• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.627-632
• /
• 1998

This study deals with the effect on adhesive strength properties of waterproofing and reinforcing layer and mortar or concrete substrate applicated by epoxy resin anticorrosive and bonding materials. Properties of adhesive strength change condition of concrete substrate, temperature, moisture, curing and cleaning and so on. The purpose of this study is that it makes the estimation value of bond strength of concrete wall and epoxy resin layer when coated epoxy resin as anticorrosive materials for durability performance estimation depend on concrete watertightness, and when penetrated epoxy resin for the reinforcement of concrete used the carbon fiber sheet.

• Journal of the Korean Home Economics Association
• /
• v.40 no.8
• /
• pp.99-105
• /
• 2002

This study was to investigate the natural dyeing materials in domestic, trials to detect new Inula Britannica. An appropriate dyeing condition ;was bath ratio 1:20, 50% (o.w.f.)conc., $80^{\circ}C$, 50min. The K/S values of silk fabric was the most efficient for the pre-mordanting method. The value of dyed fabric was mostly dark, for the mordanting, the chroma was best clear when using the Cr-mordant, color difference was distinct when using the Fe-mordant. The antimicrobiality of Inula Britannica itself appeared as a 6mm halo zone, dyed fabric was excellent with result of over 90% in mordant. In the case of dye fastness, the drycleaning and wet cleaning fastness was excellent, rubbing and perspiration fastness was improved, and light fastness was over level 2.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.2
• /
• pp.200-208
• /
• 2003

The purpose of this study is to propose scientific data and to develop complex\ulcornermultifunctional fibers by applying microcapsules containing rosewood oil on wool fabric. Polyurea was used as wall material of microcapsules. The parameters for adoptable condition are 20min of agitation time, 5000rpm of agitation speed, 4% of emulsifier concentration according to the observation with SEM and particle analyzer. The melting peak of microcapsules was shown to be 280$^{\circ}C$ The amount of released rosewood from microcapsules at 25$^{\circ}C$ was below 1 % and at 40% was below 3%. Therefore, polyurea microcapsules is capable of preserving rosewood oil for long self-life at normal temperature. Antimicrobial activity to dry cleaning and ironing cycle of wool fabric treated with microcapsules were maintained.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1203-1210
• /
• 2007

Robots have begun to perform various tasks on replacing the human in the daily life such as cleaning, entertainments etc. In order to accomplish the effective performance of intricate and precise tasks, robot hand must have special capabilities, such as decision making in given condition, autonomy in unknown situation and stable manipulation of object. In this study, we addresses the development of a 3-fingered humanoid robot hand system. We execute static analysis, vibration analysis and flexible dynamics to reserve stability at the design. Grasp motion of the finger uses a linear actuator and gears. Motion can be distinguished into four parts depending on the grasping thin paper, sphere, and column. In each motion, we compare the displacement of the case to be rigid with the case to be flexible. As a result, manufactured and feasibility of the robot hand is validated through preliminary experiments.

• 보존과학연구
• /
• s.26
• /
• pp.5-25
• /
• 2005

A consideration number of investigation have begun to elucidate the essential role biological agents play in the deterioration of stone. What is becoming clear is that many factors affect the durability of stone. Physical, chemical, and biological agentsact in co-association, ranging from synergistic to antagonistic, to deteriorate stone. Biodeterioration has usually been considered to be a degradation process following the initial deterioration effects of inorganic agents, especially objects of cultural value such as pagoda, stature of Buddha etc. These agents were thought to condition stone surfaces for microbial contamination due to structural changes and enrichment of inorganic organic nutrient substrates. This report concentrates on the action of biodeteriogens from bacteria to algae and higher plants. Preventive and remedial methods are surveyed, as are a selection of chemical treatments.

