• 제목/요약/키워드: Clinical laboratory science techniques

검색결과 72건 처리시간 0.032초

Erythrocyte Sedimentation Rate: Its Determinants and Relationship with Risk Factors Involved in Ischemic Stroke

  • Kaur, Kirandeep;Kaur, Amandeep;Kaur, Anupam
    • 대한임상검사과학회지
    • /
    • 제54권1호
    • /
    • pp.1-8
    • /
    • 2022
  • Erythrocyte sedimentation rate (ESR) evaluation is a useful tool for monitoring disease activity in various inflammatory and non-inflammatory conditions. ESR is known to be influenced by a multitude of confounding factors. The present study aimed to assess the possible determinants of the ESR and its relationship with various risk factors involved in ischemic stroke. ESR and other hematological and biochemical parameters were investigated in 163 ischemic stroke patients (107 males and 56 females) selected based on imaging techniques including magnetic resonance imaging (MRI) or computed tomography (CT) scans. Statistical analysis was performed using the SPSS 16.0 software. Linear regression analysis showed a significant inverse relationship of hemoglobin (Hb) and hematocrit or packed cell volume (PCV) (P<0.001 for females; P<0.01 for males) with the ESR. It was observed that the red blood cell (RBC) count was not strongly correlated with the ESR (P<0.05 for both males and females). It was also observed that sex significantly affected the variables determining the ESR levels, whereas age had no effect. Gender differences were also observed with respect to Hb, RBC, PCV, mean corpuscular hemoglobin (MCH), mean corpuscular hemoglobin concentration (MCHC), and ESR. The possible determinants of higher ESR levels in ischemic stroke may be sex, Hb, hematocrit, and RBC count, but the role of other clinical and laboratory parameters cannot be underestimated.

Biomechanical comparison of bone staple techniques for stabilizing tibial tuberosity fractures

  • Kyu-Tae Park;Min-Yeong Lee;Hwi-Yool Kim
    • 대한수의학회지
    • /
    • 제63권3호
    • /
    • pp.24.1-24.6
    • /
    • 2023
  • This study compared the biomechanical properties of bone-stapling techniques with those of other fixation methods used for stabilizing tibial tuberosity fractures using 3-dimensionally (3D)-printed canine bone models. Twenty-eight 3D-printed bone models made from computed tomography scan files were used. Tibial tuberosity fractures were simulated using osteotomy. All samples were divided into 4 groups. Group 1 was stabilized with a pin and tension-band wire; group 2, with a pin and an 8 mm-wide bone staple; group 3, with 2 horizontally aligned pins and an 8 mm-wide bone staple; and group 4 with a 10 mm-wide bone staple. Tensile force was applied with vertical distraction until failure occurred. The load and displacement were recorded during the tests. The groups were compared based on the load required to cause displacements of 1, 2, and 3 mm. The maximum failure loads and modes were recorded. The loads at all displacements in group 4 were greater than those in groups 1, 2, and 3. The loads at 1, 2, and 3 mm displacements were similar in groups 1 and 3. There was no significant difference between groups 1 and 3. Groups 1 and 4 provided greater maximum failure loads than groups 2 and 3. Failure occurred because of tearing of the nylon rope, tibial fracture, wire breakage, pin bending, and fracture around the bone staple insertion. In conclusion, these results demonstrate that the bone-stapling technique is an acceptable alternative to tension-band wire fixation for the stabilization of tibial tuberosity fractures in canine bone models.

Detection of Mycobacterium leprae by Real-time PCR Targeting Mycobacterium leprae-Specific Repetitive Element Sequence

  • Jin, Hyun-Woo;Wang, Hye-Young;Kim, Jong-Pill;Cho, Sang-Nae;Lee, Hye-Young
    • 대한의생명과학회지
    • /
    • 제16권2호
    • /
    • pp.127-131
    • /
    • 2010
  • Mycobacterium leprae detection is difficult even with molecular biological techniques due to the low sensitivity of current methodologies. In this report, real-time PCR targeting the M. leprae-specific repetitive element (RLEP) sequence was developed as a new diagnostic tool and evaluated using clinical specimens. For this, M. leprae DNAs were extracted from skin biopsy specimens from 80 patients and analyzed by real-time PCR using TaqMan probe. Then, the detection efficiency of the real-time PCR was compared with that of standard PCR. In brief, the rate of positive detection by the standard PCR and real-time PCR was 32.50% and 66.25%, respectively. The results seemed to clearly show that the TaqMan real-time PCR developed in this study may be a useful tool for sensitive detection of M. leprae from clinical specimens.

Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and three-dimensional replica techniques

  • Kim, Ki-Baek;Kim, Jae-Hong;Kim, Woong-Chul;Kim, Hae-Young;Kim, Ji-Hwan
    • The Journal of Advanced Prosthodontics
    • /
    • 제5권2호
    • /
    • pp.179-186
    • /
    • 2013
  • PURPOSE. One of the most important factors in evaluating the quality of fixed dental prostheses (FDPs) is their gap. The purpose of this study was to compare the marginal and internal gap of two different metal-ceramic crowns, casting and selective laser sintering (SLS), before and after porcelain firing. Furthermore, this study evaluated whether metal-ceramic crowns made using the SLS have the same clinical acceptability as crowns made by the traditional casting. MATERIALS AND METHODS. The 10 study models were produced using stone. The 20 specimens were produced using the casting and the SLS methods; 10 samples were made in each group. After the core gap measurements, 10 metal-ceramic crowns in each group were finished using the conventional technique of firing porcelain. The gap of the metal-ceramic crowns was measured. The marginal and internal gaps were measured by two-dimensional and three-dimensional replica techniques, respectively. The Wilcoxon signed-rank test, the Wilcoxon rank-sum test and nonparametric ANCOVA were used for statistical analysis (${\alpha}$=.05). RESULTS. In both groups, the gap increased after completion of the metal-ceramic crown compared to the core. In all measured areas, the gap of the metal cores and metal-ceramic crowns produced by the SLS was greater than that of the metal cores and metal-ceramic crowns produced using the casting. Statistically significant differences were found between cast and SLS (metal cores and metal-ceramic crown). CONCLUSION. Although the gap of the FDPs produced by the SLS was greater than that of the FDPs produced by the conventional casting in all measured areas, none exceeded the clinically acceptable range.

선택적 수술에서 교차시험/수혈비를 활용한 혈액요청의 적정성 평가에 관한 연구 (Evaluation of Appropriateness of Blood Order Based on Crossmatching to Transfusion Ratio in Elective Surgery)

  • 장영도;김재수;김민중;노태준;이상일
    • 대한임상검사과학회지
    • /
    • 제36권2호
    • /
    • pp.158-162
    • /
    • 2004
  • The over-preparation of blood for elective surgery causes some problems such as returning of blood, inefficient task and loss of reagents. In recent blood transfusion practice, there has been changing patterns of blood use in elective surgery as various side effects of transfusion have become known and operation techniques are developed. This study was performed to evaluate the optimal utilization of blood for various elective and/or emergency surgery. We surveyed the quantity of blood transmitted to wards, returned to blood bank, and the number of crossmatching test done for the elective surgery of the patients at the D. University Hospital, the tertiary teaching hospital from August 1, 2001 to October 31, 2001. Crossmatched to transfusion ratio (C/T ratio) was calculated, in which C means the unit of accomplished crossmatching test and T means the unit of transfused blood component. The unit of transfused blood was analysed in terms of issuing time, sex, age, clinical department, and blood component type. The usage of bloods for the emergency surgery was also analyzed. In our study, C/T ratio was highest on Monday (1.54) and Tuesday (1.53), and higher in female patients(1.54) than in male patients (1.32). No significant relationship was observed between age groups. Among clinical departments, thoracic and cardiovascular surgery showed the highest C/T ratio (1.54). From above results, we could be sure that the management of transfusion practice was relatively appropriate in recent years, although the entire introduction of type and screen (T&S) method was desirable. If the T&S method is performed, the C/T ratio would be almost 1.00 and it would also relieve the duty of blood bank.

  • PDF

Enterotoxigenic Bacteroides fragilis에 의한 질환과 검출 (Enterotoxigenic Bacteroides fragilis-Associated Diseases and Detection)

