• Journal of the Korean Society of Costume
• /
• v.60 no.7
• /
• pp.88-102
• /
• 2010

The research examines the characteristics of the sewing methods used for women's Jeogori in modern Korea. The results are following. In the 1920s sewing of shoulder parts was started, and in the 1930s sewing by hand had reduced by dissemination of sewing-machine, and in the 1940s the Som-jeogori declined by the matter of economic and sanitary issues. In the 1950s four-fold sewing emerged, and during the 1960s the gause-lined triple-layered Jeogori was in fashion, and in the 1970s the Ggaeggi-jeogori and much elaborated Jeogori became in vogue. The characteristics of the sewing methods are changed by following factors. First, the dissemination of sewing-machine in the 1930's enabled fast and precise sewing of Jeogori which reduced the rate of clothes mending and the production period. Second, by development of washing method, the dry cleaning became common, resulting cleaner washing and better preservation. Third, introduction of western clothes gave rise to modernized Han-bok which was changed into practical and simple one. Fourth, by the introduction of synthetic textile and industry development, Jeogori with no armhole line or right Seop line was made using wide selection of textiles. Fifth, in 1945~60s, women learned' good wife and wise mother' education and the use of sewing machine in school. The clothing lifestyle affected the sewing method's change, for example, clothes sewed strongly by sewing machine not to take clothes apart, and attaching button instead of Go-reum to save clothes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.263-272
• /
• 2016

Modular product design has contributed to flexible product modification and development, production lead time reduction, and increasing product diversity. Modular product design aims to develop a product architecture that is composed of detachable modules. These modules are constructed by maximizing the similarity of components based on physical and functional interaction analysis among components. Accordingly, a systematic procedure for clustering the components, which is a main activity in modular product design, is proposed in this paper. The first phase in this procedure is to build a component-to-component correlation matrix by analyzing physical and functional interaction relations among the components. In the second phase, network flow modeling is applied to find clusters of components, maximizing their correlations. In the last phase, a network flow model formulated with linear programming is solved to find the clusters and to make them modular. Finally, the proposed procedure in this research and its application are illustrated with an example of modularization for a vacuum cleaner.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.179-199
• /
• 2012

Purpose: This study was conducted to prepare the fundamental data on oral hygiene of the elderly and to assess the behavior of oral hygiene, subjective oral health, oral health problem among the elderly, and to contribute to successful enhancement of life in their declining years. Methods: The author surveyed the behavior of oral hygiene, subjective oral health, oral health problem to 192 elderly at a health center of Busan using structured self- administered questionnaire from Nov. 2nd 2009 to Feb. 10th 2010. Collected data were analysed by SPSS WIN 18.0 statistical program for frequency, percentage production, ${\chi}^2$ (Chi-square) verification, t-test, One-way ANOVA, Logistic Regression. Results: The distribution of total subjects by oral health behaviors were 56.8% for "have ever trained how to tooth brushing", 76.6% for "correctly performed tooth brushing by himself ", 71.8% for "tooth brushing a day is two times and less", 87.5% for "it doesn't tooth brushing in meals and after" and 53.6% for "it doesn't use the facility for oral health", respectively. The distribution of total subjects by the state of perceived oral health were 51.0% for "feel the oral discomfort", 51.6% for "feel the comfortable chewing on starchy food", respectively. The mean point of perceived oral health by general characteristics of total subjects were statistically significant difference in sex, type of medical insurance, smoke, exercise, and chronic disease. The mean point of perceived oral health by oral health behaviors of total subjects were statistically significant difference in educational experience on tooth brushing, recognition for tooth brushing by himself, tooth brushing a day, and tongue cleaning. The risk factors of perceived oral health were type of medical insurance and chronic disease in general characteristics, tooth brushing in meals and after and tooth brushing a day, and tongue cleaning in oral health behaviors. Conclusion: The author recommend to the prevention of chronic disease, carry out the tooth brushing in meals and after, three times and over tooth brushing a day and tongue cleaning for oral health. and the author consider that it need to prepare the active countermeasure to oral health such as reeducation for oral health and supply to the tongue cleaner.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.2
• /
• pp.137-146
• /
• 2014

