• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1406-1415
• /
• 2010

As process technology for semiconductor goes beyond the ultra-deep submicrometer regime, interconnect reliability on a chip has become a serious design concern. As process parameters scale, interconnect widths are reduced rapidly while the current flowing through the interconnect does not decrease in a proportional manner. This trend increases current densities in metal interconnects which may lead to poor reliability for electromigration. Hence, it is critical to estimate the current amount passing through the interconnects earlier in semiconductor design stages. The purpose of this paper is to propose a fast yet accurate current estimation technique that can offer not only analysis time equivalent to those offered by the previous approximation methods but also a relatively precise estimation by using closed-form equations. The accuracy of the proposed technique was confirmed to be about 8 times better on average when compared to the previous work.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.639-644
• /
• 2009

This paper presents a modified CFS (Closed-Form Solution) for FLAOA (Forward Link AOA) measurements. During when the pseudo-measurement equation for FLAOA is derived, the angle measurement noise is treated more carefully in approximation. As the covariance matrix of the pseudo-measurement noise is influenced by unknown user positions and azimuth, a two-step estimation technique is used in the proposed CFS. The performance of the proposed CFS for FLAOA is compared to that of the conventional CFS for FLAOA and RLAOA (Reverse Link AOA) in a computer simulation. Simulation results show that the proposed method is potentially suitable for applications involving the localization and guidance of indoor mobile robots.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.885-888
• /
• 2010

It is known that triangular QAM with triangular signal constellations gets better SER gain than square QAM with rectangular signal constellations. In the paper, we propose an exact and general closed-form expression of the probability of symbol error for generalized TQAM, which has been currently researched. We verify that the simulation is consistent with the derived equation of generalized TQAM. And, we also suggest the optimal signal constellation schemes for generalized TQAM at given SNR values.

• Steel and Composite Structures
• /
• v.43 no.2
• /
• pp.185-200
• /
• 2022

A Closed-form solution for dynamic response of a functionally graded (FG) nonlocal nanobeam due to action of moving harmonic load is presented in this paper. Due to analyzing in small scale, a nonlocal elasticity theory is utilized. The governing equation and boundary conditions are derived based on the Euler-Bernoulli beam theory and Hamilton's principle. The material properties vary through the thickness direction. The harmonic moving load is modeled by Delta function and the FG nanobeam is simply supported. Using the Laplace transform the dynamic response is obtained. The effect of important parameters such as excitation frequency, the velocity of the moving load, the power index law of FG material and the nonlocal parameter is analyzed. To validate, the results were compared with previous literature, which showed an excellent agreement.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.145-151
• /
• 1995

The first-order Taylor series expansion can be evaluated analytically from the formulated symbolic nonlinear dynamic equations. A closed-form linear dynamic euation is derived about a nominal trajectory. The state space representation of the linearized dynamics can be derived easily from the closed-form linear dynamic equations. But manual symbolic expansion of dynamic equations and linearization is tedious, time-consuming and error-prone. So it is desirable to manipulate the procedures using a computer. In this paper, the analytic linearization is performed using the symbolic language MATHEMATICA. Two examples are given to illustrate the approach anbd to compare nonlinear model with linear model.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.15-25
• /
• 1997

The integration method of carier concentrations to redcue the discretization error of th box integratio method used in the discretization of the three-dimensional poisson's equation is presented. The carrier concentration is approximated in the closed form as an exponential function of the linearly varying potential in the element. The presented method is implemented in the three-dimensional poisson's equation solver running under the windows 95. The accuracy and the convergence chaacteristics of the three-dimensional poisson's equation solver are compared with those of DAVINCI for the PN junction diode and the n-MOSFET under the thermal equilibrium and the DC reverse bias. The potential distributions of the simulatied devices from the three-dimensional poisson's equation solver, compared with those of DAVINCI, has a relative error within 2.8%. The average number of iterations needed to obtain the solution of the PN junction diode and the n-MOSFET using the presented method are 11.47 and 11.16 while the those of DAVINCI are 21.73 and 23.0 respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1204-1210
• /
• 2000

An analysis method for obtaining transient response of electromagnetic pulse(EMP) coupled via a slot aperture into a parallel-plate waveguide, is considered. The mixed-potential integral equation(MPIE), in which the vector and scalar potential Green's functions for the unknown equivalent magnetic surface current of the aperture in parallel-plate region are expressed in closed forms derived by use of the improved complex image method, is formulated. When the method of moments(MoM) is used to solve the MPIE, the matrix-fill time is significantly reduced because of closed-form Green's functions. In order to check the validity of the present method, the numerical results obtained by the present method are compared with those obtained by the previous method. Fairly good agreements between them are observed.

• Earthquakes and Structures
• /
• v.26 no.2
• /
• pp.163-174
• /
• 2024

Dynamic equilibrium equations for finite element analysis were derived for the free field one-dimensional shear wave propagation through the horizontally layered soil deposits with the elastic half-space. We expressed Rayleigh's viscous damping consisting of mass and stiffness proportional terms. We considered two cases where damping matrices are defined in the total and relative displacement fields. Two forms of equilibrium equations are presented; one in terms of total motions and the other in terms of relative motions. To evaluate the performance of new equilibrium equations, we conducted two sets of site response analyses and directly compared them with the exact closed-form frequency domain solution. Results show that the base shear force as earthquake load represents the simpler form of equilibrium equation to be used for the finite element method. Conventional finite element procedure using base acceleration as earthquake load predicts exact solution reasonably well even in soil deposits with unrealistically high damping.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.31-36
• /
• 2016

The flash point is one of the most important indicators of the flammability of liquid solutions. The flash point is the lowest temperature at which there is enough concentration of flammable vapor to form an ignitable mixture with air. In this study the flash points of ternary liquid solutions, n-nonane+n-decane+n-dodecane system, were measured using Seta flash closed cup tester. The measured values were compared with the calculated values using Raoult's law and empirical equation. The calculated data by empirical equation described the measured values more effectively than those calculated by Raoult's law.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.344-356
• /
• 1999

A new and relatively simple equation for the soil water content-pressure head curve, ${\theta}$(h) is described in this paper. The particular form of the equation enables one to derive closed-form analytical expressions for the relative hydraulic conductivity, Kr, when substituted in the predictive conductivity models of Y. Mualem. Hopmans' equation is presented as an experimental method. The experienced method, $ET_a=K_sK_cET_o$ is introduced to estimate the actual evapotranspiration, $ET_a$(or $ET_c$). Using $ET_c$ and coil water data measured automatically in a weighing lusimeter, $K_s$ and $K_c$ values are estimated. Recently, FAO has introduced calculation procedures for the soil water(stress) coefficient, Ks in "Guidelines for computing crop water requirements".