  • 권선영;장인호;이기종
    • 대한임상검사과학회지
    • /
    • 제47권4호
    • /
    • pp.161-167
    • /
    • 2015
  • 정상인에서 장내세균은 숙주의 면역이나 영양 흡수를 돕지만, 때로는 기회감염균으로서 그들을 위협하기도 한다. 그 중 절대 혐기성 세균인 Bacteroides fragilis는 분비되는 장독소(enterotoxin)인 Bacteroides fragilis toxin (BFT)의 유무에 따라 non-enterotoxigenic B. fragilis (NTBF)와 enterotoxigenic B. fragilis (ETBF)로 나뉜다. ETBF는 가축 및 사람에서 설사 질환 및 대장 질환을 유발한다 그러나 때때로 ETBF를 가지고 있으나 증상이 없는 사람도 존재한다. ETBF는 염증성 설사 질환, 여행자 설사 환자의 대변에서 검출되어 주목 받고 있다. 또한, 몇몇 연구를 통해 inflammatory bowel disease (IBD)나 대장염 및 대장암 환자에서 ETBF가 증가한다는 것이 밝혀졌다. 일반 C57BL/6 마우스 및 germ-free 마우스, multiple intestinal neoplasia (Min) 마우스, 토끼, Mongolian gerbil 등 여러 동물 모델에서 ETBF가 IBD나 대장염, 대장암을 유발 또는 촉진한다는 것이 발표되었다. ETBF의 유일한 병원성 인자인 BFT는 E-cadherin의 분절을 유도하여 장상피 세포의 투과성을 높인다. 이어서 ${\beta}$-catenin 신호전달계가 활성화하여 장상피세포의 증식이 증가한다. 또한 ETBF의 감염은 일반 마우스에서 급성이나 만성의 대장염을 일으키고 Min 마우스에서 종양 형성을 촉진한다. 이는 Stat3에 의존한 $T_H17$ 면역반응의 활성화를 통해 일어난다. 현재 ETBF의 검출 방법에는 크게 BFT toxin assay와 몇 가지 PCR 방법이 있다. 최근 real-time PCR과 같은 분자진단학적 기법의 발달로 일반적인 PCR보다 더 정확한 ETBF의 검출이 가능하게 되었다. 이것을 이용하여 앞으로 실제 임상에서 ETBF와 대장염 및 대장암의 발달 관계에 대한 심도 깊은 연구가 이뤄질 것으로 본다.

SARS-CoV-2의 진단기술 (Diagnostic Techniques for SARS-CoV-2 Detection)

  • 김종식;강나경;박선미;이은주;정경태
    • 생명과학회지
    • /
    • 제30권8호
    • /
    • pp.731-741
    • /
    • 2020
  • 코로나바이러스감염증-19(COVID-19)는 SARS-CoV-2에 의해 발병된다. 지금까지 인간에게 감염되는 7 가지 종류의 코로나 바이러스가 보고되었다. 그 중, HCoV-229E, HCoV-OC43, HCoV-NL63, 그리고 HCoV-HKU1 등 4종류의 코로나바이러스는 감기와 같은 단순 호흡기 질환을 유발한다고 보고되었다. 반면, SARS-CoV는 2002년에, MERS-CoV는 2012년에 각각 대유행을 일으킨 바 있다. 가장 최근에는 2019년 12월 중국 우한에서 처음 보고된 SARS-CoV-2가 전세계적인 대유행의 원인이 되고 있다. 이러한 SARS-CoV-2를 진단하고, 치료하고, 예방하기 위해서는 신속 정확한 진단키트, 치료제, 그리고 안전한 백신의 개발의 필수적으로 요구된다. 이러한 강력한 도구들을 개발하기 위해서는 SARS-CoV-2의 표현형, 유전자형, 그리고 생활주기 등의 연구가 선행되어야 한다. SARS-CoV-2의 진단기술은 현재 크게 두가지의 큰 분야인 분자진단과 면역혈청학적 진단으로 구분할 수 있다. 분자진단의 경우 SARS-CoV-2의 유전체를 대상으로 하며, 면역혈청학적 진단은 SARS-CoV-2의 항원 단백질 혹은 SARS-CoV-2에 대한 항체를 대상으로 한다. 본 총설에서는 SARS-CoV-2의 표현형, 유전체 구조, 그리고 유전자 발현에 대해서 정리하고, SARS-CoV-2에 대한 다양한 진단 기술 등에 대한 기초지식을 제공하고자 한다.

