• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.764-770
• /
• 1989

This paper analyze the steady state performance of a self-acting air lubricated slider bearing in hard disk/head system. Modified Reynolds' equation is derived from the steady state compressible Navier-Stokes equation, under slip-flow conditions. Finite difference technique and numerical procedure are described by using Newton-Raphson iteration method to slove the non-linear equations. These techniques are applied to conventional slider bearings and the effects of molecular mean free path(MMFP) for a recording surface of hard disk are shown. The calculation procedure developed here, wide applicabilities in practical head design procedures, and converges rapidly.

• Journal of Korea Trade
• /
• v.27 no.1
• /
• pp.101-118
• /
• 2023

Purpose - Korea became a trillion-dollar trading country in 2011. With the exponential increase in Korea's trade volume over the past decades, trade-related administrative burdens per capita for Korea Customs became enormous, for which the government established the Single Window, a trade-facilitating system, in 2004 to enhance the efficiency of customs-clearing procedures for traders. This paper focuses on finding whether the Korean Single Window system affects the country's trade facilitation positively through an empirical methodology. Design/methodology - To find empirical evidence that Single Window affects trade facilitation for the customs-clearing procedure, this study assumes that a time-efficient environment enables the handling of the increase in trade volume, under which four independent variables related to import customs-clearing procedures and two dependent variables to import were adopted for empirical analysis. The import customs procedures are classified into four steps from port entry to declaration acceptance. To understand the relationship between variables, scattered plots and correlation coefficients were calculated. Eight hypotheses were set and underwent simple linear regression. The data for analysis were collected by Korea Customs, and were about the lead time of import, the volume of imports in million USD, and the number of import declarations reported to customs offices on a monthly basis from 2005 to 2013. Findings - Six of the eight hypotheses showed the statistically significant result that lead time in the import customs-clearing procedure positively affects the number of import declaration reports and import volume. Specifically, Hypothesis 1, Hypothesis 2, and Hypothesis 3 strongly support the assumption lead time in import customs declaration has an inverse relationship with the number of import declarations, which means that the shorter the import lead time, the more import declaration increases. Research Limitations/Implications - With limited data accessibility to the government's custom-sclearing procedures, only the import lead time for customs clearance were adopted as independent variables. This paper, however, successfully found that the Single Window system contributed to trade facilitation. Originality/value - This study found that the time-saving Single Window system of Korea Customs enables itself to manage an exponentially-increasing trade volume by creating a trade-facilitating environment for customs personnel and traders, which may be a unique implication found through quantitative methodology.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.33-41
• /
• 1996

In order to study the effect of phenobarbital(PB) on the hepatic transport of diltiazem(DTZ), $Ca^{2+}$ channel blocker, we used isolated hepatocytes of rat which was intraperitoneally pretreated with phenobarbital sodium(75 mg/kg) for four days once a day. For the isolation of rat liver cells, a modification of the two step procedure of Seglen was used. DTZ was dissolved in incubation buffer to the final DTZ concentrations of 200, 400, 600, 800 and 1000 ng/ml in order to elucidate the uptake characteristics of DTZ by hepatocytes. Reactions were stopped at 10, 20, 30, 45, 60, 90, 120 and 300 sec. The initial velocity was determined by disappearance of diltiazem in the hepatocyte suspension. On the other hand, to determine the effect of PB on the in vitro hepatic intrinsic clearance of DTZ we obtained the metabolism rates of DTZ in the control and the PB-pretreated rat hepatocyte at various time intervals. According to pretreatment with PB, the size of hepatocyte and the amount of protein per $10^6$ cells were significantly (p<0.01) increased from $26.92{\pm}0.1364\;m$ to $35.31{\pm}1.00\;m$ and from $468{\pm}6.5\;{\mu}g/10^6$ cells to $628.8{\pm}12.1{\mu}g/10^6$ cells, respectively. In the case or hepatic uptake of diltiazem, $K_m$ was not different in the normalization by cell numbers and increased from $2.90\;{\mu}M\;to\;13.89\;{\mu}M$ in the normalization by protein amount. $V_max$ was increased regardless of normalization by protein amount and cell numbers, from $1.21\;{\mu}mole/min \;{\cdot}\;mg\;protein\;to\;3.96\;{\mu}mole/min\;{\cdot}\;mg\;protein\;and\;from\;2.38\;{\mu}mole/min\;{\cdot}\;10^6\;cells\;to\;2.83\;{\mu}mole/min\;{\cdot}\;10^6\;cells$, respectively. The in vitro hepatic intrinsic clearance of DTZ was significantly (p<0.01) increased from $0.640{\pm}0.038\;ml/mim\;{\cdot}\;10^6\;cells\;to\;2.385{\pm}0.212\;ml/min\;{\cdot}\;10^6\;cells$ due to PB-pretreatment. These results suggest that the uptake of DTZ by hepatocyte is extremely fast and PB enhances the hepatic intrinsic metabolic clearance of DTZ.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.3
• /
• pp.33-45
• /
• 2015

