• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1335-1341
• /
• 2011

Conserving clean air and removing contaminants and particular matters accumulated in the ventilation system of the subway stations are key issue for green railway environment. There is no national guideline or industrial regulations to sustain clean duct and ventilation system, which requires rapid reformation of cleaning procedure and system. In fact, accumulated various particular matters and dusts can occur secondary air contamination and become a primary health harm factor for subway passengers. This study investigates various duct cleaning technologies and trends. In additon, effective cleaning method with an automated robot device is proposed. In particular, current dust cleaning technologies and duct cleaning robots are analyzed based on their functions and feasibilities. The proposed design of automated device is expected to save the operating cost of subway HVAC system and sustain clean air environment.

• 공기청정기술
• /
• 제10권3호통권38호
• /
• pp.61-74
• /
• 1997

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.537-540
• /
• 2008

A numerical study has been carried out on the optimization of an air cleaning system which was installed in a heating, ventilation and air conditioning system (HVAC) system of subway station for particle removal. Required particle removal efficiencies of three different air cleaning systems were calculated from ventilation rate, and indoor/outdoor concentration of PM10. Mass balance equations of PM10 were used to solve the required particle removal efficiencies. Fibrous filter was considered as an air cleaning system. Calculations were carried out about two different places which were waiting area and platform of subway station, respectively. This study proposed optimized design and operation condition of each air cleaning system.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.21-26
• /
• 2015

This study presents a development of the cleaning system in a nuclear power plant condenser. The tube cleaning system is very important equipment in a power plant condenser. Specially, removal of the fouling is a key process in the condenser tube. The objective of this study is development of a ball collector system for cleaning a condenser by using a sponge ball. This study uses CFD in order to optimize design of the ball strainer screen. Through the CFD, the implication of the ball strainer screen for static pressure distribution is examined. Results of research, this study have developed a 1/5 scale model for application to the power plant and developed a performance test equipment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.315-316
• /
• 2006

A new cleaning robot system for live-line tension insulator string was developed to prevent an insulator failure, which can have severe effects on national security as well as national industry and economy. The robot moves along the insulator string using the clamps installed on its two moving frames. Especially, unlike the existing cleaning robots using jets of water or water/air, the robot system adopts dry cleaning method using a rotating brush and a circular motion guide. This robot system has control architecture consisting of a master control unit and two slave control units. We confirmed its effectiveness through experiments.

• 디지털산업정보학회논문지
• /
• 제5권3호
• /
• pp.39-45
• /
• 2009

In this paper we present a cleaning robot system for an autonomous mobile robot. Our robot performs goal reaching tasks into unknown indoor environments by using sensor fusion. The robot's operation objective is to clean floor or any other applicable surface and to build a map of the surrounding environment for some further purpose such as finding the shortest path available. Using its cleaning robot system for an autonomous mobile robot can move in various modes and perform dexterous tasks. Performance of the cleaning robot system is better than a fixed base redundant robot in avoiding singularity and obstacle. Sensor fusion using the clean robot improves the performance of the robot with redundant freedom in workspace and Map-Building. In this paper, Map-building of the cleaning robot has been studied using sensor fusion. A sequence of this alternating task execution scheme enables the clean robot to execute various tasks efficiently. The proposed algorithm is experimentally verified and discussed with a cleaning robot, KCCR.

• 동력기계공학회지
• /
• 제21권4호
• /
• pp.26-33
• /
• 2017

In this paper, we developed a control algorithm to maximize the cleaning performance and the cleaning efficiency of the underwater cleaning robot platform which has been developed for various cistern environment in the industrial field. Through these research and development, we have presented the operation and application of underwater cleaning robots that have been developed, and contributed to commercialization. Finally, this results were verified the effectiveness through actual field experiments.

• 한국컴퓨터정보학회논문지
• /
• 제29권7호
• /
• pp.21-32
• /
• 2024

가죽제품 신발은 물 세척을 할 수 없기 때문에 물을 이용하지 않으면서 신발 내⋅외부의 이물질을 제거하고, 신발 내부를 살균할 수 있는 세척 방법이 필요하다. 이를 위해 이 논문에서는 물을 사용하지 않고 고압의 압축공기와 살균 약액 및 자외선 램프롤 이용하여 신발 내⋅외부를 신속하게 세척하는 신발세척기에서 신발 세척의 전 과정을 자동으로 제어하는 신발세척기 제어 시스템을 개발한다. 개발 시스템은 범용 단일보드 컴퓨터(SBC:single board computer)인 라즈베리파이(RaspberryPi)를 이용하여 신발 세척기의 각종 구동 장치들(actuators)을 제어한다. 개발 시스템에 의해 운영되는 신발 세척기는 1분 이내의 세척 시간에 99% 이상의 살균력과 86%이상의 악취제거 효율을 보여준다.

• 전자공학회논문지
• /
• 제51권8호
• /
• pp.195-201
• /
• 2014

본 논문에서는 도광판(LGP, Light Guide Panel)의 미세먼지 세정을 위해 건식 점착롤 제진과 코로나 대전을 이용한 제전(ESD, electrostatic discharge) 방식을 적용한 건식 세정 장치를 개발한다. 이를 위해 점착롤 제진과 제전 방식을 혼합 적용할 수 있는 세정 메커니즘을 설계하고, LGP를 자동으로 로딩/언로딩 및 이송할 수 있는 장치를 설계하고 구현한다. 그리고 이물질 및 미세먼지 세정 실험을 통해 개발된 시스템이 안정적으로 동작함을 확인하였다.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.66-75
• /
• 2007

To prevent an insulator failure, an automatic cleaning and inspection robot was developed for suspension insulator strings. The robot autonomously moves along the insulator string using the clamps installed on its two moving frames. Especially, unlike the existing cleaning robots using jets of water, the robot system adopts a dry cleaning method using rotating brushes and a circular motion guide. In addition, a mechanized brush bristles and a voltage-balancing contactor are devised to increase cleaning efficiency and to prevent arc generation under live-line conditions, respectively. We confirmed its effectiveness through experiments.