• The Journal of Fisheries Business Administration
• /
• v.50 no.2
• /
• pp.57-74
• /
• 2019

This study is aimed to evaluate the technology levels of shellfish farming in southern coast of Korea and status analysis on research of shellfish aquaculture. With achieving these objectives, it will be possible to present the direction of shellfish farming research and related project. Five major breed of shellfish aquaculture that would be adaptive and sustainable were proposed through consultation and agreement with professional group with more than 15 years of working experience. Moreover also evaluated that levels of technology, industry and market are also evaluated. The evaluation result of the expert group showed that the shellfish farming level occupied the third place in comparison with the US, Japan, Europe, and China. It is estimated that about 13~14 years will reach the level of the highest on average. In addition, most countries are expected to grow by about 10% on average over the next five years. Based on the result of the analysis of 670 research projects (2008~2017), there was little research on climate change and shellfish aquaculture. Besides some of shellfish have not been studied since 2008 and 2013, so it can be mentioned as a future task to be overcome.

• Journal of Energy Engineering
• /
• v.27 no.3
• /
• pp.57-62
• /
• 2018

The development of coal-fired power plants to ensure energy security and electricity consumption is a matter for the Vietnam economy. However, the huge amount of ash discharged is a major environmental challenge. It is estimated that by the end of 2017, the amount of ash in the country is about 40 million tons and annually emitted over 16.4 million tons. While the quantity of coal-fired power plant is rising, the ash content will increase year by year if the ash doesn't treat well. The ash will be increased from 61 million tons in 2018 to 109 million tons in 2020, 248 million tons in 2025 and 422 million tons in 2030. The difficulties of coal-fired power plants are the problem of ash handling, some plants are at risk of closure because there are not enough dump capacity to storage. Therefore, Vietnam is in need of urgent measures to treat a large amount of waste from coal-fired power plants. The specific objectives of this study were as follows: (1) provide an overview of coal ash situation produced by coal-fired power plants in Vietnam; (2) study about regulations related to coal ash treatment; (3) comprehend the literature review of the cement sector status.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.70-78
• /
• 2012

For evaluating the printing suitability of electronic copying papers in the aspect of climate conditions, 12 samples of copying papers being generally used in Korea and worldwide were collected. The copying papers were controlled by various temperature and humidity options in conditioning equipment in order to simulate the specific circumstances of dry, temperate or tropical climate, and the pre-heating system of photocopying machines during printing. As results, some copying papers showed several physical problems, especially in recycled copying papers and a normal paper with original printing faulty. These problems of copying papers were mostly resulted in extremely high moisture circumstance, and in lower levels of tensile strength and tensile stiffness. The moisture contents of copying papers during passing through the pre-heater system of photocopying machine could be rapidly decreased because paper is exposed to high temperature around the pre-heating zone. The copying paper, for example of XR3 sample, containing low moisture contents below 2% had high exfoliating possibility of toner transfer from copying paper.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2007

As DDI or GDI engine discharges very low heat due to its high thermal efficiency, the heat source is not enough for heating the passenger compartment in cold climate condition. To remedy the heating problem, the conventional HFC-134a automotive air-conditioning system has been attempted to run as a heat pump mode. Futhermore, an auxiliary electric heater of new type was equipped to the heat pump air-conditioning loop as a new approach. Hence, a proto-type heat pump air conditioner has been made and tested to investigate the feasibility of the HFC-134a automobile air-conditioning system that could be worked as a heat pump. The experiment results showed that the sufficient heating capacity could be obtained by adding a heat pump with an new electric type auxiliary heater into the conventional heat core in low temperature condition.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.4
• /
• pp.379-384
• /
• 2002

As automotive diesel engines adopt the direct injection method for a lower level of the exhaust emission and a higher fuel efficiency, the maximum temperature of engine coolant decreases. Consequently, the total available heat source from the engine coolant decreases over 35%. However, the heating source of air-conditioning system in automobiles depends on the hot engine coolant completely, so that it is nearly impossible to control air conditioning in heating season. Therefore, the present study has been carried out to develop the air conditioning system for the high efficient heat pump type using the HFC-134a. Especially, the air conditioning system of heating has been developed at a beginning stage, when it has low heat source from small and medium sized diesel recreation vehicles. To develop a control logic system for air conditioning system which is a heat pump type with a heat recovery exchanger, its cycle characteristics has been investigated according to the opening of LEV at a bench system.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.715-724
• /
• 2023

