• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1998년도 학술발표회 논문집
• /
• pp.632-637
• /
• 1998

The purpose of this study of this study is to find tide and tidal current variation by three dimensional numerical model of tide and tidal current in the bay of Cheonsu in Korea. On the basis of the observed data on water temperature and salinity data and wind data of summer(July) in the bay of Cheonsu in Korea, water circulation in the bay of Cheonsu is investigated with use of a robust diagnostic numerical model, including calculated co-range and co-tidal charts of M2 tide are similar to the observed ones. The residual flow Pattern at the surface layer during summer formed clockwise circulation in the front coastal the dike of the Sosam A zone(Ganwor island) and Taeju island. The residual flow pattern at the 15m layer during formed clockwise circulation in the front Taeju island. The residual flow Pattern at the surface layer formed anti-clockwise circulation in the upper Sangmok and Naepasu island.

• 자원환경지질
• /
• 제29권4호
• /
• pp.509-522
• /
• 1996

A total of 460 palaeomagnetic samples was collected from the Tertiary Chongja-Ulsan basins and surrounding area in the southeastern part of Korean peninsula. All samples were stepwise demagnetized by either alternating field or thermal method. It was found that most sample-sites have ChRM declination which has been rotated clockwise from the north-south reference direction of Tertiary East Asia, although other two extrusive sample-sites within the Chongja sedimentary basin show counterclockwise rotation of ChRM declination. Fold tests for the site-mean ChRMs of the latter two sites reveal insignificant result and negative result with 95% confidence level, respectively. The amount of the clockwise deflection of declination varies from about $20^{\circ}$ upto about $80^{\circ}$ according to the block to which each sample-site belongs. The amount of the counterclockwise deflection is about $20^{\circ}$. It is concluded that the clockwise ChRM rotation has been caused by dextral simple shearing accompanied by NNW-SSE spreading of the East Sea which has been active until about 16Ma, and that the counterclockwise rotation is a result of sinistral simple shearing associated with WNW-ESE contraction in the Korean Strait-SW Japan region at about 15 Ma.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.14-17
• /
• 2010

7개 스월 인젝터 연소기의 스월 방향에 따른 유동 특성을 파악하기 위하여 3차원 Large Eddy Simulation(LES)을 수행하였다. 해석에 이용된 연소기 모델은 Georgia 공대 Aerospace Combustion Laboratory의 LRE combustor를 이용하였으며, 경계 조건은 실험에서 얻어진 값을 적용하였다. 7개 인젝터의 스월 방향을 모두 동일한 방향으로 설정하였을 경우, 스월 유동간의 간섭이 증가하게 되고, 연소실 벽면에서 강한 원주방향의 속도 분포가 형성되는 것을 관찰하였다. 또한 연소실 내 압력변동폭은 인젝터의 스월 방향을 상반되게 설정하였을 때보다 현저히 증가한 것을 확인하였다.

• 대한치과교정학회지
• /
• 제15권1호
• /
• pp.123-140
• /
• 1985

Variation in the facial pattern and effect of the rotational jaw growth on the facial proportion were studied in serial cephalometric radiographs of 40 Korean children (25 boys, 15 girls) ranging in age from 6 to 13 years. According to Y-axis (N-S-Gn) growth change during the 7 years of period, the subject who had exhibited 'wave-like' manner of Y-axis growth change within ${\pm}\;2^{\circ}$ was classified to the Parallelwise group and the subject who had exhibited Y-axis increase more than $+2^{\circ}$ was classified to the Clockwise rotation group and the subject who had exhibited Y-axis decrease more than $-2^{\circ}$ was classified to the Counterclockwise rotation group. For the comparison of each group, a total of 22 morphologic variables were employed and the data were analyzed by means of computer morphometrics and statistical methods. On the basis of the finding of this study, the following trends were established. 1. The Parallelwise group was $75\%$, the Clockwise rotation group was $12.5\%$ and the Counter-clockwise rotation group was $12.5\%$. 2. The growth pattern of cranial base was related to the rotation of mandible. 9. Maxillary prognathism was occured in the Counterclockwise rotation group and the rotation of palatal plane was occured in the Clockwise rotation group. 4. Mandibular prognathism was occured in the Parallelwise and the Counterclockwise rotation groups, especially in the Counterclockwise rotation group. 5. The degree of maxillo-mandibular divergency was constant in the Clockwise rotation group but decreased in the Counterclockwise rotation and the Parallelwise groups, especially in the Counterclockwise group. 6. There were no differences in the size of the anterior upper facial height (N-ANS) and the posterior lower facial height ((Go-Me)-PNS) but there were differences in the size of the anterior lower facial height (ANS-Me) and the posterior upper facial height ((S-N)-PNS) between each group. 7. The growth increment and the size of the facial depth was not related to the growth pattern of the face but the growth increment and the size of the facial height was related to the growth pattern of the face. 8. Proportional change due to the facial growth rotation was concentrated in the anterior lower face. 9. The most apparent difference between each group was happened in the size of the posterior cranial base (S-Ba) and the facial length (S-Gn).

