower in patients with preoperative history of BPD (97.0% vs. 50.0%, p<0.001) and preoperative ventilatory support (97.1% vs. 40.4%, p<0.001). There were significant postoperative increases in left ventricular end-diastolic (p=0.017), end-systolic (p=0.014), and stroke volume (p=0.013) indices. A generalized estimated equation model showed significantly better postoperative improvement in body weight percentiles in patients with lower weight percentiles at the time of operation (<10th percentile, p=0.01) and larger indexed ASD diameter (≥45 mm/m², p=0.025). Conclusion: Patients with ASD necessitating surgical closure during infancy are extremely small preoperatively and remain small even after surgical closure. However, postoperative somatic growth was more prominent in smaller patients with larger defects, which may be attributable to an increase in postoperative cardiac output due to changes in ventricular septal configuration. The benefits of ASD closure in patients with BPD are undetermined.

• Journal of the Korean Society of Combustion
• /
• v.13 no.1
• /
• pp.31-43
• /
• 2008

Oxy-fuel flame has a significantly different structure from that of air-fuel flame because of its high temperature. This study is aimed to find out the difference of the oxy-fuel flame structure in order to understand reaction mechanism closely, which is crucial to design real-scale oxy-fuel combustion system. By examining pictures of counterflow flame and LIF images, we found that oxy-fuel flame had two-zone structure: fuel decomposition region and distributed CO oxidation region. In the oxy-fuel flame, OH radical was distributed intensely through the whole flame due to its higher flame temperature than crossover temperature. For showing those features of the oxy-fuel flame, 1 MW scale IFRF oxy-natural gas burner was simulated by conditional moment closure(CMC) model. Calculation results were compared with experimental data, and showed agreements in trend. In the simulated distributions of fuel decomposition/CO oxidation rates, CO oxidation region was also separated from fuel decomposition zone considerably, which showed the two-zone structure in the oxy-fuel flame.

• Journal of Environmental Impact Assessment
• /
• v.17 no.5
• /
• pp.279-288
• /
• 2008

Vertical forest distribution is one of the important factors to understand various ecological mechanism such as succession, disturbance and environmental effects. LiDAR data provide information, both the horizontal and vertical distribution of forest structure. The laser scanner survey provided a point cloud, in which the x, y, and z coordinates of the points are known. The objectives of this study were 1) to analyze factors of forest structure such as individual tree isolation, tree height, canopy closure and tree density using LiDAR data and 2) to compare the forest structure between outer and interior forest. The paper conducted to extract the individual tree using watershed algorithm and to interpolate using the first return of LiDAR data for yielding digital surface model (DSM). The results of the study show characters of edge such as more isolated individual trees, higher density, lower canopy closure, and lower tree height than those of interior forest. LiDAR data is to be useful for analyzing of forest structure. Further study should be undertaken with species for more accurate results.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.35-43
• /
• 2004

Reduction of fresh water consumption and effluent discharge provide diverse advantages in raw materials and energy savings. Papermaking system closure, however, reduces the efficiency of additives, decreases retention and dewatering, and causes many other Problems in papermaking. Accumulation of inorganic and organic substances in the process white water is the prime cause of these problems. Understanding of the accumulation phenomena of the detrimental substances in the papermaking process is of great importance for papermaking system closure. In this study a process simulation method was employed to analyze the accumulation phenomena of anionic starch in the process white water as the reuse rate of dry broke and pick up of surface sizing agent is increased. Steady state simulation studies were carried out based on the model developed in previous study. The variation of dissolved starch concentration in each process unit was monitored as a function of reuse rate of dry broke and surface sizing agent pick up rate. The result showed that dissolved starch concentration Increased as reuse rate of dry broke and surface sizing agent pick up rate was increased.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.16 no.2
• /
• pp.152-157
• /
• 2005

