• 한국농공학회논문집
• /
• 제48권7호
• /
• pp.45-52
• /
• 2006

A cyclic viscoelastic-viscoplastic constitutive model for clay is incorporated into an effective stress based seismic response analysis to describe viscous effect of clay layer to sand layer during earthquake. The seismic response against main shock of 1995 Hyogoken Nambu Earthquake is analyzed in the present study. Acceleration responses in both clay layer and just upper liquefiable sand layer are damped due to viscous effect of clay. A cyclic viscoelastic-viscoplastic constitutive model for clay was implemented into a FEM code, and $Newmark{\beta}$ method was employed for the time discretization in the finite element formulation. Seismic responses were simulated by numerical method with recorded data at Port Island, Kobe, Japan. As results of this study, it was found that a cyclic viscoelastic-viscoplastic constitutive model can give good description of dynamic behavior characteristics including viscoelastic effect.

• 한국해양공학회지
• /
• 제38권1호
• /
• pp.30-42
• /
• 2024

This study examined the jack-up spudcan penetration for a new type of offshore wind substructure newly proposed using the jack-up concept to reduce construction costs. The jack-up spudcan for offshore wind turbines should be designed to penetrate a stable soil layer capable of supporting operational loads. This study evaluated multi-layered soil conditions using centrifuge tests: loose sand over clay and loose sand-clay-dense sand. The penetration resistance profiles of spudcan recorded at the centrifuge tests were compared with the ISO and InSafeJIP methods. In the tests, a spudcan punch-through effect slightly emerged under the sand-over-clay condition, and a spudcan squeezing effect occurred in the clay-over-sand layer. On the other hand, these two effects were not critically predicted using the ISO method, and the InSafeJIP result predicted only punch-through failure. Nevertheless, ISO and InSafeJIP methods were well-matched under the conditions of the clay layer beneath the sand and the penetration resistance profiles at the clay layer of centrifuge tests. Therefore, the ISO and InSafeJIP methods well predict the punch-through effect at the clay layer but have limitations for penetration resistance predictions at shallow depths and strong stratum soil below a weak layer.

• 한국토양비료학회지
• /
• 제49권6호
• /
• pp.807-812
• /
• 2016

Soil amendment, especially addition of clay minerals, has been widely conducted to improve the physical and chemical properties of cultivated soils. However, there are no systematic studies on the effects of the structural type of clay minerals added. This study was conducted to investigate the effects of structural type of clay minerals on physical properties of soils. Two experimental soils, layer-dominant and granule-dominant ones, were mixed with either a layer-type smectite or a granule-type zeolite at a level of 2.0 wt%. It was observed that water permeability of soils was decreased by smectite whereas not significantly changed by zeolite. This effect was much greater in layered clay-dominant soil than in granular clay-dominant soil. Our results clearly indicated that the relationship of structural type between a soil and an amendment plays a decisive role in the soil properties. Therefore, it is highly recommended that the structural types of both soil and amendment be taken into consideration for soil amendment by clay minerals.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.3-38
• /
• 2007

The depositional characteristics of Busan clay are initially described in this paper. The deposits of the Nakdong River estuary are composed of some different layers, which have been affected by marine transgression and regression. The upper clay layer is thick and soft. The lower clay layer and some depth of the upper clay layer have been leached by artesian pressure existing in an aquifer below. The clay shows unique physical and engineering characteristics due to leaching. Several large-scale reclamation projects have been performed in this delta area. The preloading method using long vertical drains has been applied for soft ground improvement. Experiences obtained from ground improvement are mentioned in connection with the depositional characteristics of the clay layers.

• Current Research on Agriculture and Life Sciences
• /
• 제2권
• /
• pp.98-108
• /
• 1984

Generally, in case of constructing the embankments on the soft clay layers, one-dimensional consolidation settlement under the assumption of a middle position stress in a single layer makes a great difference with the integral value, ie. the final settlement. Consequently, to find how many equal segments of the soft clay layer are needed to converge into the integral value and which position should be taken as a position of mean stress, authors compared the theoretical value of the settlement due to one-dimensional consolidation with the practical value of the settlement due to two dimensional consolidation. The obtained results are as follows. 1) The practical value of the two-dimensional consolidation settlement can be estimated by the 74-83% theoretical value of the one-dimensional consolidation settlement. 2) When the soft clay layer was cut into 8-16 equal segments according to the depth, one-dimensional consolidation settlement converge into the integral value. 3) Assuming a total soft clay layer as a single one, the depth of a mean stress position is 0.29-0.37 of the thickness of the total soft clay layer. 4) The Hyperbola Method which presumes the long-term settlement from the short-term practical value of settlement is credible, because all practical value of the settlement are in safe side of the standard error of estimation and the correlation coefficient is up to 0.95.