The practice of sustainability is an important subject to integrate into the management, product planning, manufacturing by textile and fashion companies as well as consumption by end-users. This study shows an evaluation scale designed to assess the practical cases in order to suggest efficient and systematic methods to fulfill the practice of sustainability in textile and fashion companies. First, companies should practice environmental sustainability to use eco-friendly material and cleaner production, protect the environment, and save natural resources. Second, social sustainability is required to fulfill social responsibility and ethical needs. Third, companies should perform various innovative activities, transparency in management, fair competition and economic contribution in the local community in order to maintain economic sustainability to survive in industry. Finally, cultural sustainability should be fulfilled by textile and fashion companies as part of the intellectual-cultural industry in a way that increases the importance of ethnic and cultural diversity. Textile and fashion companies should fulfill four environmental, social, and economic cultural sustainable subjects in a balanced method to accomplish sustainability. The concerns and practices of environmental sustainability are comparatively highly rated due to the analysis of the evaluation scale. However, cultural sustainability (a need of the times) is poorly rated and needs more attention. Therefore, the evaluation scale can be used as a standard tool to fulfill the sustainability of companies and brands from the viewpoint of improving poor and insufficiently sustainable items as well as balancing sustainability management.

• Clean Technology
• /
• v.17 no.4
• /
• pp.325-328
• /
• 2011

Atom-efficient preparation of 9, 9'-bis[4-(2'-hydroxy-3'-acryloyloxypropoxy) phenyl]fluorene (3), the extensively used building block for fluorene-containing acrylic epoxy polymers has been described. The epoxide ring opening esterification of 9, 9-bis[4-(glycidyloxy)phenyl]fluorene (1) with acrylic acid was catalyzed by some onium salts such as quaternary ammonium and phosphonium salts. While the coupling reactions depend greatly on the kind of the onium salts, the reaction of 9, 9-bis[4-(glycidyloxy)phenyl]fluorene (1) with acrylic acid proceed most efficiently in the presence of a catalytic amount of tetrabutylphosphonium bromide at $110^{\circ}C$ with 90% yield. This reaction is a cleaner reaction that minimizes the use of reactants and the production of chemical wastes.

• Clean Technology
• /
• v.14 no.4
• /
• pp.232-241
• /
• 2008

European directive DIRECTIVE 2002/96/EC requires minimum recycling & recovery rates on waste electrical and electronic equipment (WEEE). We tried to make references for recycling and recovery rates of parts and materials used in electrical and electronic equipment (EEE), which could be used to calculate recyclability and recoverability rates of a product in the development phase. First, we investigated recycling processes of WEEE and recycling and recovery characteristics of parts and materials. Based on the investigation results and the european recycling data, we made a data base of parts and materials for calculation of recycling and recovery rates of EEE. The developed DB was improved by reflecting advices of european experts.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.4
• /
• pp.167-174
• /
• 2005

The evaporation heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth horizontal stainless steel tube of 7.75 mm inner diameter. The experiments were conducted at mass flux of 200 to $500kg/m^2s$, saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed the evaporation heat transfer of $CO_2$ has greater effect on nucleate boiling than convective boiling. The evaporation heat transfer coefficient of $CO_2$ is highly dependent on the vapor quality, heat flux and saturation temperature. The evaporation heat transfer coefficient of $CO_2$ is very larger than that of R-22 and R-134a. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the correlation of Jung et al. But the existing correlations failed to predict the evaporation heat transfer coefficient of $CO_2$. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation heat transfer coefficient of $CO_2$ in a horizontal tube.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.407-417
• /
• 2021

