• ETRI Journal
• /
• 제30권2호
• /
• pp.275-281
• /
• 2008

A 40 Gb/s clock and data recovery (CDR) module for a fiber-optic receiver with improved phase-locked loop (PLL) circuits has been successfully implemented. The PLL of the CDR module employs an improved D-type flip-flop frequency acquisition circuit, which helps to stabilize the CDR performance, to obtain faster frequency acquisition, and to reduce the time of recovering the lock state in the event of losing the lock state. The measured RMS jitter of the clock signal recovered from 40 Gb/s pseudo-random binary sequence ($2^{31}-1$) data by the improved PLL clock recovery module is 210 fs. The CDR module also integrates a 40 Gb/s D-FF decision circuit, demonstrating that it can produce clean retimed data using the recovered clock.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.239-248
• /
• 1997

The nesting of parts cut on raw steel plate has been a subject of interest to the shipbuilding industry for many years. "Nesting" is defined operation of layout of the parts on the raw material with minimizing the waste rate. Therefore, it is very important to optimize the cutting area. Since the existing nesting programs are prepared for expensive workstations and the expert, it is needed to develop nesting program for personal computer to improve the technology of small/middle sized shipyards and their productivity. This study involves development and application of appropriate optimization technique to solve the problem of plate nesting. And the appropriate D/B for storing nesting data developed, the function of D/B is introduced in this paper.his paper.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.191-199
• /
• 1997

This paper develops the piece creation of Hull-structure using PC(Personal Computer) which is from CADRA of graphic program. Large-sized shipbuilding yard was carried out on the development of CNC(Computer Numerical Control) auto cutting system used in super S/W such as AUTODEF, TRIBON. But this system needs lots of expenses and high technician, and only used in large-sized shipbuilding yard, not medium-sized and small-sized shipbuilding yard. To bring up the small and medium-sized ship building yard lacking a little competitive power. Small and medium-sized shipbuilding yard need the piece creation of Hull Structure S/W which is joined with the CADRA. Therefore the piece creation of Hull-Structure S/W is developed to joined with the CADRA of graphic S/W to create the piece to be needed on as auto cutting process using PC.

• 대한환경공학회지
• /
• 제31권5호
• /
• pp.364-370
• /
• 2009

정수처리공정에서 안정적인 탁도 관리가 날이 갈수록 중요해지고 있다. 따라서 침전 효율 향상을 위한 플록형성 공정의 최적화는 매우 중요하다. 우리는 전산유체역학적 방법을 이용하여 플록큐레이터의 회전방향(시계방향, 반시계방향)에 따른 플록 형성지 내 유동특성을 평가하였다. 평가 결과, 플록큐레이터가 시계방향으로 회전하는 경우는 플록큐레이터 회전방향과 수류 흐름이 일치하는 수표면 쪽에서 유동이 강해지고 유출량의 분산 및 표준편차는 각각 8.5, 2.9로 나타났다. 반면에 플록큐레이터가 반시계 방향으로 회전하는 경우는 플록큐레이터 회전방향과 수류 흐름이 일치하는 바닥 쪽에서 유동이 강해지고 유출량의 분산 및 표준편차는 각각 5.3, 2.3으로 나타났다. 또한 플록형성지 유출량은 1,2단 플록큐레이터 회전방향보다는 3단 플록큐레이터의 회전방향에 의해 주로 영향을 받으며 3단 플록큐레이터가 반시계방향으로 회전하는 경우가 시계방향으로 회전하는 경우보다 유출량의 편차가 적기 때문에 침전지의 균등한 흐름을 위해 유리하다.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.113-119
• /
• 1998

An experimental study was carried out in a three-dimensional cubic cavity driven by 2-dimensional plane Poiseuille flow for three kinds of Reynolds number, $10^4$, 3 $\times$ $10^4$ and 5 $\times$ $10^4$ based on the cavity width and cavity inlet mean flow velcoity. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system. Laser based illumination and two-frame grey-level cross correlation algorithm are adopted. Severe unsteady flow fluctuation within the cavity are remarkable at above Re = 3 $\times$ $10^4$ Reynolds numbers and sheared mixing layer phenomena are also found at the region where inlet driving Poiseuille flow is collided with the clock-wise rotating main primary vortex at upper center area. Instant velocity profiles reveal that deformed forced vortex formation is observed throughout the separate two areas.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.557-563
• /
• 1997