• 한국지반환경공학회 논문집
• /
• 제22권1호
• /
• pp.13-20
• /
• 2021

A suite of 3D large deformation finite element (FE) analyses was performed to investigate the load transfer mechanism and penetration resistance of spudcan foundations in heterogeneous soil profile consisting of sand and clay. The Elasto-Plastic models following Mohr-Coulomb and Tresca failure criteria were adopted for sand and clay, respectively. The accuracy of the numerical model was validated against centrifuge test measurements. The dense sand behavior with dilation is modeled using the non-associated flow rule. An investigation study consisting of key parameters, which includes variation in soil stratigraphy (sand-clay, sand-clay-sand), strength parameters of sand and clay (��' and su) and normalized height ratio of the sand layer (Hs/D) was conducted to assess the penetration behavior of spudcan. Based on calculated outputs, it was demonstrated that these parameters have a significant influence on the penetration resistance of spudcan. The calculated penetration resistance profiles are compared with the published (sand overlying clay) analytical model. It is confirmed that for the case of two-layer soil, the available theoretical model provides an accurate estimate of peak penetration resistance (qpeak). In the case of three-layer soil, the presence of a third stiff layer affects the penetration resistance profile due to the squeezing of the soil.

• 한국지형학회지
• /
• 제25권4호
• /
• pp.77-88
• /
• 2018

Wetlandsis developing on the lava plateau in Eundae-ri, even though there are no majorstreams into this area. As a result of drilling, 1~2m clay layer is founded under the superficial formations of the wetland, which are the main reasons for formation of the wetlands by limiting vertical drainage. The clay layer's Granulometry/XRD show very different characteristics from in situ weathering of basalt, and since 2~3cm of sand layer exist within the profile, the clay layer seems to be supplied and deposited from outside through surface/sheet flows. To keep the wetlands sustainably, the supply of water into the wetlands has to be increased by restoring the surface/sheet flow which is limited or deformed by pavement road.

• 한국지반신소재학회논문집
• /
• 제3권2호
• /
• pp.23-29
• /
• 2004

폐기물 매립지 최종복토의 주요 기능중 하나는 매립지 내부로 우수의 침투를 억제하는 것이다. 이러한 기능을 담당하는 차단층은 폐기물 관리법상 다짐점토층(45cm)의 단독포설이나 다짐점토층(30cm)상부에 HDPE를 복합으로 포설하도록 되어 있다. 그러나 바닥층 사면부에서와 같이 최종복토층 끝단 사면부에서 다짐점토층의 포설이 어렵다는 문제점이 있다. 따라서 본 연구에서는 토목합성물질 사이에 차수성이 뛰어난 벤토나이트를 삽입한 토목합성수지점토라이너(Geosynthetic Clay Liner; GCL)를 다짐점토층 대신 적용하여 최종복토 끝단 사면부에서 차단층으로서의 적용가능성을 평가해 보고자 HELP 분석과 사면에서의 안정성 검토, 환경적 내구성 검토를 수행하였다. 그 결과 GCL이 기존의 다짐점토층보다 안정된 결과를 나타내고 있어 GCL을 최종복토의 차단층으로서 사용하도록 제안하고자 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.731-738
• /
• 2002

Recently, as large constructions on the coast are performed frequently, surface layer stabilization method which Is one of the improvement methods for dredged soft clay has been applied. However, there have been few studies about the surface layer stabilization method. The purpose of this study is to clarify characteristics of ultra-soft marine clay and hardening agent. Also, optimal mixture ratio of hardening agent was verified through the laboratory tests such as statistical analysis and pilot tests. Laboratory tests were performed with proper hardening agent and test soil and standard mixing tables of hardening agent were determined according to ground conditions through statistical analysis. Also, applicability of surface layer stabilization method to field was verified by pilot tests. From the results of the tests, it was found that hardening agent materials such as cement, slag, fly-ash, inorganic salts, arwin, gypsum etc. affect on the appearing compressive strength. It was defined optimal mixture ratio which satisfies the required compressive strength from the statistical analysis. Also, It was compared the effect of ground improvement by cements and hardening agents through the pilot tests. This study will serve as data for design or construction criteria of stabilization of surface layer on ultra-soft marine clay.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.53-58
• /
• 2001

Constructions on the soft clay layer of low strength and high compression bring out many problems. Recent studies show that strength of the soft clay layer could be substantially improved by mixing quicklime. For the purpose, a series of uniaxial compression tests were performed, using quicklime, in order to analyze strength characteristics. The major test results are summarized following : When water content is 90%, the strength is observed to precipitously increase between 3～14 days, then, the extent slowly increase in relative terms. When water content is 130%, the strength is observed to precipitously increase up to 28 days. When the strength of water content 90% is compared to that of water content 130%, the initial strength of the former is higher than that of the latter. The analyses show that the improvement of soft clay layers can be realized by the mixture of both quicklime and sand, and by the mixture of quicklime only.