This study aims to establish the relationship between the Green Marketing Orientation (GMO) variables and the performance of Green Small and Medium Enterprises (GSMEs) across the building and energy sectors in Malaysia, using customer satisfaction as a means of performance measurement. The GMO variables examined include Greening the Process (GTP), Green Supply Chain Management (GSCM), Green Strategic Policy Initiatives (GSPI), Proactive Energy Conservation (PEC) and Green Promotion (GP). The items used to measure these variables were extracted from literature and adapted to the context of the variables based on feedback from Focus Group Discussions and Expert Opinion sessions. This study employs a survey sample of 300 respondents but only 238 completed questionnaires were returned. The results reveal that GTP, GSCM and PEC have a positive impact on Customer Satisfaction but not GSPI and GP. The findings suggest that owners or managers of GSMEs should focus on maintaining and improving GTP, GSCM and PEC in order to create greater satisfaction among their customers. The significance of this study is that it enables the creation of a framework that enables GSMEs to design a pathway towards achieving a cleaner production of goods and services in line with United Nations Sustainable Development Goals.

• Clean Technology
• /
• v.15 no.1
• /
• pp.23-30
• /
• 2009

European directive DIRECTIVE 2002/96/EC requires the minimum recycling & recovery rate on the waste electrical and electronic equipments (WEEE). But, they do not have guidelines on the calculation methods for recycling and recovery rate. A standard method to calculate recyclability and recoverability rate of products in the designing stage is necessary for the manufacturers so that they can reflect the calculated result to the improvement of product design. In this work, we investigated the existing calculation methods for the recycling and recovery rates of WEEE and the recyclability and recoverability rates of electrical and electronic equipments (EEE). A method for the calculation of recyclability and recoverability rates for the EEE products in the development stage was developed. The newly-developed calculation method was applied to some EEE products and the calculated results were evaluated.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.214-230
• /
• 2022

This paper discusses the characteristics and background of the production of white porcelain with the "Byeol(別)" inscription. Such porcelain was produced by the government-run porcelain kiln, Gwanyo(官窯), in the 16th and 17th centuries (from the 1560s to the 1640s), during the Joseon dynasty. The white porcelain ware, inscribed with either the term Byeol or "jwa(左)" and "u(右)," constituted a dual production system of white porcelain by Gwanyo starting in the 1560s. However, to date, few studies have examined Byeol-inscribed white porcelain. This, therefore, makes it difficult to achieve a comprehensive understanding of the evolution of inscriptions on the white porcelain produced by Gwanyo in the 15th to 17th centuries. Besides a regular annual stock of porcelain(年例進上磁器), Gwanyo also produced and supplied additional porcelain ware, or Byeol-gi, at the behest of the royal family or the court of Joseon. Byeol-inscribed white porcelain is a form of Byeol-gi, produced through extra firing, or Byeolbeon(別燔). According to use, Byeol-gi can be categorized as an item for national use(國用) or an item for internal use(內用). However, if the porcelain only carries the "Byeol(別)" inscription, it is difficult to identify its characteristics. Furthermore, as part of the annual production of porcelain was for the supply of Byeol-gi, and then for other purposes, the white porcelain came to be inscribed with dots indicating a change in ownership. In the 16th century, the royal family increased its consumption of white porcelain based on Shinyu Gongan(辛酉貢案), the government's fiscal reform measures. To guarantee a stable supply of exceptional Byeol-gi in light of Gwanyo's decline in the 1560s, the royal family benefited from the inscription of "Byeol." The white porcelain produced by Gwanyo was divided into annual offerings-those with the inscriptions "jwa(左)" and "u(右)"-and Byeol-gi, those with the inscription of "Byeol." They were managed separately from the commencement of production. Byeol-inscribed white porcelain was produced until the 1640s. During the mid-and late 1640s, Byeolbeon was temporarily suspended. Starting in the 1650s, the white clay used to produce the annual stock of white porcelain was sourced from regions other than those providing the clay for Byeol-gi production. The former used clay from Wonju(原州土) and Seosan(瑞山土), while the latter used clay from Gyeongju(慶州土) and Seoncheon(宣川土). According to the literature, the clay from Gyeongju and Seoncheon was much cleaner than that from Wonju and Seosan. Byeolbeon thus underwent a transformation, whereby production was separately managed, right from the stage of white clay mining. Ultimately, the need for the separate management of Byeol-gi through inscriptions diminished, resulting in the disappearance of Byeol-inscribed white porcelain.