Background and Objectives : 10 normal Korean native speakers participated subjects to investigate the acoustic and aerodynamic study of Korean fricatives, affricates, and plosives and to make good use of the results for the patients with articulation problems. Materials and Method Their productions of [asa], [as'a], [aca], $[ac^ha]$, (ac'a), (ata) , $[at^ha]$, and [at'a] were analyzed with Lx Speech Studio Program (Laryngogrtaph Ltd, UK) for acoustic analysis and Phonatory Function Analyze. (Nagashima Ltd. Model PS 77H, Tokyo, Japan) for aerodynamic analysis. Results : The results are as follows : 1) Plosives showed higher Qx1 in vocal folds closure ratio than fricatives and affricates. 2) Tense fricatives, affricates, and plosives showed higher Qx2 in vocal folds closure ratio than asperated and 1ax. 3) Asperated showed higher Qx1 in vocal folds closure ratio than tense and 1ax. 4) Asperated showed higer peak flow rate than tense and 1ax. Conclusion This results may be helpful for treatment in articulation disorders.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.223-229
• /
• 2008

In this paper. we propose the real-time vision system which judges drowsiness driving based on levels of drivers' fatigue. The proposed system is to prevent traffic accidents by warning the drowsiness and carelessness using face-image analysis and fuzzy logic algorithm. We find the face position and eye areas by using fuzzy skin filter and virtual face model in order to develop the real-time face detection algorithm, and we measure the eye blinking frequency and eye closure duration by using their informations. And then we propose the method for estimating the levels of drivel's fatigue based on measured data by using the fuzzy logic and for deciding whether drowsiness driving is or not. Finally, we show the effectiveness and feasibility of the proposed method through some experiments.

• Journal of Korea Water Resources Association
• /
• v.56 no.spc1
• /
• pp.1059-1069
• /
• 2023

Dam-break flow occurs when an elevated dam suddenly collapses, resulting in the catastrophic release of rapid and uncontrolled impounded water. This study compares laminar and turbulent closure models for simulating three-dimensional dam-break flows using OpenFOAM. The Reynolds-Averaged Navier-Stokes (RANS) model, specifically the k-ε model, is employed to capture turbulent dissipation. Two scenarios are evaluated based on a laboratory experiment and a modified multi-layered block obstacle scenario. Both models effectively represent dam-break flows, with the turbulent closure model reducing oscillations. However, excessive dissipation in turbulent models can underestimate water surface profiles. Improving numerical schemes and grid resolution enhances flow recreation, particularly near structures and during turbulence. Model stability is more significantly influenced by numerical schemes and grid refinement than the use of turbulence closure. The k-ε model's reliance on time-averaging processes poses challenges in representing dam-break profiles with pronounced discontinuities and unsteadiness. While simulating turbulence models requires extensive computational efforts, the performance improvement compared to laminar models is marginal. To achieve better representation, more advanced turbulence models like Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS) are recommended, necessitating small spatial and time scales. This research provides insights into the applicability of different modeling approaches for simulating dam-break flows, emphasizing the importance of accurate representation near structures and during turbulence.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.167-168
• /
• 2000

복잡한 구조를 갖고 시간에 따라서 변하는 바람장내에서 공장굴뚝과 같은 점오염원에서 배출되는 오염물질의 확산을 계산하기 위해서 라그란지안 입자확산모텔(Lagrangian Particle Dispersion Model, LPDM)을 사용하는 것이 최근의 연구 동향이다. 구윤서(1999a, 1999b)는 중립 및 안정한 대기조건에서 바람장 계산시 비평형 2.5 난류모델을 이용한 LPDM을 개발하여 복잡한 대기흐름내 확산현상을 보다 정확히 모사할 수 있는 LPDM을 제시하였다. (중략)

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.405-411
• /
• 2000

This study reviews qualitatively the flow characteristics around th tidal gap during seadike closures using a three-dimensional model for shallow water equations. The Princeton Ocean Model(POM) was adapted and applied to the Sihwa Seadike which was closed in 1994. The simulated flow patterns around the gap showed that tidal velocities increase with the cross-sectional area during ebb tide. The accelerated flow extended to wider zones passing the gap, and shock waves were generated. Vertical tidal velocity profiles were affected as the bottom scours developed beyond normal conditions.