The oversea export of agricultural-product about item and quantity has not increased recently; especially the fresh-product has a tough issue because of period of production, price large fluctuations, customs clearance, quarantine, and uncertainty about actual locality, we need the information based construction to exchange information quickly about whole range of export and to focus capacity of participation subject for increasing the export. In this study we design the agricultural-product transaction information system based on crowdsourcing to transact the agricultural-product and the information of influencing benefit directly, and the information offering about export-procedure from participation of customs clearance, finance, distribution, buyer, and producer's guild, etc. We expect the producer's guild about agriculture that has not participate the trade to be able to export the agricultural-product and the stabilization of price to transact the product of collapsed or boomed through the agricultural-product information system based on crowdsourcing.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.2
• /
• pp.63-75
• /
• 2018

This paper proposes extension of Latin Hypercube Sampling (LHS) to avoid the necessity of using intervals with the same probability area where intervals with different probability areas are used. This method is called Weighted Latin Hypercube Sampling (WLHS). This paper describes equations and detail procedure necessary to apply weight function to WLHS. WLHS is verified through numerical examples by comparing the estimated distribution parameters with those from other methods such as Random Sampling and Latin Hypercube Sampling. WLHS provides more flexible way on selecting samples than LHS. Accuracy of WLHS estimation on distribution parameters is depending on the selection of weight function. The proposed WLHS is applied to seismically isolated structures in nuclear power plants. In this application, clearance-to-stops (CSs) calculated using LHS proposed by Huang et al. [1] and WLHS proposed in this paper, respectively, are compared to investigate the effect of choosing different sampling techniques.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.3
• /
• pp.167-183
• /
• 2010

This paper analyzes the backgrounds of the standards for protection against electric shock in Global Technical Regulations (GTR) of Fuel Cell Vehicle (FCV). Targets on research were high voltage criteria, safety current, isolation and grounding resistance, time limitation, energy, adequate clearance, and test procedure. Based on human impedance and effect of current in IEC 60479-1, safety of human was examined. Then, isolation and grounding circuit model of FCV were analyzed theoretically. The results give several suggestions: touch voltage less than 25V, AC energy less than 0.0813J, separation considering middle finger length, grounding resistance less than $0.2\Omega$, maximum AC ground voltage of 1V (rms), and isolation resistance between earth and electrical chassis. In MATLAB/Simulink environment, error characteristics of isolation resistance measurement procedure using internal DC sources were analyzed under variations of internal resistance of voltmeter and isolation resistance.

