• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.233-247
• /
• 2012

We have researched the distribution and characteristics of seafloor hydrothermal deposits for the development of economic mineral deposits in the Lau Basin, Tonga since 2009. In this study, we interpreted hydrothermal alteration around TA 26 seamounts of the Tofua volcanic arc using X-ray diffraction analysis for bulk sample and preferred-oriented specimen of clay fraction. We used 2 core samples and several surface samples. Plagioclase and quartz are dominant mineral in the basement rock, whereas kaolin mineral and smectite are superior in marine surface sediments. Especially sulfate and sulfide minerals such as gypsum, barite, sphalerite, and pyrite are predominant in the vent sediments. When we compare the mineral composition between basement rock and sea surface sediments, argillic alteration zone composed of kaolin mineral and smectite could be produced by hydrothermal fluids. Based on the downcore variation of mineral assemblages, most portion of MC08H-06 core could be interpreted as argillic alteration zone composed of kaolin mineral and smectite except top 2 cm area. Various sulfate or sulfide minerals and argillic alteration zone suggest a high probability of massive sulfide deposits in the seafloor of the TA 26 seamount.

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.567-586
• /
• 1997

Concentrations of several heavy metals in soils derived from black shale and slate have been reported to be higher than the average concentrations in non-polluted soils. This study describes and characterizes soil minerals, and investigates the distribution of heavy metals in soils, and then examines their relationship. Soils in the study area are mainly consist of guartz and feldspars with minor amount of kaolin, illite, vermiculite, chlorite and illite-vermiculite interstratified minerals. Mineral compositions are similar in mountain-, farmland-, and paddy-soils. The residual soils derived from sandy phyllites contain less illites than those from black shale and black slate. Heavy metals appear to be more concentrated in soils than in rocks. The concentrate ratios in soils to rocks ranges 1.1 times for Cr, 2 for Cu, 1.4 for Ni. The contour maps of Cd, Zn, Pb, Cu contents using 0.43N $HNO_3$-extraction imply that these elements are highly concentrated in the soils near the past uranium exploration region, coal seams, black slate beds and tailings than other parts of the study area. The proportions of the day in most soils are less than 10%. In spite of small proportions of the clay, the concentrations of heavy metals from clay fractions to the total concentrations are high: 1~2.4 times for Co, 1.4~2.5 for Cu, 1.2~2.6 for Ni, 1~5 for Pb, 1~2.7 for Zn and 1.6~1.8 for Cr and V. The contents of organic carbons in clay fractions are also 1.5~3.9 times higher than in silt and sand fractions. Cu, Pb and organic carbons show positive relationship in all size fractions. In the size-fractionated soil profile samples, the contents of heavy metals and organic carbons show analogous trends with depth. For the clay fractions of soil profile samples, the contents of heavy metals with depth have analogous trends to abundances of vermiculites, which have the high CEC in main clay minerals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.1
• /
• pp.60-66
• /
• 1984

Immobilization and mineralization of the tracer nitrogen $^{15}(NH_4)_2SO_4$ applied in submerged soil condition with compost and rice straw to coarse loamy and clay soils were studied at different amounts of applied nitrogen. About 90-, 60-, and 50% of added nitrogen were immobilized at the 10 days of incubation when 0.8-, 1.6-, and 2.4mg of fertilizer nitrogen were added with compost and rice straw in both of coarse loamy and clay soils, respectively. Especially, more pronounced immobilization took place in coarse loamy soil than clay soil. Results obtained from nitrogen fraction showed that the mineral nitrogen was increased with addition of rice straw in clay soil than coarse loamy soil. The amount and index of aminosugar-N and humin-N were variable between soil series and organic matter. Especially, more pronounced amounts of amino acid-N and unknown-N were observed with application of rice straw in coarse loamy soil and compost in clay soil, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.147-159
• /
• 2002

Weathered bentonites occcur as surficial alterations of some domestic bentonite deposits in the Tertiary formations, with the thickness of less than about 50 cm, along naturally-formed weathering surface with slopping in gentle. 7 $\AA$-halloysite was found together with montmorillonite in the weathered bentonite. Compared to normal bentonite, the weathered one is generally more clay-rich and contains little amounts of original rock-forming minerals and residues. In the electron microscopy, fine-scale occurrence of the clay minerals tends to be somewhat discrete and segregated rather than closely associated. h curled margin of montmorillonite lamella is deformed to become obtuse in the weathered bentonite. Halloysite occurs as acicular to tubular crystals with the length of less than 2 $\mu$m and the width of about 0.3 $\mu$m, which commonly forms bundle-shaped aggregates. Electron microscopic observations on the fine-scale occurrence and texture of the wtathered bentonites indicate that the clay mineral transition from montmorillonite to halloysite has undergone without accompanying any intermediate phases of both clay minerals such as a mixed-layered type (M/H). The alteration reaction between these two clay minerals probably took place in the form of dissolution and precipitation mechanism in oxidation condition. An intense chemical leaching of SiO$_2$, Na, K and Ca might occur during the alteration reaction, forming a lot of dissolution cavity and residual concentration of A1$_2$O$_3$ and Fe, relatively. As the result of the chemical change, a fsvorable condition for halloysite formation seemed to be provided.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.307-320
• /
• 2020