The unsteady flow in three-dimensional cubic cavity with narrow channel at upper region is investigated experimentally for three kinds of Reynolds number, 1*10/sup 4/, 3*10/sup 4/ and 5*10/sup 4/ based on the cavity width and cavity inlet mean flow velocity. Instant velocity vectors are obtained simultaneously at whole field by PIV(Particle Image Velocimetry). Wall pressure distributions are estimated using Poisson equation from the velocity data. Results of PIV reveal that severe unsteady flow fluctuation within the cavity are remarkable at all Reynolds numbers and sheared mixing layer phenomena are also found at the region where inlet driving flow is collided with the clock-wise rotating main primary vortex. Instant velocity profiles reveal that deformed forced vortex formation is observed throughout the entire region and spanwise kinetic energy migration is conspicuous.

• 한국임상수의학회지
• /
• 제11권1호
• /
• pp.383-387
• /
• 1994

The purpose of this report is to describe the radiographic patterns of canine gastric dilatation-volvulus syndrome derived from a case. Radiographs showed the presence of a large amount of gas, fluid and ingesta within the stomach. The gas-filled pyloric antrum was present in the left cranial abdomen in the ventrodorsal view, and located dorsal and slightly cranial to the gas-filled fundus of the stomach in the right lateral recumbent and standing lateral view. On the right lateral recumbent view, the gas-filled stomach was compartmentalized by a soft-tissue dense band caused by the pyloric antral wall folding back and contacting the fundic wall. It was thought that the gastric volvulus in this case occurred In a clock. wise direction by radiographic findings.

• Research in Vestibular Science
• /
• 제17권4호
• /
• pp.167-169
• /
• 2018

Rotatory vertebral artery syndrome (RVAS) is characterized by recurrent attacks of vertigo, nystagmus, and syncope induced by compression of the vertebral artery during head rotation. A 60-year-old man with atlas vertebrae fracture presented recurrent attacks of positional vertigo. Left-beat, upbeat and count clock-wise torsional nystagmus occurred after lying down and bilateral head roll (HR) showing no latency or fatigue. Magnetic resonance imaging revealed foramen magnum stenosis (FMS) and dominancy of right vertebral artery (VA). The flow of the right VA on transcranial Doppler decreased significantly during left HR. The slower the velocity was, the more the nystagmus was aggravated. RVAS can be evoked by FMS causing compression of the VA. And the nystagmus might be aggravated according to the blood flow insufficiency.

• 대한전자공학회논문지SD
• /
• 제46권10호
• /
• pp.61-69
• /
• 2009

본 논문은 저 복잡도와 높은 throughput을 지원하는 LDPC 부호화기의 구조에 대하여 제안한다. LDPC 부호화기가 갖는 높은 복잡도 문제를 해결하기 위하여 기존의 복잡도가 높은 행렬 곱셈 연산기 대신에 간소화된 행렬 곱셈 연산기가 제안되었다. 또한 높은 throughput을 지원하기 위하여 행렬 곱셈 연산시 행 방향 연산 및 부분 병렬처리 연산을 적용하였다. 제안된 부호화기 구조의 로직 게이트와 메모리 사용량은 기존의 5단 파이프라인 부호화기의 구조에 비하여 각각 37.4%와 56.7%씩 감소하였다. 또한 40MHz 클럭 주파수에 대해 기존의 부호화기에 비하여 3배 이상의 throughput인 최대 800Mbps의 throughput을 지원한다.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.799-810
• /
• 2009

With time, the stable management of turbidity is becoming more important in the water treatment process. So optimization of coagulation is important for the improvement of the sedimentation efficiency. we evaluated the mixing and hydrodynamic behavior in the coagulation basin using Computational Fluid Dynamics (CFD). The items for evaluation are a location and the speed of agitator and angle of an injection pipe. The results of the CFD simulation, the efficacy of mixing in the coagulation basin was not affected according to one or two injection pipe and angle of an injection pipe. If there is a agitator near outlet of coagulation basin, the efficacy of mixing don't improve even though the speed of agitator increase. So location of agitator is perfect when it locate center at the inlet stream. The coagulation basin at this study, the proper speed of agitator is form 20rpm to 30rpm.