골격근세포에서 구리에 의한 마이오카인 apelin의 발현 (Copper Regulates Apelin Expression in L6 Skeletal Muscle Cells)

  • 권기상;박진솔;최영은;이은령;유재은;박혜원;권오유
    • 생명과학회지
    • /
    • 제33권9호
    • /
    • pp.724-729
    • /
    • 2023
  • 본의 연구 결과는 무기질 구리가 전사, 번역 및 번역 후의 여러 단계에서 아펠린 생합성에 억제 효과를 발휘한다는 것을 명확하게 보여준다. 그러나 바토쿠프로인디설폰산의 구리 킬레이터로 처리하면 구리의 억제 영향이 효과적으로 역전되어 포유류 골격근 세포에서 아펠린 생합성의 구리 의존적 특성이 확인되었다. 이러한 결과는 구리가 마이오카인 아펠린의 생합성 조절에 중요한 역할을 한다는 최초의 보고이며, 구리 관련한 근육감소증의 예방 및 치료의 전략 개발에 유용한 실마리를 제공할 수 있다.

육안검사기술의 실무적 이해 (Practical Understanding of Gross Examination Techniques)

  • 지우현
    • 대한임상검사과학회지
    • /
    • 제56권1호
    • /
    • pp.89-98
    • /
    • 2024
  • 육안검사는 정확한 병리조직학적 진단을 위해 수술, 내시경 검사에서 채취된 검체를 육안검사를 통해 암의 육안정보를 기록하고 병변은 현미경 표본을 만들기 위해 절편을 채취하는 행위이다. 육안검사의 기술은 간결하고 정확한 표현, 적절한 구조화, 충분한 절제, 중요정보에 대한 오류가 없는 표준화, 복잡한 검체의 사진 도표화가 이루어져야 한다. 병리학적 판독의 만족도를 높이기 위해서는 육안검사에 대한 이해가 충분한 이론적 실무적 바탕에서 신뢰를 얻기 위한 정확하고 신중히 수행해야 하는 업무이다. 육안검사 분야에서 임상병리사들의 경험을 바탕으로, 추가 표본 유형이 실행 가능한 후보로 식별되고 치료 측면에서 요구와 우려 사항을 신중하게 고려해야 한다. 또한, 각 기관의 부서에서는 임상과의 파트너쉽, 지속적인 전문인력 양성, 진단오류 및 가치 기반의 의료제공에 대한 국가적 초점 측면에서 검토해야 할 것이다.

국제적인 10~20 전극시스템의 실용적인 방법에 관한 연구 (Study of Practical Method for International 10~20 Electrode System)

  • 김성희;이옥경;김대진
    • 대한임상검사과학회지
    • /
    • 제53권1호
    • /
    • pp.60-67
    • /
    • 2021
  • 뇌파검사는 뇌전증의 진단과 뇌 기능을 검사하는 것으로 이용된다. 임상병리사는 뇌파검뇌파 시행할 때 International 10~20 electrode system에 따라 정확하게 전극을 부착하고 인공산물 없이 의사들이 정확한 판독을 할 수 있게 뇌파를 기록하는 업무를 담당한다. 이러한 뇌파검사를 시행하는 임상병리사를 양성하기 위해 대학의 교육과정에서 실습시간을 통해 실무능력을 배양하게 되는데, 뇌파검사의 경우 정확한 전극 부착위치를 찾는 것이 학생들의 애로사항이었다. 본 연구에서는 전극부착위치를 쉽고 신속하게 찾아 학생들의 애로사항을 해결하기 위해 위치밴드를 제작하여 교과서에 기재된 줄자법과 전극 부착위치 찾는 방법을 비교하였다. 그 결과 피검자의 자세(앉은 자세 vs 누운 자세)에 따라 밴드법은 (196.7±61.8초 vs 200.2±49.3초), 줄자법은 (1281.0±457.4초 vs 1417.9±482.3초)로 앉은 자세일 때는 1084.3초(18.1분), 누운 자세일때는 1217.7초(20.3분)의 차이를 보여 줄자법보다 밴드법의 사용이 신속하다는 것을 확인하였다. 또한 전극 부착위치를 찾는데 영향을 줄 수 있는 교육과정 내의 뇌파 검사실습의 경험 유무와 피검자의 성별에 따른 차이에서도 밴드법은 줄자법보다 시간적인 차이가 적다는 것을 확인하였다. 본 연구에서 개발한 위치밴드를 사용한 줄자법을 사용하게 되면 대학의 교육과정에서 뇌파검사 실습시 애로사항이었던 전극 부착위치 찾는법을 신속하고 효율적으로 해결할 수 있다는 것을 확인하였고, 임상에서 신규 임상병리사들에게 교육하는데 적용도가 높을 것으로 사료된다. 다만 International 10~20 electrode system의 줄자법과 마찬가지로 전극 부착위치에 대한 정확성을 판정하는 기준에 대해서는 좀 더 연구가 필요할 것이다.