• 한국의류학회지
• /
• 제34권7호
• /
• pp.1162-1174
• /
• 2010

Excavated gold brocade, often shows signs of serious damage and contamination from environmental factors such as exposure to soil or human remains. Therefore, most of the conservation procedures are focused on the consolidation of the gold thread and on cleaning with water or organic solvents. Indiscreet cleaning using solvents could damage the gold leaf, which identifies the features of fabric. There is a need to develop cleaning protocols appropriate for relics through the careful analysis of the condition of the relics. This study finds the appropriate cleaning method for the excavated gold brocade. Four different cleaning methods, vacuum cleaning, kneaded rubber eraser cleaning, immersion wet cleaning, and absorption wet cleaning were applied to the excavated gold brocade. The degree of cleaning and damage were examined depending on the cleaning methods, changes to the physical condition (before and after cleaning) were also analyzed through the surface observation. Although immersion cleaning showed the best cleaning result, this method had a risk of damage to the gold thread. Absorption wet cleaning safely eliminated the various soluble contaminants and the rotten smell of relics. Kneaded rubber eraser was suitable for the excavated gold brocade fabric because it can be applied to selective parts, intentionally excluding some sensitive parts such as the gold thread. The vacuum cleaning method required special attention because of a possibility of suctioning off loosely attached gold leaf. Dual cleaning, the kneaded rubber eraser cleaning, followed by the absorption cleaning was the most effective method to preserve and clean excavated gold brocade.

• 한국컴퓨터정보학회논문지
• /
• 제14권11호
• /
• pp.31-40
• /
• 2009

가장 많이 활용하는 청소로봇의 청소기법은 크게 랜덤기법과 바둑판식기법으로 나눌 수 있다. 랜덤기법을 이용한 청소로봇은 장애물을 만날 때까지 직진 방향으로 청소를 수행하며, 장애물을 만나면 일정한 각도로 회전한 후 다시 직진 방향으로 청소를 수행한다. 랜덤기법은 중복적인 청소를 수행하는 문제가 빈번히 발생하며, 청소를 완료하는 데 오래 시간이 소요되는 단점이 있다. 바둑판식기법을 이용한 청소로봇은 장애물을 만날 때까지 직진 방향으로 청소를 수행하며, 장애물을 만나면 직진과 회전을 이용하여 청소가 수행되지 않은 위치로 이동하고, 이전에 청소를 수행한 방향의 반대로 청소를 수행한다. 바둑판식기법은 청소공간을 조밀하게 청소하며 진행하기 때문에 장애물이 없거나 작은 공간에서 작업 성능이 뛰어나다. 그러나 바둑판식기법으로 장애물이 있거나 복잡한 공간을 청소할 때는 청소시간이 증가한다. 그러므로 청소의 효율성을 증가시키기 위해서는 작업공간을 정확히 파악하여 청소를 계획적으로 진행해야 한다. 본 논문에서 제안한 가상지도 기반 청소로봇은 작업공간을 효율적으로 청소하는 특성을 갖는다. 시뮬레이션을 통해 제안한 기법의 효율성을 측정하였다.

• 청정기술
• /
• 제14권2호
• /
• pp.95-102
• /
• 2008

친환경적인 대체 세정제를 채택하기 위해서는 세정제의 세정성, 환경성, 경제성을 평가하여 체계적인 선정절차에 의거하여 도입 적용하여야 하며 객관적이고 효율적인 세정성 평가방법의 정립이 현시점에서 매우 중요하다. 따라서 본 연구에서는 여러 세정성 평가 방법들 중 광전자방출법(optically stimulated electron emission)(OSEE)을 활용한 세정성 평가에 관한 연구를 하였다. 실험에 사용된 오염물은 플럭스, 솔더, 그리스, 절삭유, 그리고 그리스 35%와 절삭유 65%을 혼합하여 만든 혼합 오염물로서 세정제에 의한 이들의 세정성을 평가하였다. 본 연구실에서 개발하였거나 조제한 세정제를 이용하여 세정 후 OSEE법 측정 결과와 중량법 및 접촉각측정법에 의한 세정성 평가방법을 비교 분석하였다. 본 연구 결과로 플럭스와 혼합오염물을 세정한 경우의 OSEE 세정효율은 중량법과 거의 유사한 결과를 나타내었지만, 솔더와 그리스 세정의 경우는 UV를 반사 또는 흡수하여 중량법과 비교할 수 없었다. 그리고 절삭유 세정의 경우 실질적으로 눈에 보일 정도로 피세정물 표면에 오염물이 남아 있음에도 불구하고 중량법 측정 시 100%의 세정효율을 보임으로써 중량법 측정의 한계를 보였지만 OSEE법으로는 미소잔류 절삭유의 존재를 측정할 수 있었다. 또한 OSEE법과 접촉각측정법의 세정성을 비교측정한 결과로 플럭스, 혼합 오염물 그리고 절삭유의 세정성 평가는 OSEE법과 접촉각측정법이 유사한 세정효율을 보여주었다. 그리고 솔더와 그리스 세정은 접촉각측정법이 OSEE법보다 더욱 정밀하게 세정성을 평가할 수 있는 것으로 판단되었다.

• Journal of Acupuncture Research
• /
• 제29권2호
• /
• pp.9-14
• /
• 2012

Objectives : This study was designed to evaluate the pesticide residue of herb medicine through high density ozone water cleaning system. Materials and Methods : We purchased ginseng(Panax ginseng) on market and sprayed pesticides (Diazinon) on ginseng. We analyzed pesticide residue according to washing methods(untreated, ozone water cleaning, ultrasonic cleaning, Water cleaning). As a result of each washing methods, in ozone water cleaning method pesticide residue was much less remained than in Ultrasonic Cleaning method and water cleaning method. Conclusions : High density ozone water cleaning is the best method for removing pesticides of herbal medicine.

