• 한국정보기술학회논문지
• /
• 제16권11호
• /
• pp.43-49
• /
• 2018

MCP 세척용 전자총을 개발하기 위하여 SIMION 프로그램을 이용하여 컴퓨터 시뮬레이션하였다. 표적인 MCP는 전자총의 전자방출원으로부터 180mm에 위치해 있고, MCP의 직경은 약 20mm이고, E, ${\phi}$, d1, d2 등 4개의 변수를 이용하여, MCP에 도달하는 전자의 빔직경이 20mm가 되는 조건을 찾았다. 여기서 E는 MCP에 도달하는 전자의 에너지, ${\phi}$는 익스트랙터의 직경, d1과 d2는 각각 전자방출원에서 익스트랙터 관 끝까지의 거리, 전자방출원에서 쳄버 벽까지의 거리이다. 컴퓨터 시뮬레이션한 결과, E와 d2는 빔직경에 거의 영향을 주지 않음을 확인하였다. 반면에 빔직경은 d1에 따라서는 매우 민감하게 변하고, ${\phi}$에 따라서도 다소 크게 변함을 알 수 있었고, d1은 ${\phi}$와 2차함수의 관계가 있음을 알아내었다. 이 함수를 이용하여 본 연구의 목적에 적합한 전자총을 설계할 수 있음을 확인하였다.

• 환경위생공학
• /
• 제17권1호
• /
• pp.36-40
• /
• 2002

The purpose of study was to suggest an investigation of citizen's attitude on harmful insects in house. This study was consisted of four parts, such as basic investigation (housing shape, housing material, the period of house constructed, a cleaning condition), condition of kitchen, condition of living room condition of bathroom. The environmental pollution was increased by the development of industry and urbanization in modern. And also the clean of house has related with air quality such as pollutants and harmful insects etc. Because dwelling shape of urban come to be crowded, shut tightly and high buildings, the air quality of indoor was gradually polluted by several irregular cause. In one of housing pollution, the harmful insects was important any other than indoor air pollution. The problems of kitchen were the odor of food waste, discharge system of sewage and harmful insects. The important issues of living room were mold and construction materials, then important them of bathroom were easing nature and discharge system of sewage. A kind of the harmful insects in house investigated cockroach> mosquito> ant>fly. Finally, it appeared that the control of harmful insects can be applied to the improvement of indoor air pollutant which are difficult to be controlled in house.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2116-2121
• /
• 2008

Removal of particles at rich $CO_2$ condition has been important in the gas cleaning for $CO_2$ capture in Oxy-fuel combustion. Electrostatic precipitators (ESPs) have been widely used to remove particles in exhaust gases from present air combustion. However, few studies on characteristics of ESPs under a $CO_2$ rich gas condition have been conducted. In this study, we investigated integration of electrostatic precipitators (ESP) for removing submicron particles along with corona discharge characteristics and collection efficiency of submicron particles at $CO_2$ rich condition. The overall performance of ESP is represented by collection efficiency as function of energy consumption. The experiment results showed that higher the concentration of $CO_2$ gas, the corona discharge currents were lower at the same applied voltages and the spark over occurred at lower voltages, and the collection efficiency of submicron particles under 50, 80% $CO_2$ conditions was much lower than that under 100% Air.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.109-109
• /
• 2010

On-line partial discharge(PD) diagnostic system is the most prominent systems to diagnose insulation condition for the high voltage rotating machines. Partial discharge measuring system(PDMS) series with ceramic coupler(PD detecting sensor) installed hydro generator and high voltage motor have been measured the PD data for many years. The trend of PD magnitude in the on-line PD system increased for some machines. These machines showed a same result in the conventional off-line PD test and PD magnitude decreased after stator winding insulation cleaning. This case study show that PDMS has been proved to be good results by comparing PD magnitude with on-line and off-line PD test and it is important to plan the maintenance project for the hydro generator stator winding because PD value was decreased after insulation cleaning.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1639-1648
• /
• 1996

Protection of gas turbine blade from its erosion and abrasion at high temperature and pressure is the first goal to cleanup the hot gas upstream for IGCC and PFBC. Ceramic filters represent an attractive technology for particle removal at high temperature and high pressure condition. They have demonstrated being a good system for improvement of thermal efficiency and reduction of effluent pollutants in advanced coal-based power systems such as IGCC and PFBC. Ceramic filter elements currently being developed were evaluated in the previous paper. In this paper, we measured the ash size and distribution on cleaning of ceramic candle filter. The results are as follows : in this experimental range, ceramic candle filter was shown to be fully adequate for the removal process of dust under high temperature and pressure. Also filtration efficiency of ceramic candle filter was higher than 98% compared with the regulation limit of particle size in gas turbine inlet.