• 산업공학
• /
• 제17권1호
• /
• pp.104-112
• /
• 2004

The purposes of the study were twofold: to investigate the stereotype of position and direction that the users expect when operating the handles of a water faucet in different directions, and to collect information about user’s preferred directions. Six hundred subjects, aged from teens to over sixties, participated in the experiment with the procedure of showing them actual water faucets of a lever-type handle and two round-shaped handles mounted on the sink(horizontal plane) and wall(vertical plane). The water faucets presented to the subjects were most widely used devices in our living environment. The results showed that when the handle of the lever-type water faucet was in the 'up' position, 63% of the subjects expected the device was 'open'. When the cold hot separated water faucets were mounted on the horizontal or vertical plane, over 50% of those who answered the 'open' direction of round type handles responded as 'counter clockwise' for a 'hot' water faucet and 'clockwise' for a 'cold' water faucet. In conclusion, this study suggests that water faucet devices be designed and installed in the way that the users expect them to operate.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.729-736
• /
• 2013

The turbulent properties in a mixed statistically stationary flow were investigated experimentally by a pseudo stereoscopic PIV. In order to validate the experimental results, the profiles of the turbulent kinetic energy were evaluated with the flow features. A mechanical agitator having 6 blades was installed at the bottom of the mixing tank (D=60cm, H=60cm). The agitator was rotated with 80rpm clockwise and counter-clockwise. For the measurements, three cameras were used and all were synchronized. The images captured by one of the three cameras was used for the measurement of rotational speed, and the images captured by the other two cameras were used to measure three dimensional components of velocity vectors. All vectors captured at the same rotational angle were phase averaged to construct three-dimensional vector fields to reconstruct the spatial distribution of the flow properties. It was seen that the jet scrolling along the tank was the main source of mixing.

• 한국경영과학회지
• /
• 제26권4호
• /
• pp.99-108
• /
• 2001

In the ring loading problem with demand splitting, traffic demands are given for each pall of nodes in an undirected ring network and a flow is routed in either of the two directions, clockwise and counter-clockwise. The load of a link is the sum of the flows routed through the link and the objective of the problem is to minimize the maximum load on the ring. The fastest a1gorithm to date is Myung, Kim and Tcha＇s a1gorithm that runs in Ο(n｜K｜) time where n is the number of nodes and K is the index set of the origin-destination pairs of nodes having flow traffic demands. Here we develop an a1gorithm for the ring loading problem with demand splitting that improves the rerouting step of Myung, Kim and Tcha＇s a1gorithm arid runs in Ο(min{n｜K｜, n$^2$}) time.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.112-118
• /
• 2007

Recently, the machine tools called multi-task machines, which mounted rotary axes on the table or spindle are used increasingly. Accordingly, multi-task machine tool takes a growing interest on the motion accuracy of feed drive system. In this study, measurement and diagnosis of motion errors ware attempted from circular pattern obtained by using DBB (Double ball bar) device. Those were obtained at both clockwise and counter clockwise motions in mutually perpendicularly intersecting three planes. The reliability of error measurement system for multi-task machine tool was verified by the direct test cutting.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.31-37
• /
• 2007

Recently, the machine tools called multi-task machines, which mounted rotary axes on the table or spindle are used increasingly. Accordingly, multi-task machine tool takes a growing interest on the motion accuracy of feed drive system. In this study, measurement and diagnosis of motion errors ware attempted from circular pattern obtained by using DBB (Double ball bar) device. Those were obtained at both clockwise and counter clockwise motions in mutually perpendicularly intersecting three planes. The reliability of error measurement system for multi-task machine tool was verified by the direct test cutting.

• Fisheries and Aquatic Sciences
• /
• 제10권4호
• /
• pp.220-225
• /
• 2007

The movements of skipjack schools during purse seine operations were observed by scanning sonar in the Southwest Pacific Ocean in April 2004. Swimming speed and directional changes were analyzed in relation to heading of the purse seine during shooting, speed of the purse seiner and distance to the net. Escaped schools turned clockwise (relative to the heading of the purse seiner during shooting) significantly more frequently than captured schools, who primarily turned counter-clockwise. The swimming speed of a fish school, whether it was caught or escaped, was somewhat related to the ship's speed, but swimming speed did not differ between captured and escaped schools. The behavior of skipjack schools during purse seining consists of very complex movements with changes in swimming speed and direction in relation to the nets or purse seiner. Therefore, these responses of skipjack schools to purse seining can be useful for modeling the capture process of purse seining in relation to fishing conditions.