• Journal of the Korean Society of Safety
• /
• v.8 no.3
• /
• pp.56-63
• /
• 1993

In this study the ultrasound which has the properties of mixing, surface cleaning effect, increasing of the effective reaction surface area and increasing of the effective collision frequency, was used to enhance the recovering efficiency of Cu from the Cu-ion containning waste water. The ultrasonic reactor used in this study was dsigned and constructed for improving the disadvantage of the existing ultrasonic reactor From the experimental result and its analysis. we obtained following conclusions. 1. The ultrasound increased the rate of electrochemical deposition to 582.2% in maximum at the Condition of 0.1M-CuSO$_4$and 2.1V-overpotential. 2. This study gave the possibility of the scale-up of ultrasonic reactor and In particular, ultrasonic reactor would be effective in treatment of waste water contains a low concentration of Cu ion.

• Journal of the Korean Home Economics Association
• /
• v.42 no.7
• /
• pp.55-61
• /
• 2004

The Purpose or this study was to determine the optimal dyeing condition or Chelidonium majus extracts onto silk fabrics. Among the various dyeing properties, the colorfastness of fabrics dyed with Chelidonium majus extracts was investigated in different conditions such as dyeing temperature, dyeing time, dyeing pH etc. We also tried to dye fabrics using the Chelidonium majus extracts which were lyophilized. Although mordant was not used, dyed fabrics showed relatively good dyeability and the main pigment of Chelidonium majus showed yellow vividly in the appropriate dyeing conditions. At a dyeing temperature above 40$^{\circ}C$, the $\Delta$E value increased but the yellowish tint decreased. The pH value of unadjusted Chelidonium majus extracts was 6.4, at which a deep yellow was obtained. The dye equilibrium was reached 40 minutes after dyeing. The colorfastness to washing and light was poor at 1-2 and 2-3, respectively, but the dry-cleaning fastness was good at 4-5.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.369-372
• /
• 2008

An experimental study is carried out to study two-phase vertically upward hydraulic transport of solid particles by water in a vertical and inclined (0${\sim}$60 degree) concentric annulus with rotation of the inner cylinder. Rheology of particulate suspensions in shear-thinning fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, and so on. Annular fluid velocities varied from 0.2 m/s to 1.5 m/s for the actual drilling operational condition. Macroscopic behavior of solid particles, averaged flow rate, and particle rising velocity are observed. Main parameters considered in this study were radius ratio, inner-pipe rotary speed, fluid flow regime, and particle injection rate. For both water and CMC solutions, the higher the concentration of the solid particles is, the larger the pressure gradients become

• Journal of the Korean Society of Costume
• /
• v.52 no.3
• /
• pp.19-27
• /
• 2002

This paper surveys the mordanting and dyeing properties of Sophora japonica L. Appropriate extraction, dyeing and mordanting condition of Sophora japonica L. were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of Sophora japonica L. solution was 367.6mn, rutin solution was 365.6mn. The color of Sophora japonica L. solution was affected at pH 2 and pH 8~9. The optimum temperature to extract Sophora japonica L. was during 1 hour in 8$0^{\circ}C$. The effective dyeing temperature and time of silk were 10$0^{\circ}C$, 60min. K/S value of dyeing fabrics was increased by pre-mordanting treatment, especially Fe, Sn, Cr. In the case of Sophora japonica L. light fastness was increased by Fe mordanting. Perspiration fastness was better in acidic solution than that in alkaline solution. Fastness to rubbing and dry-cleaning were good in general.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.110-115
• /
• 1998

An axisymmetric Navier-Stokes procedure has been developed to analyze the pulse jet flow in a ceramic filter unit for the dust dislodging process. Using Baldwin-Lomax turbulence model as a closure relationship, the SIAF(Scalar Implicit Approximate Factorization) algorithm together with the ${\delta}^k-Correction$ iterative time marching scheme is adopted to solve the unsteady compressible Navier-Stokes equations. After some validation tests, the code has been applied to solve the pulse jet flow and examine the effects of geometry and reservoir pressure condition on the pressure level inside the filter unit. To avoid dealing with the uncertainty of such factors as the cohesion of the collected dust and the adhesion of the dust to the medium and also to simplify the analysis, the filter wall is assumed to be impermeable. The results for various test cases are presented.