• 한국인쇄학회지
• /
• 제15권2호
• /
• pp.1-4
• /
• 1997

Existing cleaning solvent using screen printing are the organic solvents including aromatic compounds carried with poisonous and stench. besides, Cleaning method of current screen printing are for the most part mixed cleaning method of dipping and polish. Using 1,1,1-TCE, CFC-113 alternative system cleaning solvent be substituted for existing cleaning solvent against screen printing ink measured the cleaning efficiency according to gravimetric analysis method and property change of gassamer according to Image Analyzer. Also, Cleaning process system carry with excellent cleaning efficiency studied which was proposed new cleaning process including ultrasonic cleaning process be substituted for existing mixed cleaning method of dipping and polish.

• 한국인쇄학회지
• /
• 제15권1호
• /
• pp.57-69
• /
• 1997

The field of printing to use pressurized ink using screen gossamer that is called screen printing. Existing cleaning solvents for the screen printing are the organic solvents containing aromatic compounds and stench. Also, Cleaning method of screen printing are for the most part mixed cleaning method of dipping and polish. In this study, we measured the cleaning efficiency by gravimetric analysis and the property change of gossamer by image analyzer using existing cleaning solvent. Also, we investigated a new cleaning process showing excellent cleaning efficiency using the ultrasonic and vibration cleaning method instead of the exsiting mixed cleaning method.

• 한국응용과학기술학회지
• /
• 제14권2호
• /
• pp.115-122
• /
• 1997

The field of printing use to pressurization ink using screen gassamer that is called screen printing. Existing cleaning solvent using screen printing are the organic solvents including aromatic compounds carried with poisonous and stench. Besides, cleaning method of current screen printing are for the most part mixed cleaning method of dipping and polish. Using 1,1,1-TCE, CFC-113 alternative system cleaning solvent be substituted for existing cleaning solvent against screen printing ink measured the cleaning efficiency according to gravimetric analysis method and property change of gassamer according to Image Analyzer. Also, Cleaning process system carry with excellent cleaning efficiency studied which was proposed new cleaning process including ultrasonic and vibration cleaning process be substituted for existing mixed cleaning method of dipping and polish.

• 복식문화연구
• /
• 제11권6호
• /
• pp.956-966
• /
• 2003

The purpose of study is to find out a suitable cleaning method for excavated textiles of Jeon-ui Lee(1570∼1647). The textiles were excavated from her tomb in 1997, and her descendents put them in a box without any treatment and kept them in the warehouse since then. We used two kinds of silk as samples, non-dyed and dyed textile. The experiment was performed by 8 kinds of wet cleaning and dry cleaning methods, an ultrasonic cleaner was used in the wet cleaning, decane and perchloroethylene were used as solvents in the dry cleaning. The use of the ultrasonic cleaner in the wet cleaning method did not show any damage to the fibers of the textiles and it not only cleaned well but also was safe for the fugitive dyes. It resulted in more effective cleaning when the detergent was used together. Therefore, it is effective to use the ultrasonic cleaning on the delicate historical textiles and helpful to the operator's safety and environment.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.8-14
• /
• 1997

The UV/O$_{3}$ dry cleaning has been well known in removing organic molecules. The UV/O$_{3}$ dry cleaning method was performed to clean the Si wafer surfaces and contact holes contaminated by organic molecules such as residual PR. During the cleaning process, the Si surfaces were analyzed with X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and ellipsometer. When the UV/O$_{3}$ dry cleaning at 200'C was performed for 3 minutes, the residual photoresist was almost removed on Si wafer surfaces, but Si surfaces were oxidized. For UV/O$_{3}$ application of contact hole cleaning, the contact string were formed using the equipment of ISRC (Inter-university Semiconductor Research Center). Before Al deposition, UV/O$_{3}$ (at 200.deg. C) dry cleaning was performed for 3 minutes. After metal annealing, the specific contact resistivity was measured. Because UV/O$_{3}$ dry cleaning removed organic contaminants in contact holes, the specific contact resistivity decreased. Each contact hole size was different, but the specific contact resistivities were all much the same. Thus, it is expected that the UV/O$_{3}$ dry cleaning method will be useful method of removal of the organic contaminants at smaller contact hole cleaning.

• Journal of Biosystems Engineering
• /
• 제31권4호
• /
• pp.376-384
• /
• 2006

This study was conducted to perform for comparative analysis of the cleaning efficiency on 3 kinds of cleaning liquid state, 3 steps of cleaning temperature $(45^{\circ}C,\;60^{\circ}C,\;70^{\circ}C,\;)$ and 6 steps of cleaning time (2.5, 5, 7.5, 10, 12.5, 15 minute). 3 kinds of cleaning liquid state are the non fluidized bed, liquid fluidized bed and liquid/solid fluidized bed. UV spectrophotometer was used in estimation of cleaning efficiency, which it is experimental equipment using the absorptiometric analysis method. Cleaning efficiency by cleaning time was increase from 2.5 minutes to 15 minutes, liquid/siolid fluidized bed was indicated the highest cleaning efficiency among the 3 kinds of cleaning liquid state and $70^{\circ}C$ of cleaning temperature at liquid/solid fluidized bed was indicated the highest cleaning efficiency as 98% among the 3 steps of cleaning temperature.