• Tunnel and Underground Space
• /
• v.21 no.2
• /
• pp.138-144
• /
• 2011

Mine closure does often accompany the flooding of mine galleries due to ceasing a pumping operation. When a mine gallery is flooded, rocks around the gallery are fully saturated and the gallery is subject to a water pressure. The uniaxial unconfined compressive strength of a rock depends on its water content and decreases as the water content increases. A water pressure may originate the crack growth of a rock or the discontinuity growth of rock mass. Although the water in a gallery will give some support pressure inside the gallery, the degradation of rock mass properties caused by a water pressure will reduce the stability of the gallery. In this study, 2-dimensional discontinuous and 3-dimensional continuous numerical analyses have been conducted to evaluate an effect that a reduction of rock mass properties around the gallery induced by a water pressure has on the stability of mine gallery. The numerical analyses show that a reduction of rock mass properties caused by a water pressure increases displacements of rock mass around mine gallery. 2-dimensional model is found to give larger values of displacement than 3-dimensional model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.5
• /
• pp.383-390
• /
• 2013

The reduction of the maximum acceleration which causes shock for a missile is very important to prevent abnormal operation of a missile and decrease size and cost of missile components. Because the maximum acceleration created by operation of an ejection gas generator occurs in the initial ejection stage, the design parameters which affect initial ejection stage were examined. The igniter and the nozzle closure were selected as design parameters of a gas generator. The maximum acceleration created by the gas generator was examined experimentally by changing of the design parameters. Finally the reduction effect of the maximum acceleration was compared quantitatively by static fire test of a gas generator. The maximum acceleration of the best model which was applied to each optimal design parameter was about 68% reduced than that of the reference model.

• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.393-403
• /
• 2019

Objective: Sliding mechanics using orthodontic miniscrews is widely used to stabilize the anchorage during extraction space closure. However, previous studies have reported that both posterior segment displacement and anterior segment displacement are possible, depending on the mechanical properties of the archwire. The present study aimed to investigate the effect of archwire stiffness and friction change on the displacement pattern of the maxillary posterior segment during anterior segment retraction with orthodontic miniscrews in sliding mechanics. Methods: A three-dimensional finite element model was constructed. The retraction point was set at the archwire level between the lateral incisor and canine, and the orthodontic miniscrew was located at a height of 8 mm from the archwire between the second premolar and first molar. Archwire stiffness was simulated with rectangular stainless steel wires and a rigid body was used as a control. Various friction levels were set for the surface contact model. Displacement patterns for the posterior and anterior segments were compared between the conditions. Results: Both the anterior and posterior segments exhibited backward rotation, regardless of archwire stiffness or friction. Among the conditions tested in this study, the least undesirable rotation was found with low archwire stiffness and low friction. Conclusions: Posterior segment displacement may be unavoidable but reducing the stiffness and friction of the main archwire may minimize unwanted rotations during extraction space closure.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2094-2106
• /
• 2022

The solid-state core of a heat pipe cooled reactor operates at high temperatures over 1000 K with thermal and irradiation-induced expansion during burnup. The expansion changes the gap thickness between the solid components and the material properties, and may even cause the gap closure, which then significantly influences the thermal and mechanical characteristics of the reactor core. This study developed an irradiation behavior model for HPRTRAN, a heat pipe reactor system analysis code, to introduce the irradiation effects such as swelling and creep. The megawatt heat pipe reactor MegaPower was chosen as an application case. The coupled irradiation-thermal-mechanical model was developed to simulate the irradiation effects on the heat transfer and stresses of the whole reactor core. The results show that the irradiation deformation effect is significant, with the irradiation-induced strains up to 2.82% for fuel and 0.30% for monolith at the end of the reactor lifetime. The peak temperatures during the lifetime are 1027:3 K for the fuel and 956:2 K for monolith. The gap closure enhances the heat transfer but caused high stresses exceeding the yield strength in the monolith.

• Journal of Information Technology Services
• /
• v.21 no.2
• /
• pp.1-26
• /
• 2022

This study classified five types of online food subscription economy: replenishment, curation, surprise, membership, and visitation. An online survey was conducted with 314 customers who experienced 5 types of online subscription economy. This study selected the characteristics of the food subscription economy as convenience, perceived personalization, economic utility, and timeliness through previous studies. The effect of the four characteristics on perceived value (utilitarian and emotional) and the relationship between customer engagement and perceived value, which are dependent variables that have never been used in the food subscription economy, were verified through the S-O-R model. In this relationship, we demonstrated how consumers' personal tendencies, such as need for cognitive closure and self-efficacy, mediate between timeliness and perceived value related to online food delivery. The study results are as follows. Perceived personalization, convenience, and timeliness had a positive effect on the utilitarian value in the order. It also had a positive effect on emotional values in the order of perceived personalization and timeliness. On the other hand, economic utility had no significant effect on practical branches. Customer engagement had a positive effect in the order of emotional value and utilitarian value. The lower the need for cognitive closure the more positive the utilitarian value. The lower the self-efficacy, the more positive the emotional value was perceived. Through the above study, companies that want to operate or start an online food subscription economy need a strategic approach rather than unreasonable price discounts in pricing policy. In addition, it is necessary to focus on marketing activities that provide emotional value by focusing on perceived personalization, which is the satisfaction factor of online food subscription.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.61-70
• /
• 1999