Solar energy forecasting is essential for (1) power system planning, management, and operation, requiring accurate predictions. It is crucial for (2) ensuring a continuous and sustainable power supply to customers and (3) optimizing the operation and control of renewable energy systems and the electricity market. Recently, research has been focusing on developing solar energy forecasting models that can provide daily plans for power usage and production and be verified in the electricity market. In these prediction models, various data, including solar energy generation and climate data, are chosen to be utilized in the forecasting process. The most commonly used climate data (such as temperature, relative humidity, precipitation, solar radiation, and wind speed) significantly influence the fluctuations in solar energy generation based on weather conditions. Therefore, this paper proposes a hybrid forecasting model by combining the strengths of the Prophet model and the GRU model, which exhibits excellent predictive performance. The forecasting periods for solar energy generation are tested in short-term (2 days, 7 days) and medium-term (15 days, 30 days) scenarios. The experimental results demonstrate that the proposed approach outperforms the conventional Prophet model by more than twice in terms of Root Mean Square Error (RMSE) and surpasses the modified GRU model by more than 1.5 times, showcasing superior performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.65-69
• /
• 2009

We studied to compare the fractionation patterns of Ni, Cu, Zn in Jeju volcanic ash soils and to elucidate the uptakes of them by Pakchoi(Brassica campestris var. chinensis). Fractionation patterns of soils by sequential extraction method were different and make to distinguish from various soil types. In Pakchoi, the transfer rates of Ni, Cu, Zn from root to shoot were also different by metal types. There are low corelation between fractional contents in soil and contents in plants of trace elements except for exchangeable Zn. It is needed to develop novel methods for the assessment soil Ni in relation to plant uptake because of poor corelation.

• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.65-75
• /
• 2019

The purpose of this study was to investigate the effects of safety culture on the safety awareness and safety behaviors of manufacturing workers, and to suggest ways for manufacturing workers to understand the safety culture and improve safety awareness and safety behavior. In order to verify this, data were collected from 282 research subjects for 1 month from August 1 to 31, 2018, using the manufacturing workers in the Seoul and Gyeonggi area as a population. The results of the study are as follows. First, the safety culture (safety climate, safety procedures) has a positive effect on the safety awareness (recognition of importance, interest and participation inducement) of the manufacturing workers. Second, the safety culture (safety climate, safety procedures) has a positive effect on the safety behavior (safety planning, safety check) of manufacturing workers. Third, safety awareness (recognition of importance, interest and inducement of participation) has a positive influence on the safety behavior (safety planning, safety check) of manufacturing workers. Fourth, the safety awareness (recognition of importance, interest and inducement of participation) appears to have a partial mediating effect in relation to safety culture (safety climate, safety procedure) and safety behavior (safety planning, safety check) of manufacturing workers. The implication of this study is that although the industrial accidents have occurred in the manufacturing industry in recent years, the studies on the workers in the manufacturing industry are insufficient. However, this study is meaningful that it has suggested ways for manufacturing workers to understand the safety culture and improve the safety awareness and safety behavior by analyzing the effects of safety culture on safety awareness and safety behavior of manufacturing workers.

• Journal of Climate Change Research
• /
• v.2 no.4
• /
• pp.297-307
• /
• 2011

This study investigates relation of food safety incidents with climate. Therefore food safety incidents and climate data during 1999 to 2009 have been analyzed. In situ observations of monthly mean temperature, maximum temperature, minimum temperature, precipitation, and relative humidity in 60 observation stations of Korean Meteorological Administration (KMA) have been used in this study. Food safety incidents data have been constructed by searching media reports following Park's method (2009) during the same period. According to the Park's method, 729 events were collected. To analyze its relations, food safety incidents data have been classified into chemical, biological, and physical hazards. Pearson product-moment correlation coefficients have been applied to analyze the relations. The correlation of food safety incidents has negative one with precipitation (-0.48), and positive one with minimum temperature(0.45). Precipitation has been correlated with biological and physical hazards more than chemical hazard. Temperatures (mean temperature, maximum temperature, and minimum temperature) have been correlated closely with chemical hazard than others. Food safety incidents data has been interblended with human behavior factor through decision-making processes in food manufacturing, processing, and consumption phases of "farm-totable" food processing. Act in the preventing damage will be obvious if the hazard were apparent. Therefore abnormal condition could be more dangerous than that of apparent extreme events because apparent events or extreme events become one of alarm over hazards. Therefore, human behavior should be considered as one of the important factors for analysis of food safety incidents. The result of this study can be used as a better case study for food safety researches related to climate change.

• Journal of Energy Engineering
• /
• v.27 no.3
• /
• pp.68-73
• /
• 2018

The cement industry is one of the rapidly growing industry in Ethiopia. The average per capita cement consumption of the country has increased from 39kg to 62kg. However, this is still way below than the global average per capita consumption of 500kg. The Ethiopian government is planning to expand its cement industry by upgrading the current cement plants and also opening of new cement plants in order to meet the future demand of the country. Currently, the number of cement plants in Ethiopia has reached to 20. By the year 2025, per capita cement consumption is expected to increase to 179kg. Recently, Ethiopia has become one of Africa's largest market for the cement industry. In addition, Ethiopia has become the major exporter of cement in the Sub-Saharan African region. The Ethiopian cement industry is highly dependent on the use of imported energy sources for its production. This situation has a significant amount of impact on the high production costs of the industry. This paper will try to review the history, production, available resources, the technologies and energy use of the Ethiopian cement industry.