• 한국경영과학회지
• /
• 제28권1호
• /
• pp.37-49
• /
• 2003

Using the concept of closed queueing network, we present a consistent way of interpreting existing duality relations among queueing systems. Also, using embedded Markov chains, we present a few new duality relations for the queueing systems with negative customers.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.139-144
• /
• 2011

We consider the stabilization problem for a class of networked control systems with random delays in the discrete-time domain. The controller-to-actuator and sensor-to-controller time-delays are modeled as two Markov chains, and the resulting closed-loop systems are Markovian jump nonlinear systems with two modes. The T-S (Takagi-Sugeno) fuzzy model is employed to represent a nonlinear system with Markovian jump parameters. The aim is to design a fuzzy controller such that the closed-loop Markovian jump fuzzy system is stochastically stable. The necessary and sufficient conditions on the existence of stabilizing fuzzy controllers are established in terms of LMIs (Linear Matrix Inequalities). It is shown that fuzzy controller gains are mode-dependent. Finally, a simulation example is presented to illustrate the effectiveness of the proposed design method.

• 대한정형도수물리치료학회지
• /
• 제7권2호
• /
• pp.23-39
• /
• 2001

Dysfunction of the anterior and dorsal muscles of the trunk have been studied in relation to low back pain of many years. Many muscles of the trunk are capable of contributing to the stabilization and protection of the lumbar spine, recent evidence has suggested that transversus abdominis may be critically involved and has been the focus of rehabilitation. The delay in onset of contraction of trunk muscles associated with movement of the upper or lower limb in patients with low back pain indicates a significant deficit in the automatic motor command for control of disturbance to the spine. The function of transversus abdominis has been largely ignored in the evaluation of spinal stabilization and protection. The most essential stabilizing muscles for the lumbar column are the transversus abdominis and the multifidus. Sling exercise therapy(SET) concept consists of a system of diagnosis and treatment. The system of diagnosis involves testing the muscle's tolerance through progressive loading in open and close kinetic chains. The SET system contains elements such as relaxation, increasing the range of movement, traction, training the stabilizing musculature, sensorimotor exercises, training in open and close kinetic chains, dynamic training of the mobilizing musculature, cardiovasc+ular exercises, group exercise, personal exercise at home. Sensorimotor training is an essential element of the SET concept. The emphasis is on closed kinetic chain exercises on an unstable surface, thereby achieving optimum stimulation of the sensorimotor apparatus.

• 대한조선학회논문집
• /
• 제49권2호
• /
• pp.132-145
• /
• 2012

Mooring fittings mean various devices and fittings to safely fasten vessels to quays, jetties and sea-floating buoys, etc. They include mooing winches, capstans, chocks, fairleads, guide rollers, bollards, and bitts. Not only the seats and reinforced parts for the installation of fittings but also ropes and chains for mooring and chain stoppers can be also considered. Because of damages to mooring fittings during mooring directly related to large-scale accidents such as the drifting of vessels, mooring fittings with strength appropriate for the physical features of the vessels must be installed. The reinforcement of the vessels on which the mooring fittings are installed must be designed to withstand the loads transferred from the fittings as well. Also mooring fittings with efficient strength should be required because damaged ships lead to sea pollution such as oil or fuel oil spillage. This study has been performed by the Finite Element Method for two aspects of closed chocks which are divided into structure-supporting shapes and working load. In the case of structure-supporting shapes, they have been performed in the field of sheet and bulwark. As for working load, it has been analyzed according to working load direction such as chock's side and below. At first, strength analysis for unique closed chocks has been carried out by using the Finite Element Method, they are applied for the situation when vessels pass by the panama canal. And then the experiment has been done to verify the analyzed date obtained by FEM. The experimental results were found to be similar to the numerical results with up to 16% difference. On the basis of the results obtained, standardization has been carried out by the Finite Element Method for various sizes of closed chocks.