The Purpose of this study is to test whether Braess Paradox (BP) can be revealed in a real world network. Fer the study, Namsan 2nd tunnel case is chosen, which was shut down for 3 years for repair works. The revelation of BP is determined by analyzing network-wise traffic impacts followed by the tunnel closure. The analysis is conducted using a network simulation model called SECOMM developed for the congestion management of the Seoul metropolitan area. Also, the existence of BP is further identified by a before-after traffic survey result of the major arterials nearby the Namsan 2nd tunnel. The model estimation expected that the closure of Namsan 2nd tunnel improve the network-wise average traffic speed from 21.95km/h to 22.21km/h when the travel demand in the study area and congestion Pricing scheme on Namsan 1st & 3rd tunnels remain unchanged. In addition, the real world monitoring results of the corridors surrounding Namsan 2nd tunnel show that the average speed increases from 29.53km/h to 30.37km/h after the closure. These findings clearly identify the BP Phenomenon is revealed in this case.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.4
• /
• pp.163-172
• /
• 2022

This study investigates the IPI (Information Protection Intention) of DHS (Digital Healthcare Service) providers by introducing PMT (Protection Motivation Theory). This study examines the effects of protection motivation, such as threat appraisal and coping appraisal, on IPI, such as ICI(Induction Control Intention) and SDI(Self Defense Intention). The research model, based on the PMT, adopted severity, vulnerability, reaction efficacy and self-efficacy as independent variables. The research model was validated through quantitative research, a survey of 222 DHS providers in South Korea, using structural equation modeling. The results show that (1) a clear awareness of the consequences of security threats increases the understanding of DHS providers on the severity of closure of healthcare information, and thus may decreases abuse of DHS by providers; (2) user confidence and satisfaction on the security system may make them be confident that they can handle the closure of healthcare information by themselves; and (3) although DHS providers are realizing the consequences of closure of healthcare information, they think that they are unlikely to encounter such situations. As a result of this study, venture companies that provide DHS need to provide contents that can continuously increase providers' security level in order to increase providers' information protection intention. It suggests that IPI is important through trust of healthcare service providers.

• Ocean Systems Engineering
• /
• v.11 no.1
• /
• pp.43-58
• /
• 2021

In the present work, a 3D numerical model is proposed to study local scouring around single vertical piers with different cross-section shapes under steady-current flow. The model solves the flow field and sediment transport processes using a coupled approach. The flow field is obtained by solving the Unsteady Reynolds Averaged Navier-Stokes (URANS) equations in combination with the k-ω SST turbulence closure model and the sediment transport is considered using both bedload and suspended load models. The proposed model is validated against the empirical measurements of local scour around single vertical piers with circular, square, and diamond cross-section shapes obtained from the literature. The measurement of scour depth in equilibrium condition for the simulations reveal the differences of 4.6%, 6.7% and 13.1% from the experimental measurements for the circular, square, and diamond pier cases, respectively. The model displayed a remarkable performance in the prediction of scour around circular and square piers where horseshoe vortices (HSVs) have a leading impact on scour progression. On the other hand, the maximum deviation was found in the case of the diamond pier where HSVs are weak and have minimum impact on the formation of local scour. Overall, the results confirm that the prediction capability of the present model is almost independent of the strength of the formed HSVs and pier cross-section shapes.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.2
• /
• pp.109-116
• /
• 2010

Objectives: The pandemic of novel influenza A (H1N1) virus has required decision-makers to act in the face of the substantial uncertainties. In this study, we evaluated the potential impact of the pandemic response strategies in the Republic of Korea using a mathematical model. Methods: We developed a deterministic model of a pandemic (H1N1) 2009 in a structured population using the demographic data from the Korean population and the epidemiological feature of the pandemic (H1N1) 2009. To estimate the parameter values for the deterministic model, we used the available data from the previous studies on pandemic influenza. The pandemic response strategies of the Republic of Korea for novel influenza A (H1N1) virus such as school closure, mass vaccination (70% of population in 30 days), and a policy for anti-viral drug (treatment or prophylaxis) were applied to the deterministic model. Results: The effect of two-week school closure on the attack rate was low regardless of the timing of the intervention. The earlier vaccination showed the effect of greater delays in reaching the peak of outbreaks. When it was no vaccination, vaccination at initiation of outbreak, vaccination 90 days after the initiation of outbreak and vaccination at the epidemic peak point, the total number of clinical cases for 400 days were 20.8 million, 4.4 million, 4.7 million and 12.6 million, respectively. The pandemic response strategies of the Republic of Korea delayed the peak of outbreaks (about 40 days) and decreased the number of cumulative clinical cases (8 million). Conclusions: Rapid vaccination was the most important factor to control the spread of pandemic influenza, and the response strategies of the Republic of Korea were shown to delay the spread of pandemic influenza in this deterministic model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.911-918
• /
• 1997

The turbulent viscous wake flows behind a single airfoil, two-dimensional stationary blade row and three-dimensional rotating blade row were calculated, and the numerical results were compared with experimental ones. The numerical technique was based on the SIMPLE algorithm using three turbulent closure models, standard k-.epsilon. model(WFM), low Reynolds number k-.epsilon. model(LRN) and Reynolds stress model (RSM). In the case of a single airfoil, WFM, LRN and RSM presented fairly good velocity distributions in the wake compared with experimental data. In the case of the stationary blade row, LRN and RSM presented better results than WFM for wake velocity distribution, and especially LRN showed best results among these three turbulent models. In the case of the rotating blade row, WFM and LRN showed fairly good agreement with experimental data of the three-dimensional velocity component distributions in the range from hub to mid span region. LRN was also superior to WFM in accuracy of prediction for the wake velocity distribution as same with the cases of a airfoil and the stationary blade row.