• Transactions of Materials Processing
• /
• v.30 no.6
• /
• pp.275-283
• /
• 2021

A parametric study was conducted on the effects of five fundamental design parameters on springback, including die clearance, step height, step width, punch radius, and taper relief in an L-bending process, controlled by the compression force. The experiment was also conducted to verify the usefulness of the parametric study procedure for process design, as well as the finite element predictions. The elastoplastic finite element method was utilized. The L-bending process of the york product, which is a key part of the breaker mechanism, was employed. The deformation of the material was assumed to be due to plane strain. Five samples of each design parameter were selected based on experiences in terms of process design. The finite element predictions were analyzed in detail to show a shortcut towards the process design improvement which can replace the traditional process design procedure relying on trial-and-errors. The improved process design was verified to meet all the requirements and the predictions and experiments were in good agreement.

• Tribology and Lubricants
• /
• v.18 no.4
• /
• pp.291-298
• /
• 2002

In this study, a numerical analysis f3r the piston secondary dynamics and lubrication characteristics of small refrigeration reciprocating compressors is presented. In general, the length of cylinder in this class of compressors is shortened to diminish the frictional losses of the piston-cylinder system. So, the contacting length between piston and cylinder wall is in variable with the rotating crank angle around the BDC of the reciprocating piston. In the problem formulation of the piston dynamics, the change in bearing length of the piston and all corresponding forces and moments are considered in order to determine the piston trajectory, velocity and acceleration at each step. A Newton-Raphson procedure was employed in solving the secondary dynamic equations of the piston. The developed computer program can be used to calculate the entire piston trajectory and the hydrodynamic forces and moments as functions of crank angle under compressor running conditions. The results explored the effects of the radial clearance, lubricant viscosity, and pin location on the stability of the piston, the oil leakage, and friction losses.

• Journal of Nutrition and Health
• /
• v.7 no.4
• /
• pp.30-32
• /
• 1974

Hemoglobinemia is found in hemolytic anemia, paroxysmal nocturnal hemolobinuria and paroxysmal hemoglobinuria. Recently increasing use of extracorporeal circulation in cardiac surgery has stimulated the development of more precise methods for rapidly evaluating the formation and clearance of extracoporeal hemoglobin. A spectrophotometric method of analysis seemed to offer the best solution to the requirements. The method presented is on the basis of hemoglobin derivatives converted to cyanmethemoglobin, and the absorbance is measured in a spectrophotometer at 540 and 680 nm. The blank value ismeasured at 680 nm while the absorbance at 540 nm measures the hemoglobin derivatives. This method estimates all the hemoglobin derivatives such as oxyhemoglobin, carboxyhemoglobin, methemoglobin, sulfhemoglobin and hemialbumin. The method was tested in recovery experiments, which is given table 1. A good degree of correlation was obtained in a comparision with the method described by Crosby and Furth for non-hemolyzed serum. The spectrophotometric technique described offers many advantages in speed and simplicity over the chemical procedure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.4
• /
• pp.31-40
• /
• 1986

With the tendency toward high speed and high pressure in centrifugal pumps, the problem of sub-synchronous vibration has arisen, caused by the hydraulic forces of the working fluid, such as wearring, balance piston, impeller, etc.. These forces can drastically alter the rotor critical speeds and stability characteristics, and can be acted significant destabilizing forces. For preventing such self-excited vibration, the desing of the rotor system needs, which would secure the stability of the machine. In this paper, a procedure is presented for dynamic modeling of rotor-bearing-seal-impeller systems which consist of rigid disks, distributed parameter finite rotor elements and discrete bearings, seals and impellers. A finite element model including the effects of rotatory inertia and gyroscopic moments is developed using the consistent matrix approach. The technique of dynamic matrix reduction is applied to the shaft matrices to reduce them to a set of matrices of dynamic of significantly fewer degrees of freedom. The representation of bearing, seal and impeller elements is in term of linearized stiffness and damping matrices by reasonably small perturbations from equilibrium. The stability behavior of a typical double suction centrifugal pump is presented. Results show the influence of clearance and flow conditions on running speeds and stability characteristics.