• 디지털융복합연구
• /
• 제20권5호
• /
• pp.211-220
• /
• 2022

본 연구는 폐쇄루프 공급망을 최적화하기 위한 녹색 폐쇄루프 공급망 네트워크(GCSN)를 제안한다. GCSN은 물류 유통과정에 투입되는 익스프레스 박스의 재활용에 중점을 두고 연구하였다. 이를 통해 물류공급망 작업의 표준화와 전자상거래 업체의 증가에 따른 익스프레스 박스의 사용의 가속화와 전자상거래 업계의 익스프레스 상자의 재활용을 통한 자원 낭비를 최소화하는 녹색공급망을 추진한다. GCSN은 유통흐름과 자원의 투입요소는 수학식으로 표현하며 LINGO를 사용하여 구현된다. 녹생 즉, 환경 보호의 관점에서 전자상거래 산업의 지속가능한 발전을 견인하는 유통의 과정이다. 또한 자원 부족에 따른 원자재 가격 상승에 대응하고 전자상거래 업체들의 친환경적으로 익스프레스 상자를 투입하는 전략의 필요성을 부각시켰다. 이와 같은 이유로 본 연구는 전자상거래 업체에서 사용하는 재활용이 가능한 익스프레스상자를 연구대상으로 하며, 공급망 네트워크에서 시설 위치와 할당문제도 통합적으로 고찰한다. 마지막으로 본 연구의 결론과 시사점을 도출하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2057-2062
• /
• 2003

Chained form mobile robots have been studied from the viewpoint of the control and analysis of nonholonomic mechanical systems in literature. However, researches for the detailed closed form kinematic modeling are rarely progressed. Nothing that a chained form mobile robot can be considered as a parallel system including several chains and wheels, the transfer method using augmented generalized coordinates is applied to obtain inverse and forward kinematic models of chained form mobile robots. Various numerical simulations are conducted to verify the effectiveness of the suggested kinematic model.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.550-559
• /
• 2004

In this paper, a recursive formulation for generating the equations of motion of spatial mechanical systems is presented. The rigid bodies are replaced by a dynamically equivalent constrained system of particles which avoids introducing any rotational coordinates. For the open-chain system, the equations of motion are generated recursively along the serial chains using the concepts of linear and angular momenta Closed-chain systems are transformed to open-chain systems by cutting suitable kinematic joints and introducing cut-joint constraints. The formulation is used to carry out the dynamic analysis of multi-link five-point suspension. The results of the simulation demonstrate the generality and simplicity of the proposed dynamic formulation.

• 대한산업공학회지
• /
• 제33권4호
• /
• pp.439-446
• /
• 2007

A new location model, where the demand varies by periods, and the facility at each period can be open or closed depending on the demand, is discussed in this paper. General facility location problem is extended with the assumption that demands per period vary. A mixed integer programming is suggested and the solution is found for various instances which are randomly generated. Instances included various cases with respect to the length of periods, moving distance of customer locations, and cost structure. The characteristics of optimal solutions are analyzed for various cases, and it is shown that demand changing location model can be applied in a practical fields of supply chains.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.507-512
• /
• 1997

This paper presents a method of finding optitnal joint torques of two robots when they hold an object simultaneously. Although the importance of the multiple cooperating robot system increases for more flcviblc ni;mufacturing automation, dynamic solutions to multi-robot system forming closcd kinematic chain is not easy to find. Newton-Eulcr approach is used for the dynamic formulation of two robots fonn~ng closcd kincmatic chains gmsping a rigid body object. The nrcthodology to optimize the joint torques to satisfy given criterta and obtain bettcr control of the system is discussed. The scheme is illustrated by an example.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.235-240
• /
• 2001

A four degrees of freedom (dof) motion platform for bicycle simulator is developed. The motion platform, capable of the vertical linear and three angular motions, is designed based on analysis of the typical motion characteristics revealed by the existing six dof bicycle simulator. The platform essentially consists of two parts： the three dof parallel manipulator, consisting of a moving platform, a fixed base and three actuators, and the turntable to generate the yaw motion. The nonlinear kinematics and dynamics of the three dof parallel manipulator with multiple closed loop chains are analyzed for tracking control of the motion platform. The tracking performances of the three control schemes are experimentally compared： the computed torque method (CTM), the sliding mode control (SMC) and the PD control. The CTM and SMC, incorporated with the system dynamics model, are found to be equally better in performance than the PD controller, irrespective of the presence of external disturbance.