• 한국염색가공학회지
• /
• 제10권4호
• /
• pp.1-6
• /
• 1998

It is important in the durable water and oil repellent finishing for wool fabric what kinds of water-repellent agents will be used. Water repellent agents and its concentration were aleady chosen in the previous paper, one of the crosslinking agents which has less damages(harsh handle or yellowing) to the treated fabrics was a low molecular weight urethane-based resins(eg. Elastron BN-11). In repellent finishing, fabrics were padded in a bath which contained aqueous solution of water-repellent agents, and crosslinking agents, and wetting agents, followed by drying and curing. The most suitable treating condition for excellent repellency and durability to dry-cleaning was as follows ： Fabrics are padded at liquor pick-up ratio of 50%, with aqueous solution which contained $30g/\ell$ of water-repellent agents, and $1g/\ell$ of crosslinking agents, and 40g/s of wetting agents. And the padded fabrics were dried at $110^\circ{C}$ for 1 minute, and cured at $160^\circ{C}$ for 1 minute. For the fabrics, water and oil repellencies and durability to repeated dry-cleanings were observed. For enhancing the durability to dry-cleaning, the role of crosslinking agents was important for they bonds water-repellent agents and fibers to 3-dimensional net structure. Therefore, the most suitable drying and curing conditions should be selected according to the kinds of crosslinking agents.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.824-830
• /
• 2006

Several tests were conducted to optimize the design parameters of ln-situ soil flushing processes for diesel contaminated soil. According to the batch extraction test for three anionic surfactants evaluation, Calgonit limiting bubble occurrence was selected for its higher oil cleaning efficiency. After optimum surfactant selection, there were many sets of column flushing test. Over 70% of BTEX was removed in this surfactant dose with 400% of soil volume. In the case of no surfactant addition flushing in column, so called "blank flushing test", BTEX removal rate was 64%. But when we reused the effluent for the cleaning solution, the removal rate was decreased to 46.9%. This result showed reabsorption of oil occurred on the soil. With the addition of Calgonit solution to the diesel contaminated column, BTEX was removed up to 98.9% during the first flushing and 99.4% for the second recirculation flushing. In microcosm tests, diesel contaminated soils were cleaned by both surfactant flushing and biological activities. In anoxic condition, nitrate was used as an electron acceptor while the surfactant and the oil were used an electron donor. BTEX removal efficiency could be achieved up to 80% by biological degradation.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.113-120
• /
• 2012

Jacquard floor covering could be prepared from low-melting/regular sheath-core hybrid polyester, where the fiber is dyed in yarn state. With regard that the expected high shrinkage of the hybrid polyester in water makes problems in yarn dyeing, low-temperature dyeing properties of the hybrid polyester were studied. The rate of shrinkage of low-melting hybrid polyester exceeds 9% in hot water above $90^{\circ}C$, at such condition, cheese yarn dyeing is very difficult. Although disperse dyes exhaust in a relatively high speed on low-melting hybrid polyester, diffusion of these dyes to the core regular polyester was extremely slow under $90^{\circ}C$. Foron Blue E-BL 150, an anthraquinone E-type disperse dye, showed appreciable diffusion after 48hrs dyeing at $90^{\circ}C$. The fastness to rubbing and drycleaning were improved by one grade after reduction cleaning.

• 복식
• /
• 제58권9호
• /
• pp.129-141
• /
• 2008

Jikgeum(woven with supplementary golden wefts) hyungbae(rank badge) of danryung(official uniform) excavated from Im Backryung'tomb($1498{\sim}1546$) of the Joseon dynasty($1392{\sim}1910$) at Goyang, Gyunggi-Do in 2007, was in a critical condition because of serious collapse of substrate in metal thread. For conservation of hyungbae, metal thread was examined by different scientific methods(Light Microscope, Scanning Electron Microscope and Energy Dispersive X-Rray Spectrometry(SEM-EDS), Fourier Transform Infrared Spectroscopy(FT-IR)). Analytical data showed that metal thread was gilt membrane strip composed of gold leaves and proteinaceous substrate which was probably parchment. To protect collapse of substrate, 1% solution of Paraloid B-72 was infilterated into substrate for consolidation of substrate and it was adhered to warp of fabric in hyungbae, before wet cleaning. After wet cleaning, the most of the gold leaves were restored, which was confirmed by both the examination with the naked eye and the microscopic examination.