• 한국화재소방학회논문지
• /
• 제24권3호
• /
• pp.106-112
• /
• 2010

본 연구는 제연구역 출입문의 자동폐쇄장치의 개발을 위한 기초 연구의 일환으로 자동폐쇄장치의 운동해석을 수행하였다. 본 연구는 자동폐쇄장치의 프로세스와 자동폐쇄조절장치의 운동 메커니즘 정립과 기구 모델링을 바탕으로 자동폐쇄장치의 해석이론을 정립하였고, 해석이론을 바탕으로 한 운동해석 시뮬레이션을 통해 폐쇄력 장치를 선정하고 자동폐쇄조절장치의 각 요소를 설계할 수 있는 엔지니어링 데이터 축과 원천기술을 확립하였다. 따라서 본 연구로부터 자동폐쇄장치 개발의 유연성과 탄력성을 줄 수 있고, 또한 자동폐쇄장치의 개발로 인한 연기의 제어수단과 기술적 대책을 마련하고 제연시스템의 높은 신뢰성과 안정성을 확보할 수 있을 것으로 본다.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.104-110
• /
• 2005

GIS(Gas Insulated Switchgear) is used in electric power system, to insure non conductivity, breaking capacity and operating reliability. The commercial dynamic analysis code COSMOS MOTION and 3-D modeling program SOLID WORKS were used to simulate dynamic analysis of the closing resistors of the GIS in this paper. To reduce chatter vibration of closing resistors, the motion of moving and fixed parts of closing resistors were simulated by varying the spring constant, the damping coefficient and the mass of moving and fixed parts. The simulated results were compared with experimental results. As a result, chatter vibration of closing resistors of the GIS could be reduced by using the results. These data can be used to determine the spring constant, the damping coefficient and mass of a moving part to reduce chatter vibration when the next model is developed.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1607-1613
• /
• 2006

GIS (Gas Insulated Switchgear) is used in electric power system to insure non conductivity, breaking capacity and operating reliability. In the present study, dynamic analysis on the closing resistors of the GIS has bees carried out by the commercial dynamic analysis code COSMOS MOTION and 3-D modeling program SOLID WORKS. In order to find the minimum value of chatter vibration of closing resistors, the motion of moving and fixed resistor parts of closing resistors were simulated by varying the spring constant, the damping coefficient and the mass of moving and fixed resistor parts. The simulated results were compared with experimental results. The application of the results could reduce chatter vibration of closing resistors of the GIS. These data are also useful on the development of future model GIS with minimum chatter vibration for the determinations of the spring constant, the damping coefficient and mass of a moving part.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.67-79
• /
• 1998

Inthe study, a method to evaluate the door closing sound has been developed. Based on the factor analysis, various adjective pairs which describe meaning of the door impact sound have been differentiated. This approach, called Semantic difference(SD) method, was originally developed in linguistics research on order to compare diverse mother tongue. This paper introduces at first how the door sound os generated and transmitted. After that, a factor analysis which is a tool of SD method is implemented to door closing sound for 12 domestic and 1 foreign car models. During investigation, the examined models are categorized into small, medium and luxurious size automobiles. The adjective pairs which attritbute to the door quality have been factorized into three group : expensive/ smooth, powerful/ heavy, and modern/dull. It turns out that the first factor : expensive/ smooth plays the most important role in door closing sound quality.

• 소성∙가공
• /
• 제19권7호
• /
• pp.399-404
• /
• 2010

We propose an analysis model for simulating the detailed procedure of pore closing in open die forging of shafts. In the analysis model, an artificial symmetric plane is used, on which initial pores are located to be traced. The analysis model is employed to carry out three-dimensional simulation of pore closing in shaft free forging by both conventional free forging press and radial forging machine. With this result, two typical types of free forging equipment for manufacture of shafts are compared in detail. It has shown that the radial forging machine is much superior to the conventional open die forging press especially in pore closing under high hydrostatic pressure with sound strain.