This study focuses on the raw material characteristics, including firing temperature and the similarity of clay body, and making techniques on the underwater ceramics from offshore of Taean Mado, the Republic of Korea. The ceramic specimens include various types of celadons, Buncheongwares and white porcelains with very similar physical characteristics. All the clay bodies composed of same mineral phases within mullite and quartz, while cristobalite were also found in some white porcelains. Also, the geochemical composition of the clay body shows regular behavior properties for all the elements consisting of the celadons and Buncheongwares. In contrast, the irregular properties of trace and incompatible elements were found in white porcelains. Therefore, it is presumed that the white porcelains were made using the clay body with different source from the celadons and Buncheongwares. Notably, some white porcelains in low Th content are assumed to be made with clay formed in a different environments. Meanwhile, most of the ceramics had gone through the firing of 1,200 to 1,300℃, with some celadons fired from 1,150℃ to 1,200℃. Also, it can be interpreted as some white porcelains were fired on even up to 1,500℃.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.511-520
• /
• 2016

The purpose of this study was to estimate the firing temperature of fired clay brick by applying high temperature X-ray diffraction(XRD) analysis. The clay bricks, which were excavated from a Buddhist temple in Karatepa, Uzbekistan were composed of quartz, plagioclase, alkali feldspar, mica, chlorite, limestone, hornblende, etc. Some clay bricks contained gypsum, which was presumed to have been used to improve the adhesive strength of the brick. Estimating the firing temperature using a geologic thermometer, the UZ-1 sample was identified as being in the quartz, plagioclase, pyroxene series, and the firing temperature was estimated to be $900-1200^{\circ}C$. On the other hand, applying the high temperature XRD method to the UZ-5 sample, it was found that the limestone was destroyed at $1000^{\circ}C$ and the diffraction peak of chlorite was weakened at $1050^{\circ}C$. Moreover, pyroxene series minerals developed at $1050^{\circ}C$ in the reproduction experiment. These results indicate that the clay bricks used in the temple were produced in a kiln that reached a temperature of more than $1000^{\circ}C$. Thus, high temperature XRD analysis can more accurately estimate firing temperatures as compared to the firing temperature mineral identification method and it can be used to determine the creation and extinction temperature range of minerals.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.208-217
• /
• 2011

The effects of pH and temperature on the removal of two dyes (neutral red; NR and malachite green oxalates; MG) from aqueous effluents using Maghnia montmorillonite clay in a batch adsorption process were investigated. The results showed the stability of the optical properties of MG in aqueous solution and adsorbed onto clay under wide range of pH 3-9. However, the interaction of NR dye with clay is accompanied by a red shift of the main absorption bands of monomer cations under pH range of 3-5, whereas, those of neutral form remains nearly constant over the pH range of 8-12. The optimal pH for favorable adsorption of the dyes, i.e. ${\geq}$90% has been achieved in aqueous solutions at 6 and 7 for NR and VM respectively. The most suitable adsorption temperatures were 298 and 318 K with maximum adsorption capacities of 465.13mg/g for NR and 459.89 mg/g for MG. The adsorption equilibrium results for both dyes follow Langmuir, Freundlich isotherms. The numerical values of the mean free energy $E_a$ of 4.472-5.559 kj/mol and 2.000-2.886 kj/mol for NR and MG respectively indicated physical adsorption. Various thermodynamic parameters, such as ${\Delta}H^{\circ}$, ${\Delta}S^{\circ}$, ${\Delta}G^{\circ}$ and Ea have been calculated. The data showed that the adsorption process is spontaneous and endothermic. The sticking probability model was further used to assess the potential feasibility of the clay mineral as an alternative adsorbent for organic ion pollutants in aqueous solution.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.44-53
• /
• 2007

The Jeonju-Il mine tailings contain large quantities of $SiO_2\;and\;Al_2O_3$ and lesser quantities of metallic components. In this study, we studied about the possibility of using mine tailings as a raw material in various industries. it was found that the sintered mine tailings had a good quality in every respect such as chromaticity, firing shrinkage and water absorption etc. Therefore if can substitute clay mineral in the ceramic industry. Also it can substitute about 2.94% of the raw materials of ordinary portland cement. We can use the coarse tailing as the fine aggregate for the ready-mixed mortar; and the fine tailing, as the filler for the bituminous paving mixture; because both products were not only suitable for Korea industrial standard in quality, but also environmentally harmless.

• Economic and Environmental Geology
• /
• v.24 no.2
• /
• pp.83-96
• /
• 1991

Haenam pyrophyllite deposit occurred in the rhyolitic tuff of late Cretaceous age is located in the northern part of Haenam-gun, Jeonranam-do. The ore of the Haenam deposit is predominantly composed of pyrophyllite and illite accompanying such clay minerals as kaolinite, chlorite, and smectite. Pyrophyllite ore at the center of altered mass is often associated with kaolin minerals and high temperature minerals such as corundum, andalusite, and diaspore. On the basis of mineral assemblage the Haenam deposit can be devided into three alteration zones from the center to the margin of the deposit; the pyrophyllite zone, kaolinite zone, and illite zone. All alteration zones are associated with appreciable amounts of chalcedonic quartz. Those mineral assemblages indicate that hydrothermal solution which produced the Haenam deposit is strongly acidic solution with high silica and hydrogen activity and low $SO_4{^{2-}}$ activity. Discriminant analysis shows that $Na_2O$, $K_2O$, and $Al_2O$, of major elements are discriminant elements which classify alteration zones, while in case of trace elements Cr, Ni, and Sr turned out to be discriminant elements in this deposit. According to the mineral assemblage and illite geothermometry, pyrophyllite ore is considered to have been formed at about $240-290^{\circ}C$. K-Ar isotopic age for illite from this deposit indicates that it was formed at much the same age of later stage volcanics in the area, suggesting that the hydrothermal alteration of these deposits is associated with later volcanism of the area.