• 한국융합학회논문지
• /
• 제11권2호
• /
• pp.155-160
• /
• 2020

본 연구에서는 자동차 창문의 개폐에 따라 공기의 내부 유동 해석을 통하여 여름철에 운전자와 동승자의 쾌적한 운전환경을 고찰하였다. 실제 운전 환경을 고려하여, 자동차 창문 개폐 상태로서의 에어컨 입구 조건들을 유동 해석에 적용하였다. 자동차 에어컨 토출구, 시트 그리고 실내를 모델링하였고, 차 내부에서의 공기유동을 해석하여 공기의 유동형상과 내부의 온도분포를 확인하였다. 본 해석에서는 공기 유입부와 배출구를 정하고 자동차 내부를 단열상태로 가정하고 내부공기와 창문 개폐의 영향만을 고려해서 결과를 보았다. 각 조건들의 해석을 고찰해보면 본 연구 모델들이 쾌적한 환경이 유지됨을 알 수 있었다. 차량 창문 개폐에 따른 내부에서의 유동에 대한 본 해석 결과는 디자인 분야에 융합하여 적용될 수 있다고 보인다.

• 물과 미래
• /
• 제8권2호
• /
• pp.65-74
• /
• 1975

The east coast seems to have remarkably different features from the west and south coast in the geographical, geomorphological, and oceanographical senses. In this paper the auther wishes to introduce some results of investigation morphological characteristics of the river mouth in the east coast an of analysis of it's causes. There are various closing form in river mouth by many causes, but the east coast hs the same closing form(the ratio of closing; roughly 0.18), as well known, by the sand spit, and has not hydrological but littoral drift background. The river of the east coast is proved mature age from hypsometric analysis. The wave and longshore current must be principal factor to be considered, in the analysis of the closing phenomenon owing to littoral drift. The research of the blown sand is considered valuable for the next study of this subject.

• 한국수자원학회논문집
• /
• 제37권8호
• /
• pp.613-622
• /
• 2004

Non-Darcy 제체내 침투수 흐름과 배수갑문을 통한 흐름의 특성을 고려한 최종체절의 수리특성분석 모형에 의한 해석결과는 실측자료와 잘 일치하여 개발된 모형의 적용성이 있음을 보여주었다. 실측치와의 비교에서 본간(1985) 식에 의한 계산결과가 나정우(1987)에 의한 방법보다 비교적 정확함을 보여주었다. 아울러 완전 또는 불완전 월류의 구분이 없이 완전월류식에 잠수도를 이용한 유량계수식을 사용한 나정우 식의 사용성을 보여 주었다. 본간 식과 나정우 식에 의한 계산 값이 실측치보다는 유출입 특성이 크게 나타나 현장에서 체절구간의 불규칙적인 단면 양상을 감안한 유량계수의 조정이 필요할 것으로 판단된다. 일반적으로 최종체절의 수리특성 분석에서 제체구간의 침투수 흐름의 고려는 Darcy 흐름에 기초하여 분석하여왔다. 제체내 침투수의 유량과 개방구간을 통과하는 유량의 비가 체절구간이 좁을수록 크게 나타나, 제체내 침투수의 정확한 해석에 의한 체절구간의 수리특성을 분석해야할 필요가 있다.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.163-170
• /
• 2002

The dynamic model of a high-speed vacuum circuit breaker mechanism with spring-actuated cam and linkage is derived to simulate the high-speed closing and opening operations. Its validation for an analysis of high-speed motion behavior is checked through experiments. The characteristics of the friction on the camshaft are investigated using the nonlinear pendulum experiment. The parameters of the friction model are estimated using the optimization technique. The analysis exhibits that the friction of the pendulum depends on stick-slip, Stribeck effect and viscous damping. Comparing simulation results with actual responses using a high-speed camera, the appropriateness of derived dynamic models for the rapid closing and opening operations is shown. The spring motion, which has much influence on the closing responses, is observed.

• 자동차안전학회지
• /
• 제5권2호
• /
• pp.51-56
• /
• 2013

In vehicle's door wiring harness (W/H) system is more toward to arrange a passenger compartment than a hinge and a weatherstrip. An opening/closing member of a vehicle is attached to a vehicle by a hinge in a manner enabling easy opening and closing of the opening/closing member. Such members include doors, such as side-doors and rear doors, and other opening/closing members, such as trunk lids. This article gives some insight into the dimensioning process, with special focus on large deflection analysis of wiring harness(W/H) in vehicle's door structures for durability problem. The Finite elements analysis for door wiring harness(W/H) is used for residual stresses and dimensional stability with bending flexible. Durability test data for slam test specimens were compared with the numerical predicted fatigue life for verification. The final testing of the component combines the effects of these microstructural features with the complex stress state arising from the combined service loading and residual stresses.